• Nuclear Engineering and Technology
• /
• 제47권5호
• /
• pp.567-578
• /
• 2015

In a nuclear reactor containment, wall condensation forms with noncondensable gases and their accumulation near the condensate film leads to a significant reduction in heat transfer. In the framework of nuclear reactor safety, the film condensation in the presence of noncondensable gases is of high relevance with regards to safety concerns as it is closely associated with peak pressure predictions for containment integrity and the performance of components installed for containment cooling in accident conditions. In the present study, CUPID code, which has been developed by KAERI for the analysis of transient two-phase flows in nuclear reactor components, is improved for simulating film condensation in the presence of noncondensable gases. In order to evaluate the condensate heat transfer accurately in a large system using the two-fluid model, a mass diffusion model, a liquid film model, and a wall film condensation model were implemented into CUPID. For the condensation simulation, a wall function approach with a heat/mass transfer analogy was applied in order to save computational time without considerable refinement for the boundary layer. This paper presents the implemented wall film condensation model, and then introduces the simulation result using the improved CUPID for a conceptual condensation problem in a large system.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2162-2173
• /
• 2021

In this paper, the coupling of fine-mesh computational fluid dynamics (CFD) thermal-hydraulics (TH) code and neutronics code is achieved using the Ansys Fluent User Defined Function (UDF) for code development, including parallel meshing mapping, data computation, and data transfer. Also, some CFD schemes are designed for mesh mapping and data transfer to guarantee physical conservation in the coupling computation. Because there is no rigorous research that gives robust guidance on the various CFD schemes that must be obtained before the fine-mesh coupling computation, this work presents a quantitative analysis of the CFD meshing and mapping schemes to improve the accuracy of the value and location of key physical prediction. Furthermore, the effect of the sub-pin scale coupling computation is also studied. It is observed that even the pin-resolved coupling computation can also create a large deviation in the maximum value and spatial locations, which also proves the significance of the research on mesh mapping and data transfer for CFD code in a coupling computation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권6호
• /
• pp.759-764
• /
• 2001

This study was carried out to investigate the effect of activation timing, cell cycle and passage on the development of embryos produced by cumulus cell nuclear transfer in Hanwoo (Korean cattle). Nuclear donor cumulus cells were cultured in Dulbecco's modified Eagle medium supplemented with 10% fetal bovine serum at $38.5^{\circ}C$ in a humidified atmosphere of 5% $CO_2$ in air. The 1~6 passages of serum deprived or actively dividing cumulus cells were isolated and used as donor cells. The in vitro matured oocytes were enucleated and then the isolated donor cells were introduced. One pulse of 180 volts for $15{\mu}s$ was applied to induce the fusion between karyoplast and cytoplast. The activation was done before or after the fusion. To activate, oocytes were treated with $10{\mu}M$ calcium ionophore for 5 min immediately followed by 2 mM 6-dimethylaminopurine for 3 h. The nuclear transfer embryos were cultured in $500{\mu}l$ of modified CRlaa supplemented with 3 mg/ml BSA in four well dish covered with mineral oil. After 3 days culture, culture medium was changed into modified CRlaa medium containing 1.5 mg/ml BSA and 5% FBS for 4 days. The incubation environment was 5% $CO_2$, 5% $O_2$, 90% $N_2$ at $38.5^{\circ}C$. There was no blastocyst formation when the nuclear transfer embryos were activated before the fusion, whereas, 29.9% of blastocyst formation was shown when the nuclear transfer embryos were activated after the fusion. When serum deprived and actively dividing cumulus cells were used as nuclear donor cells, the developmental rates to blastocyst were 38.5% and 40.6%, respectively. There was no significant difference between serum deprived and actively dividing cells in the developmental rates. The developmental rates to blastocyst according to 1~6 passages were 37.5~44.4%. However, there were no significant differences among passages. These results indicate that 1~6 passage cumulus cell irrespective of cell cycle could support development of nuclear transfer embryos activated after the fusion.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1834-1845
• /
• 2021

Liquid lead-bismuth cooled fast reactor is one of the most promising reactor types among the fourth-generation nuclear energy systems. The flow and heat transfer characteristics of lead-bismuth eutectic (LBE) are completely different from ordinary fluids due to its special thermal properties, causing that the traditional Reynolds analogy is no longer recommended and appropriate. More accurate turbulence flow and heat transfer model for the liquid metal lead-bismuth should be developed and applied in CFD simulation. In this paper, a specific CFD solver for simulating the flow and heat transfer of liquid lead-bismuth based on the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model was developed based on the open source platform OpenFOAM. Then the advantage of proposed model was demonstrated and validated against a set of experimental data. Finally, the simulation of LBE turbulent flow and heat transfer in a 7-pin wire-wrapped rod bundle with the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model was carried out. The influence of wire on the flow and heat transfer characteristics and the three-dimensional distribution of key thermal hydraulic parameters such as temperature, cross-flow velocity and Nusselt number were studied and presented. Compared with the traditional SED model with a constant Pr_t = 1.5 or 2.0, the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model is more accurate on predicting the turbulence flow and heat transfer of liquid lead-bismuth. The average relative error of the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model is reduced by 11.1% at most under the simulation conditions in this paper. This work is meaningful for the thermal hydraulic analysis and structure design of fuel assembly in the liquid lead-bismuth cooled fast reactor.

• 한국수정란이식학회지
• /
• 제8권1호
• /
• pp.37-44
• /
• 1993

Nuclear transplantation techinque has been found to be the most potential and efficient method for producing a large number of genetically identical animals from a single embryo. The technical development of nuclear transplantation in mammals and its application to the production of cloned animals were reviewed. For the efficient and successful production of cloned embryos by nuclear transplantation, selection and micromanipulation of recipient eggs or embryos as capacious recipient cytoplasm, and benefitial preparation of multiple totipotent embryonic cells as donor nuclei, and also fusion technique are very critical. Recent works approaching to these critical points were introduced and discussed.

• 미생물학회지
• /
• 제29권1호
• /
• pp.8-15
• /
• 1991

Interspecific hybrids between the ASpergillus spp., A. awamori, A. usamii and A. oryzae, were obtained by nuclear transfer technique. Nuclei isolated from an auxotrophic mutant strain were transferred into the protoplasts of a recipient strain of different species. The frequency of interspecific hybrid formation by nuclear transfer was $2*10^{-5}$ $-7*10^{-4}$ In contrast, no interspecific hybrid was isolated by protoplast fusion. Among the hybrids tested, 10 strains showed increased activity of some or all components of cellulases, xylanases and amylase up to more than two times. Isozyme pattern of the hybrids were analyzed by polyacrylamide gel electrophoresis and isoelectric focusing followed by activity staining, which showed that some of the hybrids have isozyme patterns unidentical to either of the two parents. By measuring the DNA contents and the sizes ofthe conidia, the karyotypes of the hybrids were estimated to be aneuploid near to haploid, diploid or triploid. It was concluded that the unclear transfer technique is much more efficient in the formation of interspecific hybrids than protoplast fusion and is very useful for the improvement of Aspergillus strains.

• 한국수정란이식학회지
• /
• 제32권3호
• /
• pp.81-86
• /
• 2017

The Somatic cell nuclear transfer (SCNT) method can be applied to various fields such as species conservation, regenerative medicine, farming industries and drug production. However, the efficiency using SCNT is very low for many reasons. One of the troubles of SCNT is that it is highly dependent on the researcher's competence. For that reason, four somatic cell nuclear injection methods were compared to evaluate the effect of hole-sealing process and existence of cytochalasin B (CB) on efficiency of murine SCNT protocol. As a results, the microinjection with the hole-sealing process, the oocyte plasma membrane is inhaled with injection pipette, in HCZB with CB was presented to be the most efficient for the reconstructed in SCNT process. In addition, we demonstrated that the oocytes manipulated in Hepes-CZB medium (HCZB) with CB does not affect the developmental rate and the morphology of the blastocyst during the pre-implantation stage. For this reason, we suggest the microinjection involving hole-sealing in HCZB with CB could improve SCNT process efficiency.

• 한국미생물·생명공학회지
• /
• 제22권1호
• /
• pp.23-30
• /
• 1994

Intergeneric hybrids formed between Aspergillus oryzae var oryzae and Penicillium verruculosum F-3 were obtained by nuclear transfer technique. Several auxotrophic mutants isolated fromconidio-spores of the two strains mutagenized with ultraviolet and N-methyl-N-nitrosoguanidine. Optimal conditions for formation of intergeneric hybrids were investigated. Frequencies of hybrid formation by nuclear transfer were 3$\times $10$^{-5}$ $~$1$\times $10$^{-5}$. From observation of genetic stability, conidial size, DNA content, nuclear stain, it was suggested that their karyptypes are aneuploid. The hybrid posses the 1.3$~$2.2 fold higher amylase activities than those of parental strains. It was also revealed that some hybids had different isozyme patterns compared to those of parental strains by amylase activity assays.

• Nuclear Engineering and Technology
• /
• 제49권3호
• /
• pp.476-483
• /
• 2017

The decay heat that is produced by nuclear reactor spent fuel must be cooled in a spent fuel storage pool. A wickless heat pipe or a vertical two-phase closed thermosyphon (TPCT) is used to remove this decay heat. The objective of this research is to investigate the thermal performance of a prototype model for a large-scale vertical TPCT as a passive cooling system for a nuclear research reactor spent fuel storage pool. An experimental investigation and numerical simulation using RELAP5/MOD 3.2 were used to investigate the TPCT thermal performance. The effects of the initial pressure, filling ratio, and heat load were analyzed. Demineralized water was used as the TPCT working fluid. The cooled water was circulated in the water jacket as a cooling system. The experimental results show that the best thermal performance was obtained at a thermal resistance of $0.22^{\circ}C/W$, the lowest initial pressure, a filling ratio of 60%, and a high evaporator heat load. The simulation model that was experimentally validated showed a pattern and trend line similar to those of the experiment and can be used to predict the heat transfer phenomena of TPCT with varying inputs.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4102-4111
• /
• 2023

In order to better perform thermal hydraulic calculation and analysis of supercritical water reactor, based on the experimental data of supercritical water, the model training and predictive analysis of the heat transfer coefficient of supercritical water were carried out by using the support vector machine (SVM) algorithm. The changes in the prediction accuracy of the supercritical water heat transfer coefficient are analyzed by the changes of the regularization penalty parameter C, the slack variable epsilon and the Gaussian kernel function parameter gamma. The predicted value of the SVM model obtained after parameter optimization and the actual experimental test data are analyzed for data verification. The research results show that: the normalization of the data has a great influence on the prediction results. The slack variable has a relatively small influence on the accuracy change range of the predicted heat transfer coefficient. The change of gamma has the greatest impact on the accuracy of the heat transfer coefficient. Compared with the calculation results of traditional empirical formula methods, the trained algorithm model using SVM has smaller average error and standard deviations. Using the SVM trained algorithm model, the heat transfer coefficient of supercritical water can be effectively predicted and analyzed.