• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2113-2119
• /
• 2024

This study presents the development and characterization of a prototype TL/OSL reader for the retrospective dose assessment of individuals in radiological emergencies. The reader is portable, semi-automatic, and capable of accurate measurements. The dimension of the reader is 25 × 25 × 37 cm³ and the weight is about 15 kg. The reader consists of a sample moving stage, a heating module, an optical stimulation module, a detection module, a data acquisition (DAQ) unit, a nitrogen gas control module, and a PC with a GUI program. The reader has three measurement modes: TL, CW_OSL, and custom mode. The reader was characterized using commercial thermal luminescence dosimeters (TLD, LiF:Mg,Cu,Si) and optically stimulated dosimeters (OSLD, Al₂O₃:C), as well as fortuitous materials, such as display glasses and resistors of mobile phone. The results showed that the reader is capable of measuring signals with a detection limit of up to 0.02 mGy using a commercial dosimeter. In the dose recovery test using fortuitous materials, the reconstructed doses obtained three days post-irradiation closely aligned with the initially administered doses. As a result, this study suggests that the developed TL/OSL reader is a promising instrument for emergency dose assessment at accident sites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.367-373
• /
• 2017

The O2O service is an efficient way to operate based on systematic connection of the offline and online states. At present, education, health checkups, and exposure management of radiation workers are separated from offline and online at nuclear-related workplaces. Therefore, we developed a radiation workers management program at the workplace and tried to link online and offline states. After applying the program to the local network, we developed a written employee management system as a computer program and applied it to radiation workers and radiation safety managers at a university hospital in Daejeon using a questionnaire. As a result of the survey, the results of this program can enhance the awareness of safety management and work convenience. There is also a demand for radiation closed workers as well as radiation relative workers. It will be necessary to collect opinions regarding the characteristics of each workplace for the generalization of the radiation workers management program. As a result, real-time radiation safety management and work improvement can be expected through network connections between the workplace, supervisory authority, and related organizations in the future. If a circle structure is formed using the employee management program, development of radiation safety management can be expected.

• Animal cells and systems
• /
• v.12 no.4
• /
• pp.269-277
• /
• 2008

Siberian flying squirrel, an endangered species in South Korea, is distributed through major mountain regions of South Korea. The number of Siberian flying squirrel(Pteromys volans) in South Korea has decreased and their habitats are fragmented and isolated because of anthropogenic activities. So far no molecular genetic data has, however, been available for their conservation and management. To obtain better information concerning genetic diversity and phylogenetic relationships of the Siberian flying squirrel in South Korea, we examined 14 individuals from South Korea, 7 individuals from Russia, and 5 individuals from northeastern China along with previously published 29 haplotypes for 1,140 bp of the mtDNA cytochrome b gene. The 14 new individuals from South Korea had 7 haplotypes which were not observed in the regions of Russia and Hokkaido. The level of genetic diversity(0.616%) in the South Korean population was lower than that in eastern Russia(0.950%). The geographical distribution of mtDNA haplotypes and reduced median network confirmed that there are three major lineages of Siberian flying squirrel, occupying; Far Eastern, northern Eurasia, and the island of Hokkaido. The South Korean population only slightly distinct from the Eurasia, and eastern Russian population, and is part of the lineage Far Eastern. Based on these, we suggest that the South Korean population could be considered to belong to one partial ESU(Far Eastern) of three partial ESUs but a different management unit. However, the conservation priorities should be reconfirmed by nuclear genetic marker and ecological data.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.201-207
• /
• 2011

Peroxisome proliferator-activated receptors (PPARs) are members of nuclear receptors and their activation induces regulation of fatty acid storage and glucose metabolism. Therefore, the $PPAR\gamma$ is a major target for the treatment of type 2 diabetes mellitus. In order to generate pharmacophore model, 1080 known agonists database was constructed and a training set was selected. The Hypo7, selected from 10 hypotheses, contains four features: three hydrogen-bond acceptors (HBA) and one general hydrophobic (HY). This pharmacophore model was validated by using 862 test set compounds with a correlation coefficient of 0.903 between actual and estimated activity. Secondly, CatScramble method was used to verify the model. Hence, the validated Hypo7 was utilized for searching new lead compounds over 238,819 and 54,620 chemical structures in NCI and Maybridge database, respectively. Then the leads were selected by screening based on the pharmacophore model, predictive activity, and Lipinski's rules. Candidates were obtained and subsequently the binding affinities to $PPAR\gamma$ were investigated by the molecular docking simulations. Finally the best two compounds were presented and would be useful to treat type 2 diabetes.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.3
• /
• pp.191-197
• /
• 2017

The Korea Atomic Energy Research Institute (KAERI) has developed a safeguards technology for pyroprocessing based on the Safeguards-By-Design (SBD) concept. KAERI took part in a Member-State Support Program (MSSP) to establish a pyroprocessing safeguards approach. A Reference Engineering-scale Pyroprocessing Facility (REPF) concept was designed on which KAERI developed its safeguards system. Recently the REPF is being upgraded to the REPF+, a scaled-up facility. For assessment of the nuclear-material accountancy (NMA) system, KAERI has developed a simulation program named Pyroprocessing Material Flow and MUF Uncertainty Simulation (PYMUS). The PYMUS is currently being upgraded to include a Near-Real-Time Accountancy (NRTA) statistical analysis function. The Advanced Spent Fuel Conditioning Process Safeguards Neutron Counter (ASNC) has been updated as Non-Destructive Assay (NDA) equipment for input-material accountancy, and a Hybrid Induced-fission-based Pu-Accounting Instrument (HIPAI) has been developed for the NMA of uranium/transuranic (U/TRU) ingots. Currently, performance testing of Compton-suppressed Gamma-ray measurement, Laser-Induced Breakdown Spectroscopy (LIBS), and homogenization sampling are underway. These efforts will provide an essential basis for the realization of an advanced nuclear-fuel cycle in the ROK.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.51-62
• /
• 1993

A computational program ［TDET］ of the particle transport equation is developed on radiation shielding problem in two-dimensional cartesian geometry based on the discrete element method. Not like the ordinary discrete ordinates method, the quadrature set of angles is not fixed but steered by the spatially dependent angular fluxes. The angular dependence of the scattering source term in the particle transport equation is described by series expansion in spherical harmonics, and the energy dependence of the particles is considered as well. Three different benchmark tests are made for verification of TDET : For the ray effect analysis on a square absorber with a flat isotropic source, the results of TDET calculation are quite well conformed to those of MORSE-CG calculation while TDET ameliorates the ray effect more effectively than S$_{N}$ calculation. In the analysis of the streaming leakage through a narrow vacuum duct in a shield, TDET shows conspicuous and remarkable results of streaming leakage through the duct as well as MORSE-CG does, and quite better than S$_{N}$ calculation. In a realistic reactor shielding situation which treats in two cases of the isotropic scattering and of linearly anisotropic scattering with two groups of energy, TDET calculations show local ray effect between neighboring meshes compared with S$_{N}$ calculations in which the ray effect extends broadly over several meshes.eshes.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.157-164
• /
• 2013

In this study, the structural performance of nuclear power plant containment buildings, which are made of steel fiber reinforced concrete(SFRC) and subject to aircraft crash, is examined by finite element analyses. The applied loads by aircraft crash against the buildings are modeled using Riera impact load function and by the varying aircraft contact area with respect to time. CSCM concrete model in LS-DYNA is employed to model SFRC. The parameters for the material model are determined from SFRC strength prediction models. Based on the volume ratio of steel fiber in SFRC, the structural performance of nuclear containment buildings subject to aircraft crash are analysed using a commercial finite element analysis program LS-DYNA. The safety assessments of the buildings subject to the crash are discussed and the effectiveness of SFRC for nuclear power plant containment building on the increase of aircraft crash resistance is also evaluated.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.1
• /
• pp.30-38
• /
• 1989

Since the nuclear power plants in Korea have been operated in 1979, the nondestructive testing (NDT) of pressure vessels and/or piping welds plays an important role for maintaining the safety and integrity of the plants. Ultrasonic method is superior to the other NDT method in the viewpoint of the detectability of small flaw and accuracy to determine the locations, sizes, orientations, and shapes. As the service time of the nuclear power plants is increased, the radiation level from the components is getting higher. In order to get more quantitative and reliable results and secure the inspector from the exposure to high radiation level, automation of the ultrasonic equipments has been one of the important research and development(R & D) subject. In this research, it was attempted to visualize the shape of flaws presented inside the specimen using a Modified C-Scan technique. In order to develope Modified C-Scan technique, an automatic ultrasonic scanner and a module to control the scanner were designed and fabricated. IBM-PC/XT was interfaced to the module to control the scanner. Analog signals from the SONIC MARK II were digitized by Analog-Digital Converter(ADC 0800) for Modified C-Scan display. A computer program has been developed and has capability of automatic data acquisition and processing from the digital data, which consist of maximum amplitudes in each gate range and locations. The data from Modified C-Scan results was compared with shape from artificial defects using the developed system. Focal length of focused transducer was measured. The automatic ultrasonic equipment developed through this study is essential for more accurate, reliable, and repeatable ultrasonic experiments. If the scanner are modified to meet to appropriate purposes, it can be applied to automation of ultrasonic examination of nuclear power plants and helpful to the research on ultrasonic characterization of the materials.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.2
• /
• pp.59-63
• /
• 1998

Three different male-sterile cytoplasmic lines and their common maintainer 'Zhenshan 97B' and two elite restorer lines were used to study cytoplasmic effects on agronomic trait manifestation per se under different nitrogen supply levels. The result showed that cytoplasmic effects could be modified by nitrogen environments. The cytoplasmic effect on grain yield under 150 kg N/ha varied depending on crosses, while it was significantly negative in most crosses under both 60 and 330 kg N/ha. The correlation and path-coefficient analyses suggested that it was expected to improve cytoplasmic effects through reducing maximum tillers and increasing the percentage of productive tillers, leading to increased productive tillers and higher yield in hybrid rice by the aid of cultural practice and genetic transformation. This study also revealed that the same cytoplasm in different combinations had differential effect under the same nitrogen environment, indicating that cytoplasmic effect was produced by interaction of nuclear genes with cytoplasm rather than cytoplasm per se. These results indicated the usefulness of evaluating diverse cytoplasmic sources in various nuclear genotypes bred for hybrid rice breeding program. The finding also suggested that negative cytoplasmic effect could be effectively overcome by elite restorer lines through the interaction of nuclear genes with female cytoplasm.

• International Journal of Oral Biology
• /
• v.32 no.3
• /
• pp.109-112
• /
• 2007

Somatic cells nuclear transfer (SCNT) is a useful tool in studies of developmental biology and animal cloning. However, SCNT experiments only are allowed to skilled technical experts. In this experiment, laser-assisted zona pellucida piercing tool (LASER) was applied in murine SCNT. LASER minimized the use of piezo-driven micromanipulator (PIEZO), reducing chances of problems caused by PIEZO pulses. LASER reduced time that took to pierce zona pellucida in removal of nucleus from oocyte and somatic cell injection, which might have taken longer time with PIEZO. Time and difficulties that took researcher of equivalent skilled for their experiments were decreased with LASER, and this might affect the improvement of embryonic development. (LASER, 6.2% versus PIEZO, 2.9%; P<0.05). Thus, these data support that the use of LASER can be used for zona pellucida piercing in murine SCNT program as an alternative to PIEZO.