• Journal of Radiation Protection and Research
• /
• 제30권3호
• /
• pp.131-148
• /
• 2005

원자력 사고로 인한 비상시에는 적기에 주민 보호조치를 취해야 한다. 주민 보호조치에 대한 결정기준은 국제적으로 비용-이득 분석에 의해 산정된 일반개입준위와 일반조치준위를 사용토록 제안되어 있다. 운영개입준위는 이러한 일반준위를 직접 또는 쉽게 측정할 수 있는 물리량으로 나타낸 것이다. 비상시 보호조치의 필요성을 판단하기 위해서는 운영개입준위를 적용하고 수정하는 데 요구되는 환경감시 자료를 신속히 생산하는 것이 중요하다. 비상대응의 일환으로서 이를 위해 무슨 일들이 어떻게 수행되어야 하는지 고찰하였다. 비상시 환경감시를 효과적으로 수행하기 위해서는 평상시에 조직과 설비의 유지 관리, 각종 절차 수립, 지원용 전산체제 개발, 주기적인 교육과 훈련 등 철저한 준비가 필요하다. 일반개입준위와 운영개입준위에 관한 우리나라의 규정이 보완 또는 신설될 필요가 있음이 지적되었다.

• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.571-581
• /
• 1995

원자력 발전소의 비상운전절차서는 작성단계부터 난점이 많이 있고, 작성된 절차서를 착인 및 검증하는 데에도 많은 어려움이 따른다 캐나다의 원자력 규제기관인 AECB에서도 원자력발전소의 운전 허가를 받는 데 있어 발전소 비상운전 절차서를 하나의 요구조건으로 삼고 있는데, 그 요구조건은 발전소 내외의 비상상황에 대처하기 위한 상세한 계획 및 절차를 개발하는 것이다. 본 보고서에서는 미국의 원자력 발전소 비상운전 계획을 참고하고 있는 캐나다 원자력 발전소용 비상운전절차 표준지침서를 검토하고, 캐나다 비상운전 절차서 들의 현재 경향을 알아보았으며, 캔두형 발전소들의 비상운전 절차를 사고의 범위(개별적인 사고의 종류 지정), 사고진단 방법(사건 대응적, 징후 대응적, 또는 이 두 가지 방법의흔합형), 절차서 형식 등을 중점으로 비교 검토하고, 각 절차서의 내용을 포괄적으로 종합하여 현재 건설중인 월성 원자력 발전소 2, 3, 4호기용 비상운전절차서의 기본방향을 징후 대응적절차서(사고진단이 안될 경우 사용)와 논리도표와 문장이 혼합된 형식의 사건파악적절차서로 이루어진 비상운전절차서로 제시하였다.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1979-1990
• /
• 2021

Evacuation Time Estimate (ETE) can provide decision-makers with a likelihood to implement evacuation of a population with radiation exposure risk by a nuclear power plant. Thus, the ETE is essential for developing an emergency response preparedness. However, studies on ETE have not been conducted adequately in Korea to date. In this study, different cohorts were selected based on assumptions. Existing local data were collected to construct a multi-model network by TSIS-CORSIM code. Furthermore, several links were aggregated to make simple calculations, and post-processing was conducted for dealing with the stochastic property of TSIS-CORSIM. The average speed of each cohort was calculated by the link aggregation and post-processing, and the evacuation time was estimated. As a result, the average cohort-based evacuation time was estimated as 2.4-6.8 h, and the average clearance time from ten simulations in 26 km was calculated as 27.3 h. Through this study, uncertainty factors to ETE results, such as classifying cohorts, degree of model complexity, traffic volume outside of the network, were identified. Various studies related to these factors will be needed to improve ETE's methodology and obtain the reliability of ETE results.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1470-1476
• /
• 2019

The nuclear power plants in South Korea have been designed in accordance with the U.S. Regulatory Guide 1.60 (R.G 1.60) design spectrum of which the peak frequency range is 2-10 Hz. The characteristics of the earthquakes at the Korea nuclear power plant sites were observed to be closer to that of Central and Eastern United States (CEUS) than the R.G 1.60, which is a lower amplification in a low frequency range, and a higher amplification in a high frequency range. The possibility of failure for sensitive power plant components in the high frequency range has been considered and evaluated. In this study, in order to improve the reliability of nuclear plant and administrative control procedures, seismic tests of an emergency diesel generator (EDG) were conducted using a shaking table under both high and low frequency ranges. From the tests, oil/lubricant leaks from the bolt connections, the fuel filter and the fuel inlet were observed. Therefore, the check list of nuclear plant components after an earthquake should include bolt connections of EDG as well as anchor bolts.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2377-2386
• /
• 2021

To model the atmospheric dispersion of radionuclides released from nuclear accident is very important for nuclear emergency. But the uncertainty of model parameters, such as source term and meteorological data, may significantly affect the prediction accuracy. Data assimilation (DA) is usually used to improve the model prediction with the measurements. The paper proposed a parameter bias transformation method combined with Lagrangian puff model to perform DA. The method uses the transformation of coordinates to approximate the effect of parameters bias. The uncertainty of four model parameters is considered in the paper: release rate, wind speed, wind direction and plume height. And particle swarm optimization is used for searching the optimal parameters. Twin experiment and Kincaid experiment are used to evaluate the performance of the proposed method. The results show that the proposed method can effectively increase the reliability of model prediction and estimate the parameters. It has the advantage of clear concept and simple calculation. It will be useful for improving the result of atmospheric dispersion model at the early stage of nuclear emergency.

• Nuclear Engineering and Technology
• /
• 제38권3호
• /
• pp.231-238
• /
• 2006

Whole-body exposure to high-dose radiation causes injury involving multiple organs that depends on their sensitivity to radiation. This acute radiation syndrome (ARS) is caused by a brief exposure of a major part of the body to radiation at a relatively high dose rate. ARS is characterized by an initial prodromal stage, a latent symptom-free period, a critical or manifestation phase that usually takes one of four forms (three forms): hematologic, gastrointestinal, or cardiovascular and neurological (neurovascular), depending upon the exposure dose, and a recovery phase or death. One of the most important factors in treating victims exposed to radiation is the estimation of the exposure dose. When high-dose exposure is considered, initial dose estimation must be performed in order to make strategy decisions for treatment as soon as possible. Dose estimation can be based on onset and severity of prodromal symptoms, decline in absolute lymphocyte count post exposure, and chromosomal analysis of peripheral blood lymphocytes. Moreover, dose assessment on the basis of calculation from reconstruction of the radiation event may be required. Experience of a criticality accident occurring in 1999 at Tokai-mura, Japan, showed that ARS led to multiple organ failure (MOF). This article will review ARS and discuss the possible mechanisms of MOF developing from ARS.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.123-131
• /
• 2024

Electron paramagnetic resonance (EPR) dosimetry for a tooth from an individual exposed is well known as retrospective dosimetry in radiological accidents. A major constraint of the conventional X-band tooth-EPR dosimetry is the necessity to extract the tooth of the exposed patient for dose assessment. In this study, to conduct the dose assessments of exposed patients through part-extraction of tooth enamel, the minimum detectable dose (MDD) of the tooth enamel was evaluated based on the amount of mass. Further, a field test was conducted via intercomparison using various dose assessment methods to verify the feasibility of X-band tooth-EPR dosimetry using the minimum mass of tooth enamel. The intercomparison results demonstrated that effective dose determination via X-band tooth-EPR dosimetry is reliable. Consequently, it was determined that the minimum mass of tooth enamel required to evaluate an absorbed dose above 0.5 Gy is 15 mg. Thus, EPR dosimetry using 15 mg of tooth enamel can be applied in the triage and initial medical response stages for patients exposed during radiological accidents. This approach represents an advancement in managing radiological accidents by offering a more efficient and less invasive method of dose assessment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.143-145
• /
• 2007

The development of excitation control system (ECS) for emergency diesel generator in nuclear power plant is the replacement project of existing control system to resolve the maintenance problems caused by aging and obsolescence, The excitation control system is classified as a safety-related system. To guarantee the performance of developing excitation control system is equal to or higher than that of other systems, establishing the quality assurance scheme, doing software verification and validation activities, and planning equipment qualification. In this paper, we'd like to introduce the equipment qualification of excitation control system.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.217-222
• /
• 2007

An Emergency Diesel Generator (EDG) is one of the safety related equipments of a Nuclear Power Plant. The seismic capacity of an EDG in nuclear power plants influences the seismic safety of the plants significantly. A recent study showed that the increase of the seismic capacity of the EDG could reduce the core damage frequency (CDF) remarkably. It is known that the major failure mode of the EDG is a concrete coning failure due to a pulling out of the anchor bolts. The use of base isolators instead of anchor bolts can increase the seismic capacity of the EDG without any major problems. This study introduces a seismic risk analysis method and presents sample results about the seismically isolated and conventional EDG system.

• 한국안전학회지
• /
• 제16권3호
• /
• pp.117-124
• /
• 2001

This paper introduces m analysis framework and procedure for the support of the cognitive error analysis of emergency tasks in nuclear poler plants. The framework provides a new perspective in the utilization of influencing factors into error prediction. The framework can be characterized by two features. First, influencing factors that affect the occurrence of human error me classified into three groups, i.e., task characteristic factors(TCF), situation factors(SF), and performance assisting factors(PAF). This classification aims to support error prediction from the viewpoint of assessing the adequacy of PAF under given TCF and SF. Second, the assessment of influencing factors is made by each cognitive function. Through this, influencing factors assessment and error prediction can be made in an integrative way according to each cognitive function. In addition, it helps analysts identify vulnerable cognitive functions and error factors, and obtain specific nor reduction strategies. The proposed framework was applied to the error analysis of the bleed and feed operation of nuclear emergency tasks.