• Title/Summary/Keyword: Number concentration

검색결과 4,000건 처리시간 0.03초

분진의 개수농도 및 질량농도에 입각한 서울시 지하철 역사 내 오염원의 기여도 결정 (Determination of Source Contribution Based on Aerosol Number and Mass Concentration in the Seoul Subway Stations)

  • 최형욱;황인조;김신도;김동술
    • 한국대기환경학회지
    • /
    • 제20권1호
    • /
    • pp.17-31
    • /
    • 2004
  • The subway play an important part in serious traffic problems. However, because subway system is a closed environment, many serious air pollution problems occurred in subway stations and injured passenger's health. Therefor, it is a necessary to identify sources and to estimate pollutant sources in order to protect passenger's health and to keep clean subway environment. The purpose of this study was to analyze a air quality in the subway stations and to apply a new receptor methodology for quantitatively estimate of PM10 sources. In this study, the size distributions of particulate matters has been measured by using Aerosizer LD (U.S.A., API, Inc.). It's real time measurement capability of time-of-flight technique offers a significant advantage of user convenience and air pollution management. Also, the mass concentrations of PM 10 has been measured by using mini-vol portable sampler (U.S.A., Airmetrics Co.). The sampling performed in Seoul subway stations during the period of February 2000 and April 2000. The number distribution data used in this study consisted of 26 raw data sets in the Jongno-sam-ga station. Correlation Analysis can be used in subway stations for source separation and identification. Then, number contribution from each source is determined by the particle number balance (PNB). The mass concentration data used in this study consisted of 31 raw data in the 8 different stations. The mass contributions of PM10 sources in the concourse by using PMF/CMB model.

인삼 캘러스 현탁배양에 있어서의 염색체 이상 (Chromosome Aberration in Suspension Culture of Ginseng(Panax ginseng C. A. Meyer) Callus)

  • 박종범
    • 한국환경과학회지
    • /
    • 제15권12호
    • /
    • pp.1193-1197
    • /
    • 2006
  • This study was to examine the variations of chromosome number and the ranges of variety in the suspension culture of ginseng (Panax ginseng C. A. Meyer) callus cell, and the effect of plant hormones for the chromosome aberration. Plant hormones added with MS medium in the suspension culture were 2,4-D, kinetin, and 2,4-D+kinetin and concentration of the plant hormones were $1000{\mu}M$ and $0.1\;{\mu}M$ respectively. As a result of these experiment the following conclusion has been obtained. Media contained with 2,4-D+kinetin in $10{\mu}M$ concentration was very effective in the suspension culture result from 26.4% mitosis frequency, and found the various variation of chromosome number. Variety of chromosome number was diversed ($9\sim110$), espicially frequency of hypohaploid and hyperhaploid cells were very higher than hyperdiploid cells. In this experiments, it is suggested that $10{\mu}M$ 2,4-D+kinetin added with medium in the suspension culture of ginseng callus was effect in the variations of chromosome number.

THERMAL DIFFUSION AND RADIATION EFFECTS ON UNSTEADY MHD FREE CONVECTION HEAT AND MASS TRANSFER FLOW PAST A LINEARLY ACCELERATED VERTICAL POROUS PLATE WITH VARIABLE TEMPERATURE AND MASS DIFFUSION

  • Venkateswarlu, M.;Ramana Reddy, G.V.;Lakshmi, D.V.
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제18권3호
    • /
    • pp.257-268
    • /
    • 2014
  • The objective of the present study is to investigate thermal diffusion and radiation effects on unsteady MHD flow past a linearly accelerated vertical porous plate with variable temperature and also with variable mass diffusion in presence of heat source or sink under the influence of applied transverse magnetic field. The fluid considered here is a gray, absorbing/emitting radiation but a non-scattering medium. At time t > 0, the plate is linearly accelerated with a velocity $u=u_0t$ in its own plane. And at the same time, plate temperature and concentration levels near the plate raised linearly with time t. The dimensionless governing equations involved in the present analysis are solved using the closed analytical method. The velocity, temperature, concentration, skin-friction, the rate or heat transfer and the rate of mass transfer are studied through graphs in terms of different physical parameters like magnetic field parameter (M), radiation parameter (R), Schmidt parameter (Sc), Soret number (So), Heat source parameter (S), Prandtl number (Pr), thermal Grashof number (Gr), mass Grashof number (Gm) and time (t).

The 2D Measurement of Soot Diameter and Number Density in a Diesel Engine Using Laser Induced Methods

  • Lee, Myung-Jun;Yeom, Jung-Kuk;Ha, Jong-Yul;Chung, Sung-Sik
    • Journal of Mechanical Science and Technology
    • /
    • 제15권9호
    • /
    • pp.1311-1318
    • /
    • 2001
  • It is necessary to diagnose accurately the characteristics of soot formation and oxidation in a diesel engine. Whereas past measurement techniques for soot concentration give limited information for soot, laser-based two-dimensional imaging diagnostics have a potential to provide temporally and spatially superior resolved measurements of the soot distribution. The technique using laser sheet beam has been applied to an optically accessible diesel engine for the quantitative measurement of soot. The results provided the information for reduction of soot from the diesel engine. Both LIS (Laser Induced Scattering) and LII (Laser Induced Incandescence) techniques were used simultaneously in this study. The images of LIS and LII showed the quantitative distribution of the soot concentration in the diesel engine. In this study, several results were obtained by the simultaneous measurements of LIS and LII technique. The diameter and number density of soot in combustion chamber of the test engine were obtained from ATDC 20 degree to 110 degree. The soot diameter increased about 37% between ATDC 20 degree and 110 degree. The number density of soot, however, decreased significantly between ATDC 40 degree and 70 degree.

  • PDF

중성자 소각 산란(Small Angle Neutron Scattering)을 이용한 모델 고분자 미셀의 구조 분석 (Structure analysis of polymeric micelles using SANS)

  • 태기융
    • 한국진공학회지
    • /
    • 제14권3호
    • /
    • pp.115-118
    • /
    • 2005
  • 모델 고분자 미셀(서로 결합하거나, 결합하지 않는 두 경우)의 구조를 분석하기 위해 중성자 소각 산란(small angle neutron scattering)법을 이용하였다. 소수성 결합체의 응집수와 농도의 증가에 따른 정렬상태의 변화를 폴리에틸렌글라이콜(PEG, 6 K나 10 K고몰 분자량) 끝에 불화알킬그룹(pefluoroalkyl groups $(-(CH_2)_2C_OnF_{2n+1}$, (n = 6, 8,혹은 10)이 붙은 고분자용액을 이용하여 분석하였다. 결합체의 응집수는 소수성 말단기의 길이에 의해서만 주로 결정이 되고, 고분자의 농도나 온도에 의해 영향을 받지 않는다. 또한, 서로 결합하는 고분자 미셀과, 서로 결합하지 않는 고분자 미셀간에도 결합수에는 차이가 없다. 이러한 모델계는 농도가 증가함에 따라서 체심 입방구조로 정렬된다.

탄소나노튜브 성장 실험실에서 CVD 밀폐 여부에 따른 공기 중 나노입자 농도 비교 (Comparison of Airborne Nanoparticle Concentrations between Carbon Nanotubes Growth Laboratories based on Containment of CVD)

  • 하주현;신용철
    • 한국산업보건학회지
    • /
    • 제20권3호
    • /
    • pp.184-191
    • /
    • 2010
  • Although the usage of nanomaterials including carbon nanotubes (CNTs) has increased in various fields, scientific researches on workers' exposures and controls of these materials are very limited. The purpose of this study was to compare the airborne nanoparticles concentrations from two university laboratories conducting experiments of CNTs growth based on containment of thermal chemical vapor deposition (CVD). Airborne nanoparticle concentrations in three metrics (surface area concentration, particle number concentration, and mass concentrations) were measured by task using three direct reading instruments. In a laboratory where CVD was not contained, the surface area concentration, number concentration and mass(PM$_1$) concentration of airborne nanoparticles were 1.5 to 3.5 times higher than those in the other laboratory where CVD was confined. The ratio of PM$_1$ concentration to total suspended particles(TSP) in the laboratory where CVD was not confined was about 4 times higher than that in the other laboratory. This indicates that CVD is a major source of airbone nanoparticles in the CNTs growth laboratories. In conclusion, researchers performing CNTs growth experiments in these laboratories were exposed to airborne nanoparticles levels higher than background levels, and their exposures in a laboratory with the unconfined CVD were higher than those in the other laboratory with the confined CVD. It is recommended that in the CNTs growth laboratories adequate controls including containment of CVD be implemented for minimizing researchers' exposures to airborne nanoparticles.

겨울철 황상 현상의 특징 (The Features Associated with the Yellow Sand Phenomenon Observed in Korea in Wintertime)

  • 전영신;김지영;부경온;김남욱
    • 한국대기환경학회지
    • /
    • 제16권5호
    • /
    • pp.487-497
    • /
    • 2000
  • Spring time is a favorable season to be easily observed the Yellow Sand phenomenon in East Asia. In particular most of the phenomenon tend to occur in April. However, Yellow Sand phenomenon was observed from almost the whole country of Korea in winter of 1966, 1977 and 1999. The features of the synoptic weather pattern in the source regions, air stream flow between the source region and Korea, the measurement of TSP concentration, aerosol size distribution, and chemical composition of snow samples associated with Yellow Sand phenomenon were investigated. The result showed the characteristic evolutionary feature of the synoptic system associated with Yellow Sand phenomena, that is, a strong low level wind mobilized the dust within 2 or 3 days before Yellow Sand phenomenon being observed in Seoul. The wind was remarkably intensified in the source region on January 24, 1999 under the strong pressure gradient, A trajectory analysis showed that the Yellow Sand particle could be reached to Korea within 2 days from the source region, Gobi desert, through Loess plateau and Loess deposition region. The TSP concentration at the top of Kwanak mountain during the Yellow Sand phenomenon is abruptly increasing than the monthly mean concentration. The size resolved number concentration of aerosols ranging from 0.3 to 25${\mu}{\textrm}{m}$ was analyzed during Yellow Sand episode. It was evident that aerosols were distinguished by particles in the range of 2-3 ${\mu}{\textrm}{m}$ to result in the abrupt increase in January 1999, After Yellow Sand phenomenon, there was heavy snow in Seoul. By the analysis of snow collected during that time, it was observed that both the Ca(sup)2+ concentration and pH were increased abnormally compared to those in the other winter season.

  • PDF

절임농도와 건조시간에 따른 가지장아찌의 저장 중 품질 특성 변화 (Changes in Quality Characteristics of Eggplant Pickles by Salt Content and Drying Time during Storage)

  • 최상아;조미숙
    • 한국식생활문화학회지
    • /
    • 제27권2호
    • /
    • pp.211-224
    • /
    • 2012
  • Eggplant pickles were classified into three groups based on salt concentration (1, 3, 5%) and three groups based on drying time (30, 60 and 120 minutes), followed by storage at $5^{\circ}C$ for 28 days. Raw eggplant contains 94.82% water content. The increase in salt concentration and drying time caused a decrease in the moisture content. Compared to the 0.27% ash content of raw eggplant, the ash content of eggplant pickles increased noticeably with increasing salt concentration due to penetration into the eggplant pickles. pH values decreased significantly as the levels of salt concentration and dying time increased (p<0.05). In terms of storage time, pH values decreased from 21 days. The variation in salinity increased significantly as the concentration of salt increased. Compared to normal pickles salted at 5.39% salinity, eggplant pickles constituted 0.27~0.77% (1%), 0.40~1.14% (3%), and 0.47~11.20% (5%) 'low-salinity' eggplant pickles. Reducing-sugar content differed on the dates of 7, 14 and 21 in drying time and at 3% salinity. Hardness differed at 30, 60, and 120M on the 28th and 1, 5% salt concentration. Resilience differed according to drying time and from dates of 0 to 14th. The number of total microbes decreased at low salinity. In terms of storage time, the number of microbes tended to decrease after the 21st. In the consumer preference test, lightness of 5%-30M was the highest value.

차량 주행 시 타이어와 도로의 경계면에서 발생하는 조대입자, 미세입자 및 초미세입자의 특성 연구 (Characterization of Coarse, Fine, and Ultrafine Particles Generated from the Interaction between the Tire and the Road Pavement)

  • 곽지현;이선엽;이석화
    • 한국대기환경학회지
    • /
    • 제29권5호
    • /
    • pp.656-667
    • /
    • 2013
  • The non-exhaust coarse, fine, and ultrafine particles were characterized by on-road driving measurements using a mobile sampling system. The on-road driving measurements under constant speed driving revealed that mass concentrations of roadway particles (RWPs) were distributed mainly in a size range of 2~3 ${\mu}m$ and slightly increased with increasing vehicle speed. Under braking conditions, the mode diameters of the particles were generally similar with those obtained under constant speed conditions. However, the PM concentrations emitted during braking condition were significantly higher than those produced under normal driving conditions. Higher number concentrations of ultrafine particles smaller than 70 nm were observed during braking conditions, and the number concentration of particles sampled 90 mm above the pavement was 6 times higher than that obtained 40 mm above the pavement. Under cornering conditions, the number concentrations of RWPs sampled 40 mm above the pavement surface were higher than those sampled 90 mm above the pavement. This might be explained that a nucleation burst of a lot of vapor evaporated from the interaction between the tire and the road pavement under braking conditions continuously occurred by cooling during the transport to the sampling height 90 mm, while, for the case of cornering situations, the ultrafine particle formation was completed before the transport to the sampling height of 40 mm.

합성고분자 첨가제에 의한 마찰저항감소효과의 퇴화에 관한 연구 (The Degradation of the Effect of Drag Reduction in Synthetic Polymer Solution)

  • 윤석만;최형진;김종보
    • 에너지공학
    • /
    • 제7권2호
    • /
    • pp.163-171
    • /
    • 1998
  • 고분자 첨가물의 퇴화는 시험용액의 고온상태에서 증가된다. 합성고분자용액의 퇴화에 대해 시간에 따른 온도와 고분자 농도의 영향을 알아보기 위해 6$0^{\circ}C$, 8$0^{\circ}C$의 온도와 100, 200, 400, 600 ppm의 다양한 고분자 농도에 따라 폐회로방식으로 실험적인 연구를 하였다. 퇴화효과는 기계적 퇴화보다 온도에 더 의존적임이 밝혀졌다. 마찰계수와 레이놀즈 수의 관계는 레이놀즈 수가 5만부터 15만까지의 범위에서 레이놀즈 수가 증가함에 따라 마찰계수가 감소하고, 저온에서 마찰은 Vi가의 최대마찰저항감소 점근선에 접근한다는 것을 보인다. 일정한 유량과 온도에 대해, 높은 고분자 농도에서 퇴화효과가 더 작게 밝혀졌다. 일정한 유량과 고분자 농도에 대해서는 퇴화율이 주로 온도에 영향받는 것으로 밝혀졌다. 8$0^{\circ}C$의 온도, 100 ppm의 고분자 농도에서 4시간후에 마찰저항 감소효과가 없어졌다. 그러나, 열적퇴화는 고분자 분자들간의 결합력을 증가시켜 주는 것으로 생각되는 계면활성제 같은 추가적인 물질을 이용하여 극복할 수 있을 것이다.

  • PDF