• 한국추진공학회지
• /
• 제18권4호
• /
• pp.1-8
• /
• 2014

과대팽창이 발생하는 축대칭 초음속 노즐에서 노즐압력비가 충격파 구조와 추력성능에 미치는 영향을 규명하기 위해 지상연소시험평가용 추력기 노즐을 대상으로 수치모사를 수행하였다. k-${\omega}$ SST 난류 모델을 적용한 Reynolds-averaged Navier-Stokes 방정식을 상용코드 FLUENT를 사용하여 해석한 결과, 노즐 압력비가 증가함에 따라 추력성능이 단조적으로 증대되고, 노즐 내부에서 생성된 충격파와 유동박리점이 노즐 출구방향으로 밀려나는 사실을 확인하였다. 또, 노즐내부 충격파와 팽창파 위치의 직접적 영향을 받는 노즐 출구면에서의 유동구조가 추력성능에 미치는 영향도 상세히 조사하였다.

• 한국항공우주학회지
• /
• 제48권11호
• /
• pp.849-859
• /
• 2020

반경험식과 상용 전산해석도구를 이용하여 비행 속도 및 챔버 압력에 따른 유도무기의 기저항력을 예측하였으며, 두 해석 결과는 대체적으로 일치함을 보였다. 노즐에 의한 분사 제트의 과대/과소 팽창에 따라 기저부의 유동 특성과 기저항력의 차이가 관찰되었다. 과대팽창 조건에서는 기저부 상단에 팽창파가 발생되면서 기저부의 압력이 감소하였으며, 외부 자유류의 마하수가 증가함에 따라 팽창파의 강도가 강해지면서 기저부 압력 더욱 감소하였다. 과소 팽창 조건에서는 노즐 후류의 영향으로 기저부 주위에 충격파가 발생하고 이로 인해 기저부 압력이 증가하였으며, 챔버의 압력이 증가할수록 그 영향이 크게 나타났다. 동일 챔버 압력 조건에서는 자유류 마하수가 증가함에 따라 기저부에서 생성되는 충격파가 하류로 이동하면서 기저 압력이 감소하는 특성이 관찰되었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.311-317
• /
• 2005

It has been the most progressive interruption technique to use the ablation gas from the surface of PTFE nozzle driven by arc plasma during switching process in $SF_6$ gas circuit breakers. This advanced interruption technique can reduce the required mechanical energy to compress and blow the gas for extinguishing the arc plasma between the electrodes due to using the ablation effect instead. In order to consider the phenomena during calculation of switching process, it is required to confirm the principles of ablation from PTFE nozzle as well as of arc plasma during switching process. In this study, we have calculated the switching process considered the ablation of PTFE nozzle driven by arc plasma using multidisciplinary simulation technique and compared the results with the data without the ablation effect. More $50\%$ difference of pressure rise inside expansion chamber has been found from the results and it should be indispensable for this type of computational work to consider and include the ablation effect of PTFE nozzle. Further study on turbulence and radiation will be followed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.497-500
• /
• 2011

고체 추진기관의 노즐 소재로 사용하기 위하여 Zirconia로 코팅된 SCM-440과 STS-630 적용 노즐의 열구조 안전성에 관한 시험 평가를 수행하였다. 각 노즐에 플라즈마 스프레이 기법으로 0.15 mm 코팅하였으며, Zirconia 코팅 노즐의 열차폐 효율과 열적 내구성 평가를 수행하였다. 두 소재의 노즐목에서 Zirconia 코팅한 노즐은 코팅하지 않은 노즐 보다 70% 높은 열차폐 효율을 갖는 결과를 나타냈다. SCM-440이 STS-630보다 온도 상승률이 더 높으며, 노즐 확장부에서 더 높은 온도를 가지는 것을 확인하였다. 따라서 플라즈마 기법의 Zirconia 코팅이 초음속 노즐의 열구조 안전성에 유용함을 알 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.613-617
• /
• 2011

한국항공우주연구원은 비행시험용 스크램제트 엔진의 최적 형상을 도출을 목표로 추력 노즐 변화에 따른 스크램제트 엔진의 특성을 파악하고자 여러 가지 형상의 추력 노즐을 설계 및 제작하였다. 성능시험은 호주 University of Queensland의 T4 충격파 터널에서 수행되었으며, 총 8종의 노즐과 2 종의 측벽이 시험되었다. 본 논문에는 스크램제트 엔진의 추력 노즐과 측벽의 설계 및 사양을 정리하였다. 또한 스크램제트 엔진 Baseline의 정압력과 노즐 출구 피토 압력 분포를 계산한 결과 양의 비추력을 얻었음을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.160-160
• /
• 2008

In practical etching process, etch ant is sprayed on the metal-deposited panel through nozzles collectively connected to the manifold and that panel is usually composed of many PCB(printed circuit board)'s. The etching uniformity, the difference between individual PCB's on the same panel, has become one of most important features of etching process. In this paper, the prediction of nozzle trajectory has been performed by the combination of algebraic formula and numerical simulation. With the pre-determined geometrical factors of nozzle distribution, the trajectories of individual nozzles were predicted with the change of process operational factors such as panel speed, nozzle swing frequency and so on. As results, two dimensional distribution of impulsive force of etchant spray which could be considered as a key factor determining the etching performance have been successfully obtained. Though only qualitative prediction of etching uniformity have been predicted by the process developed in this study, the expansion to the quantitative prediction of etching uniformity is expected to be apparent by this study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.664-669
• /
• 2001

The characteristics of dual coaxial jet which composed of inner supersonic nozzle of 26500 in constant expansion rate with 1.91 design Mach number and outer converging one with $40^{\circ}$ converging angle with the variation of outer nozzle stagnation pressures are experimentally investigated in this paper. In which the stagnation pressure for the inner supersonic nozzle is 750kPa thus, the inner jet leaving the nozzle is slightly underexpanded. The plenum pressures of outer nozzle are varied from 200 to 600kPa. Flow visualizations by shadowgraph method, impact pressure and centerline static pressure measurements of dual coaxial jet are presented. The results show that the presence of outer jet affects significantly the structures and pressure distributions of inner jet. And outer jet causes Mach disk which does not appear for the case of single jet stream. As the stagnation pressure of outer jet increases, impact pressure undulation is severe, but the average impact pressure keeps high far downstream.

• 대한기계학회논문집B
• /
• 제26권7호
• /
• pp.951-958
• /
• 2002

Rapid expansion of a moist air or a stream through a supersonic nozzle often leads to non-equilibrium condensation shock wave, causing a considerable energy loss in flow field. Depending on amount of latent heat released due to non-equilibrium condensation, the flow is highly unstable or a periodical oscillation accompanying the condensation shock wave in the nozzle. The unsteadiness of the condensation shock wave is always associated with several kinds of instabilities as well as noise and vibration of flow devices. In the current study, a passive control technique using a porous wall with a plenum cavity underneath is applied for the purpose of alleviation of the condensation shock oscillations in a transonic nozzle. A droplet growth equation is coupled with two-dimensional Navier-Stokes equation system. Computations are carried out using a third-order MUSCL type TVD finite-difference scheme with a second-order fractional time step. An experiment using an indraft wind tunnel is made to validate the present computational results. The results show that the oscillations of the condensation shock wave are completely suppressed by the current passive control method.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.301-308
• /
• 1999

The present study investigates numerically particle laden flow through compressor cascades and a rocket nozzle. Engines are affected by various particles which are suspending in the atmosphere. Especially in the case of aircraft aviating in volcanic, industrial and desert region including many particles, each components of engine system are damaged severely. That damage modes are erosion of compressor blading and rotor path components, partial or total blockage of cooling passage and engine control system degradation. Numerical prediction and experimental data, erosion rates are predicted for two materials - ceramic, soft metal - on compressor blade surface. Aluminum oxide ($Al_2O_3$) Particles included in solid rocket propelant make ablative the rocket motor nozzle and imped the expansion processes of propulsion. By the definition of particle deposition efficiency, characteristics of particles impaction are considered quantitatively Stoke number is defined over the various particle sizes and particle trajectories are treated by Lagrangian approach. Particle stability is considered by definition of Weber number in rocket nozzle and particle breakup and evaporation is simulated in a rocket nozzle.

• 한국분무공학회지
• /
• 제26권4호
• /
• pp.189-196
• /
• 2021

Spray drift of agricultural nozzles has become a big issue because it causes low precision targeting and environmental pollution. In order to reduce the spray drift, study spray characteristics of agricultural nozzles is virtually important. In this study, shadowgraph and Mie-scattering visualization techniques were used to study the macroscopic spray and atomization characteristics of an agricultural nozzle. PDPA was used to measure the atomization characteristics of spray. The injection pressure is set to 1 bar, 3 bar and 5 bar, which covers the working range of the nozzle. For the PDPA experiment, 75 points were measured in an area of 160 mm × 120 mm at 10 mm intervals directly below the nozzle to grasp the overall atomization characteristics of the spray. It was found that the spray width and sheet width showed a linear correlation. As the injection pressure increased, the sheet expansion in the 0-degree direction and the sheet swing in the 90-degree direction jointly promoted the breakup of the sheet. In addition, the area close to the central axis had a large droplet velocity, and since a large droplet velocity promoted atomization of spray, the area close to the central axis had a smaller spray droplet diameter than the left and right regions.