• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.600-603
• /
• 2018

The purpose of this study is to describe the SW Convergence education class applying the Novel Engineering teaching method during the creative experiential activity time. We developed a SW convergence education program for a patriotism class applying Novel Engineering, a new educational method instead of writing and drawing. Through this lesson program, students can improve their problem-solving ability based on their computational thinking and enhance their love spirit about country. Students read a book that tells the story of patriot, writes the historical scene presented in the book through scenarios through Re-enactment, and implements the simulation situation using Lego WeDo 2.0. The results of this study based on the analysis of the data on the questionnaire showed that there is a significant students' change through the SW convergence education program for patriotism class. In the future, we will expand the scope to more various grades and subjects so that we can generalize the effectiveness of SW convergence education applying Novel Engineering.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.1-5
• /
• 2010

In this paper, we directly compare the program efficiency of conventional channel hot electron (CHE) injection methods and a novel hot electron injection methods using substrate forward biases in our silicon-oxide-nitride-oxide-silicon (SONOS) cell. Compared with conventional CHE injection methods, the proposed injection method showed improved program efficiency including faster program operation at lower bias voltages as well as localized trapping features for multi-bit operation with a threshold voltage difference of 1 V at between the forward and reverse read. This program method is expected to be useful and widely applied for future nano-scale multi-bit SONOS memories.

• KIEE International Transactions on Power Engineering
• /
• v.4A no.4
• /
• pp.178-191
• /
• 2004

This paper presents a new approach to HVDC system control for damping subsynchronous oscillation (SSO) involving HVDC converters and turbine generator shaft systems. This requires a novel eigenvalue analysis (NEA) program, derivation of HVDC system modeling considering steady-state conditions and dynamic conditions in the combined AC/DC system, and an appropriate control scheme. The method suggested makes possible the design of a subsynchronous oscillation damping controller (SODC) to provide positive damping torque for the range of torsional modes in combined AC/DC systems. There are three steps involved in the design of a SODC； first the worst torsional mode is determined using the NEA program, next the SODC parameters are designed for the range of that torsional mode, and then finally an off-line simultaneous time domain program such as PSCAD/EMTDC is used to verify the parameters of the SODC. The suggested SODC design method is applied to two AC/DC systems, and its practicality is verified using the PSCAD/EMTDC simulation program.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.3
• /
• pp.140-151
• /
• 2004

This paper presents the HVDC system modelling for analysis of subsynchronous oscillation and the design of the subsynchronous oscillation damping controller in HVDC system with the aid of novel eigenvalue analysis program. The HVDC system models include both the steady-state model for power flow calculation and the dynamic model for constructing the state matrix. The design procedures of the subsynchronous oscillation damping controller (SODC), which is integrated with PI controller at rectifier, consist of three steps:1) to identify the dominant torsional oscillation mode in the AC/DC system;2) to determine the parameters of the SODC for compensating the phase lagging due to the rectifier controller;3) to validate the control parameters and to determine the appropriate gain using a time-domain simulation program. The proposed design method has been tested against two AC/DC systems for validation.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.193-195
• /
• 2004

This paper presents a novel data transmit method using display units of mobile devices. Mobile devices such as personal-digital-assistants (PDAs) and cellular phones have a display unit. The typical display unit is a liquid-crystal-display (LCD) with an back-light. Since the proposed data transmit method uses the LCD or back-light as a data transmitter, it is a kind of sightable light communication. Tn order to transmit the data, the display unit drived by an application program on the platform of mobile devices. In this paper, detailed data transmit scheme, specific data protocol are presented and discussed. Finally, with the experimental results, usefulness of the proposed data transmit method is verified.

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.405-411
• /
• 2010

This paper proposes a novel tracking algorithm considering radiation to improve the power of a photovoltaic (PV) tracking system. The sensor method used in a conventional PV plant is unable to track the sun's exact position when the intensity of solar radiation is low. It also has the problem of malfunctions in the tracking system due to rapid changes in the climate. The program method generates power loss due to unnecessary operation of the tracking system because it is not adapted to various weather conditions. This tracking system does not increase the power above that of a power of tracking system fixed at a specific position due to these problems. To reduce the power loss, this paper proposes a novel control algorithm for a tracking system and proves the validity of the proposed control algorithm through a comparison with the conventional PV tracking method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.300-304
• /
• 2008

A novel characterization method was investigated to estimate the trap generation during the program /erase cycles in nand flash memory cell. Utilizing Fowler-Nordheim tunneling current, floating gate potential and oxide electric field, we established a quantitative model which allows the knowledge of threshold voltage (Vth) as a function of either program or erase operation time. Based on our model, the derived results proved that interface trap density (Nit) term is only included in the program operation equation, while both Nit and oxide trap density (Not) term are included in the erase operation equation. The effectiveness of our model was tested using 50 nm nand flash memory cell with floating gate type. Nit and Not were extracted through the analysis of Program/Erase speed with respect to the endurance cycle. Trap generation and cycle numbers showed the power dependency. Finally, with the measurement of the experiment concerning the variation of cell Vth with respect to program/erase cycles, we obtained the novel quantitative model which shows similar results of relationship between experimental values and extracted ones.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.121-124
• /
• 2006

In the newly developed control method, the current flowing into SPE cell is the only one considerable factor. So, the structure of control circuit becomes simple and the manufacturing cost of the control device decreases. In conventional power comparison MPPT control method however, a voltage and current coming out from PV cell should be feedbacked to chase maximum power point at every moment. Then, the structure of control circuit becomes so complex and the risk of control failure is much higher than the novel MPPT control method. Therefore, PV generation system by a novel MPPT control method is especially operated much more safely in case of a huge system, because the voltage coming out from PV-cell is not needed to be feedbacked. In this paper, the PV-SPR system was actually manufactured based on the simulation model of PSCAD/EMTDC program and the results tested were shown. Authors are sure that it is the most useful method to maximize power from PV to SPE with only a feedback of SPE input current.

• Archives of Pharmacal Research
• /
• v.24 no.6
• /
• pp.473-484
• /
• 2001

There is clearly a need for novel breast cancer chemopreventive agents with enhanced potency and specificity with tittle or no side effects. To this end, several new chemical moieties have been synthesized or isolated from natural sources. In this reviewal we have described some agents currently in use or under development for treatment or prevention of breast cancer, as well as our own strategies for the discovery of natural product modulators of estrogen biosynthesis and function. In particulars bioassay-guided fractionation of active plant extracts is a unique method for identifying agents with novel mechanisms of action, some of which should be useful for prevention of human cancer. Further, with the advent of combinatorial chemistry and high throughput screening, even greater progress may now be expected with natural product leads.

• Educational Technology International
• /
• v.6 no.2
• /
• pp.69-85
• /
• 2005

The purpose of the article is to address a new instructional approach to a complex engineering course. We design a novel instructional method that combines mobile technology, simulation program, collaborative teamwork, problem-solving process, and a variety of evaluation techniques. We suggested five instructional principles that might be required to change the fundamental educational process by which learning is done. The proposed instructional method is expected to aspire for new perspectives on complex learning environment. Nevertheless we solely began by the research on the development of students' complex problem-solving performance in a complex engineering course, the new instructional method in the article can promote the adoption of new instructional methods and strategies across different knowledge domains. In addition, the instructional method can provide a valuable bridge to acquisition and transfer of problem solving, motivation, and meaning learning.