• 대한기계학회논문집B
• /
• 제20권3호
• /
• pp.979-987
• /
• 1996

A theoretical study for the laminar round jet diffusion flame impinging on the wall was carried out to predict the characteristics and structure of impinging jet flame and heat transfer to the wall. Finite chemistry via Arrhenius equation was adopted as the combustion model. All the transport properties were considered as the variable depending on the temperature and composition. For the parametric study, the distance from nozzle to perpendicular wall and Reynolds number at nozzle exit were chosen as the major parameters. As the results of the present study, the characteristics of flow field and the distributions of temperature, density and each chemical species were obtained. The heat transfer rate from flame to the wall and the effective heating area were calculated to investigate the influence of the major parameters on the heat transfer characteristics.

• 한국연소학회지
• /
• 제6권1호
• /
• pp.36-43
• /
• 2001

The NOx emission characteristics of jet flames fueled with $H_2\;and\;CH_4$ were studied. Experimental and numerical investigations were carried out for various flames with varying equivalence ratio, fuel flow rate and nozzle diameter. The Emission indices of NOx(EINOx) were measured by chemiluminescent method and calculated by numerical model based on detailed chemistry. The results show that EINOx of $CH_4\;and\;H_2$ flames have different trends in terms of equivalence ratio and fuel flow rate but have the same trends in terms of nozzle diameter. These differences can be explained by the following Thermal and Prompt trends in both flames. Thermal EINOx is quite sensitive to the residence time in the high-temperature region weighted by the maximum flame temperature. Prompt EINOx is mainly influenced by flame surface area of each combustion conditions.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.260-265
• /
• 2008

A numerical scheme for solid propellant rocket has been studied using preconditioning method to research unsteady combustion processes for the double-base propellant with a converging-diverging nozzle. The Navier-Stokes equation is solved by dualtime stepping method with finite volume method. The turbulence model uses a shear stress transport modeling. The species equation follows up the method of Xinping WI, Mridul Kumar and Kenneth K. Kuo. A preconditioned algorithm is applied to solve incompressible regime inside the combustor and compressible flow at nozzle. Mass flux was evaluated using modified advective upwind splitting method. The simulated result the comparison a fully coupled implicit method and a semi implicit method in terms of accuracy and efficiency. This report shows the result of solid rocket propellant combustion.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.165-176
• /
• 2015

A numerical analysis was conducted to investigate the inlet buzz and combustion oscillation in an axisymmetric ramjet engine with wedge-type flame holders. The physical model of concern includes the entire engine flow path, extending from the leading edge of the inlet center-body through the exhaust nozzle. The theoretical formulation is based on the Farve-averaged conservation equations of mass, momentum, energy, and species concentration, and accommodates finite-rate chemical kinetics and variable thermo-physical properties. Turbulence closure is achieved using a combined scheme comprising of a low-Reynolds number k-${\varepsilon}$ two-equation model and Sarkar's compressible turbulence model. Detailed flow phenomena such as inlet flow aerodynamics, flame evolution, and acoustic excitation as well as their interactions, are investigated. Mechanisms responsible for driving the inlet buzz are identified and quantified for the engine operating at subcritical conditions.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1639-1644
• /
• 1990

본 연구에서는 경계층 해석 방법의 범위 내에서 복사열전달의 영향을 고려하 는데 있어서 매질의 광학적 두끼ㅔ가 얇다고 가정하여 매질 내부에서의 자체적인 복사 열의 후ㅂ수는 무시하고, 가스의 방사 에너지가 모두 벽으로 전된다고 가정하였으며 복사 전달량은 평균광로(mean beam length)를 고려한 가스방사율을 도입하여 복사전달 량을 계산하였다.

• 한국추진공학회지
• /
• 제14권3호
• /
• pp.9-15
• /
• 2010

과팽창 로켓노즐에서 발생하는 충격파 박리패턴의 천이 유동장을 예측하기 위해 축대칭 수치해석적연구를 수행하였다. 비정상, 압축성 N-S 방정식에 k-$\omega$ SST 난류모델을 적용하여, 유한 체적법으로 계산하였다. 종래의 실험적 연구 결과와 비교하였으며, 계산된 결과와 정성적으로 잘 일치하였다. 본 연구의 결과로부터 RSS에서 FSS로 천이할 때 가장 큰 횡력이 발생하며, 이는 비점성 제트 코어 영역에서 발생하는 Vortex ring의 발달로 기인됨을 예측하였다. 또한 엔진 시동과정과 정지과정에서 발생하는 히스테리시스 현상을 잘 모사하였다.

• 한국해양공학회지
• /
• 제18권5호
• /
• pp.15-21
• /
• 2004

An edge tone is the discrete tone or narrow-band sound produced by an oscillating free shear layer, impinging on a rigid surface. In this paper, we present a 2-D edge tone to predict the frequency characteristics of the discrete oscillations of a jet-edge feedback cycle, using the finite difference lattice Boltzmann method (FDLBM). We use a modified version of the lattice BGK compressible fluid model, adding an additional term and allowing for longer time increments, compared to a conventional FDLBM, and also use a boundary fitted coordinates system. The jet is chosen long enough in order to guarantee the parabolic velocity profile of the jet at the outlet, and the edge consists of a wedge with an angle of ${\alpha}$ = 23. At a stand-off distance, the edge is inserted along the centerline of the jet, and a sinuous instability wave, with real frequency, is assumed to be created in the vicinity of the nozzle and propagates towards the downstream. We have succeeded in capturing very small pressure fluctuations, resulting from periodical oscillations of a jet around the edge. The pressure fluctuations propagate with the speed of sound. Its interaction with the wedge produces an non-rotational feedback field, which, near the nozzle exit, is a periodic transverse flow, producing the singularities at the nozzle lips.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.89-93
• /
• 2008

핀틀 형상과 위치가 고체 추진기관의 추력 성능에 미치는 영향을 공압 시험과 수치해석 기법으로 평가하였다. Fluent 해석 결과, Spalart-Allmaras 모델이 공압 시험에 얻은 노즐벽면 압력을 잘 모사하는 것으로 나타났다. 핀틀로 노즐목 크기를 감소시키면 추력은 증가하였으며, 핀틀 직경이 커질수록 핀틀 팁에 나타나는 재순환 영역의 압력에 의한 추력은 증가하지만 노즐 및 연소실 압력에 의한 추력은 감소하여 총 추력은 핀틀 직경이 작은 것 보다 감소하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.211-214
• /
• 2011

본 연구에서는, step을 적용한 추력 노즐 내부 유동장의 횡력 특성을 조사하기 위하여 수치해석적 연구를 수행하였다. 비정상, 축대칭, 압축성 N-S 방정식을 유한 체적법으로 이산화 하였으며, SST k-${\omega}$ 난류모델을 적용하였다. 엔진 정지과정을 모사하기 위하여, NPR은 100~10로 변화시켜 계산 하였다. 본 연구의 결과로 박리점 및 마하디스크 위치는 구동 압력비에 크게 의존하며, 또한 step의 적용이 횡력 특성에 지대한 영향을 미칠 수 있음을 알았다.

• 한국유체기계학회 논문집
• /
• 제17권6호
• /
• pp.52-58
• /
• 2014

In the present work, design optimization of film-cooling hole array on the pressure side of high pressure turbine nozzle was conducted. There are four rows of fan-shaped film cooling holes on the nozzle pressure side surface and each row has a straight array of holes in the spanwise direction for baseline model. For design optimization, hole distributions in streamwise and spanwise directions for three rows of holes except first row are parameterized as a 2nd-order shape function. Three-dimensional compressible RANS equations are used for flow and thermal analysis around the nozzle surface and optimization technique using Design of Experiment, Kriging surrogate model and Genetic Algorithm is used. The results shows that averaged adiabatic wall temperature at the whole nozzle surface decreases about 2.7% and averaged film cooling effectiveness at the pressure side of nozzle increased about 8.2%.