• 에너지공학
• /
• 제23권4호
• /
• pp.95-105
• /
• 2014

CUPID 코드는 기기 스케일(Component scale)의 2상 유동(Two-phase flow) 해석 코드로서 다양한 2상 유동 조건의 실험 자료를 이용하여 검증되어 왔다. 특히, CUPID 코드의 CANDU형 원자로 감속재 탱크 내부 유동 해석능력을 평가하기 위해 1/4 규모 축소 실험장치의 실험결과를 이용하여 검증한 바가 있다. 본 연구에서는 이전 연구를 바탕으로 CUPID 코드를 사용하여 실제 원자로 감속재탱크 내부의 열수력 거동을 해석하였다. 감속재 탱크의 내부 구조는 아주 복잡하기 때문에 다공질 매질 방법을 적용하였으며 탱크 입구노즐 또한 기기 스케일 코드의 취지에 부합하게 아주 단순화하여 모델하였다. 해석결과의 정확성을 결정하는 가장 중요한 요소는 입구노즐의 모델 방법에 있는 것으로 나타났다. 입구노즐을 단순하게 모델하여 입구유량을 경계조건으로 부여하고 발전소 정상운전조건으로 계산한 결과, 부력에 의한 열성층화 현상이 발생하였다. 이는 전혀 타당하지 않은 것으로 입구 유동의 모멘텀을 정확하게 모의하지 않아 발생한 것이 나타났다. 이를 개선하고자 입구 유량과 운동량을 동시에 보존시킬 수 있도록 입구 노즐 면적을 축소하고 속도는 증가시켜서 계산한 결과, 사실적인 내부 유동장을 얻을 수 있었다. 결론적으로 계산 비용효과가 뛰어난 다공질 매질 방법에 입각하여 CUPID 코드를 실규모 감속재 탱크 열유동 해석에 적용할 수 있음을 보였고, 입구노즐의 적절한 모델이 가장 중요한 요소임을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.726-739
• /
• 2003

A multi-dimensioanl model is being increasingly used to predict the thermo-flow field in the gas turbine combustor. This article addresses an integrated survey of modeling of the liquid spray formation and fuel distribution in gas turbine with high-shear nozzle/swirler assembly. The processes of concern include breakup of a liquid jet injected through a hole type orifice into air stream, spray-wall interaction and spray-film interaction, breakup of liquid sheet into ligaments and droplet,5, and secondary droplet breakup. Atomization of liquid through hole nozzle is described using a liquid blobs model and hybrid model of Kelvin-Helmholtz wave and Rayleigh-Taylor wave. The high-speed viscous liquid sheet atomization on the pre-filmer is modeled by a linear stability analysis. Spray-wall interaction model and liquid film model over the wall surface are also considered.

• 해양환경안전학회지
• /
• 제24권7호
• /
• pp.939-944
• /
• 2018

청정소화약제는 지구오존층 보호를 위해 발효된 몬트리올 의정서에 따라 할론 1211 및 할론 1310을 대체할 수 있는 약제를 말한다. 국 내외적으로는 청정소화약의 시스템 표준화와 성능평가가 수행되고 있다. 본 논문은 일반적인 청정소화약제 시스템을 바탕으로 다양한 노즐의 형상에 대한 모델링 및 수치해석을 수행하여 최적의 노즐 형상을 제안하였다. Type A와 B의 2가지 형상에 대한 노즐의 3차원 모델링을 통해 노즐의 분출속도가 개선될 수 있도록 하였다. 2가지 형상의 노즐에 대하여 유동해석을 실시하였으며 노즐의 홀 직경을 다르게 하여 가스속도 및 압력분포를 측정하였다. 측정결과 노즐 홀 수 및 직경에 따라 노즐출구에서 분출속도가 달라지는 것을 확인 할 수 있었으며 노즐 홀 직경에 관계없이 유량은 압력이 증가함에 따라 증가하는 경향을 나타내었다. 실험을 통해 얻어진 결과를 바탕으로 노즐 직경이 5 mm인 경우의 K-factor값이 $101.8l/min{\cdot}bar^{-0.5}$임을 확인하였으며, 최종적으로 노즐 홀 5 mm인 12개의 홀이 2층 구조로 되어 있는 형상의 노즐을 제안하였다.

• 동력기계공학회지
• /
• 제12권3호
• /
• pp.12-18
• /
• 2008

In the present study, the numerical simulation has been performed to investigate K-factor for temperature variation of working fluid in spray nozzle with orifice. The commercial CFD software, Fluent with the proper modeling was applied for analyzing the internal of the spray nozzle. Numerical result for K-factor at $20^{\circ}C$ agrees with the experimental result that it applied n=0.5 within about 7% error. The pressure drop inside nozzle is showed 20% passing swirler, 70% in the region between the outlet of swirler and the orifice and 10% at the outlet of orifice. As the operating pressure is increased, K-factor is decreased by effect of flow resistance at it's inlet before pass swirler. The temperature increase of working fluid reduced the flow rate according to reducing of density, and average 1.23% decrease is showed in the present research.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.547-550
• /
• 2008

A solid rocket motor has quite complex physical condition such exothermal chemical reaction in subsonic area and supersonic ex pansion in a converging-diverging nozzle. To introduce a simulation tool for compressible flow in supersonic range as well as incompressible chemical reaction zone in a whole rocket nozzle is a essential demand. Since the flow vary subsonic to super sonic, the convergence in computation becomes very low and unstable in a whole domain of rocket motor. This paper reports the 2-D Axisymmetric and simple 3-D solid propellant combustion and flow of gases in rocket motor by using a precondi tioning, shear stress turbulence modeling, AUSM(p). To simulate the simplified combustion process, Double base solid propellant is used to calculate reaction of solid propellant.

• 한국분무공학회지
• /
• 제24권2호
• /
• pp.58-65
• /
• 2019

A 3D FEM (Finite Element Method) based Helmholtz solver has been commonly used to characterize fundamental acoustic behavior and investigate dynamic instability features in many combustion systems. In this approach, a geometrical simplification of the target system has been generally made in order to reduce computational time and cost because a real combustor and fuel nozzle have a very complicated flow passage. The feasibility of these simplifications is quantitatively investigated in a small aero gas turbine nozzle in term of acoustic characteristics. It is found that the simplification in a nozzle geometry during the 3D FEM analysis process has no great influence on the acoustic modeling results, while the calculation complexity can be improved for a similar modeling accuracy.

• 한국기계가공학회지
• /
• 제21권6호
• /
• pp.15-21
• /
• 2022

This study considered the internal flow considering the internal shape of the CNG filling nozzle, which is widely distributed in Korea. The CNG filling nozzle is the last part to pass through in the CNG filling process and has a significant influence on the filling efficiency. The mechanism was identified by disassembling the CNG filling nozzle and performing a flow analysis according to the mechanism. Consequently, the energy loss owing to eddy currents in the flow was determined, and modeling was proposed to reduce the energy loss by simplifying the shape and parts.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1841-1850
• /
• 1993

A simplified one-dimensional analysis has been performed to predict the local pressure distributions in Y-Jet twin-fluid atomizers. Fluid compressibility was considered both in the gas(air) and two-phase(mixing) ports. The annular-mist flow model was adopted to analyze the flow in the mixing port. A series of experiments also has been performed; the results show that the air flow rate increases and the liquid flow rate decreases with the increase of the air injection pressure and/or with the decrease of the liquid injection pressure. From the measured injection pressures and flow rates, the appropriate constants for the correlations of the pressure loss coefficients and the rate of drop entrainment were decided. The local pressures inside the nozzle by prediction reasonably agree with those by the experiments.

• 연구논문집
• /
• 통권25호
• /
• pp.55-65
• /
• 1995

Three-dimensional incompressible turbulent flow fields within the passage of the steam turbine nozzle with/without tip clearance have been simulated by solving the Navier-Stokes equations with SIMPLE scheme. The extended k-e model is applied to modeling the Reynolds stresses. Grids in the computational domain are generated by solving the Poisson's equations to improve the smoothness and orthogonality. Flow losses, secondary flow, velocity profiles, and deviation angles are obtained. The computated results without tip clearance show good agreement with the experimental data.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.260-265
• /
• 2008

A numerical scheme for solid propellant rocket has been studied using preconditioning method to research unsteady combustion processes for the double-base propellant with a converging-diverging nozzle. The Navier-Stokes equation is solved by dualtime stepping method with finite volume method. The turbulence model uses a shear stress transport modeling. The species equation follows up the method of Xinping WI, Mridul Kumar and Kenneth K. Kuo. A preconditioned algorithm is applied to solve incompressible regime inside the combustor and compressible flow at nozzle. Mass flux was evaluated using modified advective upwind splitting method. The simulated result the comparison a fully coupled implicit method and a semi implicit method in terms of accuracy and efficiency. This report shows the result of solid rocket propellant combustion.