• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.288-289
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.290-291
• /
• 2005

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1373-1376
• /
• 2008

A supporting structure for a long tube bundle of a large diameter is considered in this paper. The primary purpose of the present study is to develop a spacer grid structure for a so-called "dual cooled nuclear fuel", which has been being studied for a nuclear power uprate. The outer diameter of the fuel rod increases considerably from the conventional one. So a completely new shape of the supporting structure (spacer grid) needs to be developed. One of the challenges is to insert a supporting tube into the cross points of the grid straps. To meet a supporting performance, the load vs. displacement characteristics should be obtained. So the present study focuses on the finite element analysis technology to evaluate the characteristics through a parametric study. As a result, major influencing parameters are investigated for an optimized spacer grid design.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1653-1661
• /
• 2012

본 논문에서는 냉각유동에 의한 SMART 핵연료집합체의 압력강하변화 및 구조특성을 연구하였다. 난류 모델인 BSL 레이놀즈 응력 모델로서 냉각수의 유동을 모델링하여 유체고체연계 해석을 수행하였다. 우선, 지지격자체에 지지된 핵연료봉의 진동해석을 수행하여 실험 결과와 비교하였는데 실험에서의 고유진동수는 48 Hz 로서 시뮬레이션 값과 2% 의 오차를 발생하였다. 핵연료집합체의 압력강하는 한국원자력연구원에서 수행한 실험적 값과 비교하여 8%의 오차가 발생하였고 해석의 타당성을 증명하였다. 유체해석에서는 집합체를 통과하는 각 구간의 유체 속도와 이차유동에 의한 와류생성과정을 관찰하였다. 마지막으로 진동해석과 유체해석의 연계를 통하여 유체유발진동에 의한 연료봉의 변위 값을 관찰하고 최대 변위가 발생하는 곳의 변위 PSD 를 계산하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.271-276
• /
• 1996

Coolant flow distribution to the assemblies and core coolant/component temperatures should be determined in LMR core steady state thermal-hydraulic performance analysis. Sodium flow is distributed to core assemblies with the overall goal of equalizing the peak cladding midwall temperatures for the peak temperature pin of each pin bundle, thus pin cladding damage accrual and pin reliability. The flow orificing analysis for conceptual design will be performed with Excel spreadsheet program ORFCE which was set up and tested, using the calibration factors based on available analyses data. For the verification of this program, flow orificing calculation for the MDP 840MWth core was performed. The calculational results are satisfactory compared to those of CRIEPI calculation.

• Nuclear Engineering and Technology
• /
• 제44권4호
• /
• pp.355-362
• /
• 2012

The aim of this study was to develop a bundle position-wise linear model (BPLM) to predict Pressure Tube (PT) diametral creep employing the previously measured PT diameters and operating conditions. There are twelve bundles in a fuel channel, and for each bundle a linear model was developed by using the dependent variables, such as the fast neutron fluences and the bundle coolant temperatures. The training data set was selected using the subtractive clustering method. The data of 39 channels that consist of 80 percent of a total of 49 measured channels from Units 2, 3, and 4 of the Wolsung nuclear plant in Korea were used to develop the BPLM. The data from the remaining 10 channels were used to test the developed BPLM. The BPLM was optimized by the maximum likelihood estimation method. The developed BPLM to predict PT diametral creep was verified using the operating data gathered from Units 2, 3, and 4. Two error components for the BPLM, which are the epistemic error and the aleatory error, were generated. The diametral creep prediction and two error components will be used for the generation of the regional overpower trip setpoint at the corresponding effective full power days. The root mean square (RMS) errors were also generated and compared to those from the current prediction method. The RMS errors were found to be less than the previous errors.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.503-506
• /
• 2005

The PWR Nuclear Fuel assembly consists of more than 250 fuel rods that are supported by leaf springs in the cells of more than 10 Spacer Grids (SG) along the rod length. Since it is not easy to conduct mechanical tests on a full-scale model basis, the small-scaled rod bundle (5$\times$5) is generally used for various performance tests during the development stage. As one of the small-scaled tests, a flow test should be carried out in order to verify the performance of the spacer grid like the coolant mixing performance and to obtain the Flow-Induced Vibration (FIV) characteristics of the rod bundle over the specified flow range. A vibration test should be also performed to obtain the modal parameters of the bundle prior to the flow test. In this study, we want to develop the estimation procedure of the damping ratio for the small scaled test bundle. For the damping factor of the rod bundle and the grid case at the first vibration mode, as one of the vibration tests, a so-called pluck testing has been performed in air as a preliminary test prior to in-flow damping measurement test. Logarithmic decrement method is used for calculation of the damping ratio. Estimated damping ratio of the rod bundle is about 0.7% with reasonable error of 2% for the previous results. Nonlinear behavior of the rod bundle might be stem mainly Iron the rod-grid support configuration.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.109-114
• /
• 1995

A preliminary study of the heterogeneity effect of spent P% fuel in CANDU was made using a reduced spent PWR fuel data base. The instantaneous core simulation has shown that the refueling ripple in the CANDU reactor is large if the spent PWR fuel is directly used. But the fuel heterogeneity effect can be reduced appreciably by blending spent PWR fuel with a small amount of fresh UO$_2$. The refueling simulation has shown that the operating margins of 6.0% and 8.7% are achievable for the peak channel and bundle powers, respectively, with the blended fuel.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.911-916
• /
• 2012

It is important to identify dynamic characteristics of nuclear fuel components. Since the fuel always exposed to turbulent flow, the dynamic contact between grids and rods is one of the fuel failure modes. The dynamic behavior of grids in nuclear fuels is quite complex, since two pairs of spring support are placed in the limited space. The strap in a cell has single spring and double dimples and this paper focuses on investigation of the grid strap(Test Fuel Strap, TFS) vibration in one cell. To identify the grid strap vibration, modal analysis of the strap is performed using Finite Element Method (FEM). Modal testing on a $5{\times}5$ grid structure without rods is performed. The modal testing results are compared to analytic results. In addition, random test considering rod effect is performed about a $5{\times}5$ grid with rods under real contact condition in the air. Finally, the strap vibration of a $5{\times}5$ fuel bundle in INvestigation of Flow INduced vIbraTion(INFINIT) facility is measured in real fluid velocity condition without heating. It is shown that modal frequencies from the test are almost equal to those peak frequencies in the INFINIT test.

• 설비공학논문집
• /
• 제28권5호
• /
• pp.186-194
• /
• 2016

As a turbulence-enhancing device, a mixing vane installed at a spacer grid of the fuel assembly plays a role in improving the convective heat transfer by generating either swirl flow in the subchannels or cross flow between fuel rod gaps. Therefore, both configuration and arrangement pattern of a mixing vane are important factors that determine the performance of a mixing vane. In this study, in order to examine the flow distribution features inside $5{\times}5$ fuel assembly with swirl-type mixing vanes used in benchmark calculation of OECD/NEA, simulations were conducted with commercial CFD software ANSYS CFX R.14. Predicted results were compared to data measured from MATiS-H (Measurement and Analysis of Turbulent Mixing in Subchannels-Horizontal) test facility. In addition, the effect of swirl-type mixing vanes on flow pattern inside the fuel assembly was described.