• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.600-603
• /
• 2018

본 연구에서는 Novel Engineering 교수학습단계를 기반으로 창의적 체험활동 시간에 이루어지는 SW 융합형 호국보훈 수업 방안에 대해 기술하고자 한다. 글짓기, 그림 그리기 등 천편일률적으로 이루어지는 호국보훈 수업에 새로운 교육 방법인 Novel Engineering을 적용한 SW 융합형 수업을 개발함으로써 학생들의 컴퓨팅 사고력을 바탕으로 하는 문제해결력 신장은 물론 나라 사랑 정신을 함양할 수 있다. 순국열사의 이야기를 담은 도서를 읽고, 책 속에 제시된 역사적 장면을 추체험활동(Re-enactment)을 통해 시나리오로 작성한 후 이를 Lego WeDo 2.0을 활용해 시뮬레이션 상황을 구현한다. 이러한 SW 융합형 호국보훈 수업을 통해 학생들의 변화도를 창의적 사고력 검사지와 설문지를 통해 분석한 결과 유의미한 변화가 있음을 알 수 있었다. 향후에는 보다 다양한 학년과 교과로 그 범위를 확대하여 Novel Engineering을 적용한 SW 융합형 수업의 효과성을 일반화할 수 있도록 해야겠다.

• 대한전자공학회논문지SD
• /
• 제47권1호
• /
• pp.1-5
• /
• 2010

본 논문에서는, SONOS 소자에서의 일반적인 CHE(Channel Hot Electron) 주입 방법과 기판 순바이어스를 이용한 새로운 전자 주입 방법의 프로그램 효율성에 대해 직접 비교하였다. 기존의 CHE 주입 방법과 비교해서, 새로운 전자 주입 방법은 낮은 구동전압, 빠른 프로그램 속도 등의 특성을 포함하여 높은 프로그램효율을 보였으며, 또한 드레인 영역에서의 순방향 읽기와 역방향 읽기의 문턱전압 차이가 1 V 가량 발생한다는 점에서 국소 주입 동작이 가능함을 확인하였다. 이렇게 제안된 전자주입 방법은 차세대 나노 크기 멀티-비트 SONOS 소자의 동작에 매우 유용하게 사용될 것으로 기대된다.

• KIEE International Transactions on Power Engineering
• /
• 제4A권4호
• /
• pp.178-191
• /
• 2004

This paper presents a new approach to HVDC system control for damping subsynchronous oscillation (SSO) involving HVDC converters and turbine generator shaft systems. This requires a novel eigenvalue analysis (NEA) program, derivation of HVDC system modeling considering steady-state conditions and dynamic conditions in the combined AC/DC system, and an appropriate control scheme. The method suggested makes possible the design of a subsynchronous oscillation damping controller (SODC) to provide positive damping torque for the range of torsional modes in combined AC/DC systems. There are three steps involved in the design of a SODC； first the worst torsional mode is determined using the NEA program, next the SODC parameters are designed for the range of that torsional mode, and then finally an off-line simultaneous time domain program such as PSCAD/EMTDC is used to verify the parameters of the SODC. The suggested SODC design method is applied to two AC/DC systems, and its practicality is verified using the PSCAD/EMTDC simulation program.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권3호
• /
• pp.140-151
• /
• 2004

This paper presents the HVDC system modelling for analysis of subsynchronous oscillation and the design of the subsynchronous oscillation damping controller in HVDC system with the aid of novel eigenvalue analysis program. The HVDC system models include both the steady-state model for power flow calculation and the dynamic model for constructing the state matrix. The design procedures of the subsynchronous oscillation damping controller (SODC), which is integrated with PI controller at rectifier, consist of three steps:1) to identify the dominant torsional oscillation mode in the AC/DC system;2) to determine the parameters of the SODC for compensating the phase lagging due to the rectifier controller;3) to validate the control parameters and to determine the appropriate gain using a time-domain simulation program. The proposed design method has been tested against two AC/DC systems for validation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.193-195
• /
• 2004

This paper presents a novel data transmit method using display units of mobile devices. Mobile devices such as personal-digital-assistants (PDAs) and cellular phones have a display unit. The typical display unit is a liquid-crystal-display (LCD) with an back-light. Since the proposed data transmit method uses the LCD or back-light as a data transmitter, it is a kind of sightable light communication. Tn order to transmit the data, the display unit drived by an application program on the platform of mobile devices. In this paper, detailed data transmit scheme, specific data protocol are presented and discussed. Finally, with the experimental results, usefulness of the proposed data transmit method is verified.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.405-411
• /
• 2010

This paper proposes a novel tracking algorithm considering radiation to improve the power of a photovoltaic (PV) tracking system. The sensor method used in a conventional PV plant is unable to track the sun's exact position when the intensity of solar radiation is low. It also has the problem of malfunctions in the tracking system due to rapid changes in the climate. The program method generates power loss due to unnecessary operation of the tracking system because it is not adapted to various weather conditions. This tracking system does not increase the power above that of a power of tracking system fixed at a specific position due to these problems. To reduce the power loss, this paper proposes a novel control algorithm for a tracking system and proves the validity of the proposed control algorithm through a comparison with the conventional PV tracking method.

• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.300-304
• /
• 2008

A novel characterization method was investigated to estimate the trap generation during the program /erase cycles in nand flash memory cell. Utilizing Fowler-Nordheim tunneling current, floating gate potential and oxide electric field, we established a quantitative model which allows the knowledge of threshold voltage (Vth) as a function of either program or erase operation time. Based on our model, the derived results proved that interface trap density (Nit) term is only included in the program operation equation, while both Nit and oxide trap density (Not) term are included in the erase operation equation. The effectiveness of our model was tested using 50 nm nand flash memory cell with floating gate type. Nit and Not were extracted through the analysis of Program/Erase speed with respect to the endurance cycle. Trap generation and cycle numbers showed the power dependency. Finally, with the measurement of the experiment concerning the variation of cell Vth with respect to program/erase cycles, we obtained the novel quantitative model which shows similar results of relationship between experimental values and extracted ones.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.121-124
• /
• 2006

In the newly developed control method, the current flowing into SPE cell is the only one considerable factor. So, the structure of control circuit becomes simple and the manufacturing cost of the control device decreases. In conventional power comparison MPPT control method however, a voltage and current coming out from PV cell should be feedbacked to chase maximum power point at every moment. Then, the structure of control circuit becomes so complex and the risk of control failure is much higher than the novel MPPT control method. Therefore, PV generation system by a novel MPPT control method is especially operated much more safely in case of a huge system, because the voltage coming out from PV-cell is not needed to be feedbacked. In this paper, the PV-SPR system was actually manufactured based on the simulation model of PSCAD/EMTDC program and the results tested were shown. Authors are sure that it is the most useful method to maximize power from PV to SPE with only a feedback of SPE input current.

• Archives of Pharmacal Research
• /
• 제24권6호
• /
• pp.473-484
• /
• 2001

There is clearly a need for novel breast cancer chemopreventive agents with enhanced potency and specificity with tittle or no side effects. To this end, several new chemical moieties have been synthesized or isolated from natural sources. In this reviewal we have described some agents currently in use or under development for treatment or prevention of breast cancer, as well as our own strategies for the discovery of natural product modulators of estrogen biosynthesis and function. In particulars bioassay-guided fractionation of active plant extracts is a unique method for identifying agents with novel mechanisms of action, some of which should be useful for prevention of human cancer. Further, with the advent of combinatorial chemistry and high throughput screening, even greater progress may now be expected with natural product leads.

• Educational Technology International
• /
• 제6권2호
• /
• pp.69-85
• /
• 2005

The purpose of the article is to address a new instructional approach to a complex engineering course. We design a novel instructional method that combines mobile technology, simulation program, collaborative teamwork, problem-solving process, and a variety of evaluation techniques. We suggested five instructional principles that might be required to change the fundamental educational process by which learning is done. The proposed instructional method is expected to aspire for new perspectives on complex learning environment. Nevertheless we solely began by the research on the development of students' complex problem-solving performance in a complex engineering course, the new instructional method in the article can promote the adoption of new instructional methods and strategies across different knowledge domains. In addition, the instructional method can provide a valuable bridge to acquisition and transfer of problem solving, motivation, and meaning learning.