• The KIPS Transactions:PartC
• /
• v.11C no.2
• /
• pp.219-228
• /
• 2004

Wireless LAN(wireless Local Area Network) is constructed network environment by radio in indoors or outdoors environment and that to use electric wave or light instead of wire to client such as PC(Personal Computer), notebook, PDA in hub(Hub) in technological side. Now, among IEEE 802.11 WG(Working Group), there is TGf(Task Group F) that develop standard protocol between AP's(Access Point). In this group, proposed IAPP(Inter Access Point Protocol) to secure interoperability between AP producing in different manufacturer, this offers seamless connectivity between STA by sharing Security Context information or Layer 2 forwarding information between AP without passing through re-authentication process when STAs(Station) move by protocol to secure mobility between AP that differ in equal serve network. In this paper, I wish to suggest method that change avenue of communication of message to block information leakage that can occur at security message or WEP Key transmission between above AP, and uses public key to offer wireless area security little more.

• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.32-36
• /
• 2006

Magnesium has been used as light and functional material, and its demand is increasing as a material for automobile engine and for mobile phone or notebook PC case. Fused salt electrolysis and thermal reduction are regarded as main methods for the extraction of magnesium, and choice for the method is firstly according to raw material. In this study, magnesium metal is obtained by an electrolysis of magnesium chloride. Two types of fused salt mixtures were used as electrolyte and electrolyzed at 7V with a graphite anode having the same depth, and their results were compared with each other. A mixed salt of $KCl/NaCl/MgCl_2$ was the more effective than $KCl/NaCl/CaCl_2/CaF_2/MgCl_2$ in current efficiency through the experiments at $760^{\circ}C$. Purity of the prepared magnesium metal was above 98%. Some basic data for scale-up of the magnesium electrolysis equipment, which would be necessary for a commercialization, could be obtained.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1365-1374
• /
• 2010

The maritime traffic is more complex these days. It is more hard for the small fishing ships to navigated in shores. The requirements for the navigate information system to protect the sea environments and support the small fishing ships are more increased. However, the Inmarsat communication system is too burden to the fishermen with the expensive terminal and call fees. We propose the wireless digital fishing information network which use the existing MF/HF SSB communications system by connecting I-PHONE, PDA, NetBook, Notebook, PC, etc with the PSK31 method and AIS(Automatic Identification System) on the MF/HF radio Band.

• Journal of Korea Multimedia Society
• /
• v.5 no.2
• /
• pp.176-190
• /
• 2002

According as vehicles increases, system such as Advanced Drivers Assistance System(ADAS ) to inform forward situation to driver is required. In this paper, we proposes method to detect forward vehicles and lane from sequential color images by basis process to inform forward situation to driver. We detect a front vehicle using that shadow area exists on part under vehicles and that road area occupies many parts even if road traffic is confused. We detect lane information using that lane part is white order by reverse characteristic of shadow area. This method shows good result in case road is confused or there is direction indication to road. HSV color space is selected for color modeling. This method uses saturation component and value component in HSV color model to detect vehicles and lane. It uses statistics features of HSV component and position to know whether detected vehicles area is vehicles such as vehicles previous frame. To verify the effects of the proposed method, we capture the road images with notebook and CCD camera for PC and Present the results such as processing time, accuracy and vehicles detection against the images.

• Agricultural and Biosystems Engineering
• /
• v.6 no.2
• /
• pp.47-53
• /
• 2005

AMachine vision is a promising tool for the autonomous guidance of farm machinery. Conventional CCD camera for the machine vision needs a desktop PC to install a frame grabber, however, a web camera is ready to use when plugged in the USB port. A web camera with a notebook PC can replace existing camera system. Autonomous steering control system of this research was intended to be used for combine harvester. If the web camera can recognize cut/uncut edge of crop, which will be the reference for steering control, then the position of the machine can be determined in terms of lateral offset and heading angle. In this research, a white line was used as a cut/uncut edge of crop for steering control. Image processing algorithm including capturing image in the web camera was developed to determine the desired travel path. An experimental vehicle was constructed to evaluate the system performance. Since the vehicle adopted differential drive steering mechanism, it is steered by the difference of rotation speed between left and right wheels. According to the position of vehicle, the steering algorithm was developed as well. Evaluation tests showed that the experimental vehicle could travel within an RMS error of 0.8cm along the desired path at the ground speed of $9\sim41cm/s$. Even when the vehicle started with initial offsets or tilted heading angle, it could move quickly to track the desired path after traveling $1.52\sim3.5m$. For turning section, i.e., the curved path with curvature of 3 m, the vehicle completed its turning securely.

• The KIPS Transactions:PartA
• /
• v.15A no.2
• /
• pp.101-110
• /
• 2008

Ubiquitous computing has extended the computer system into the whole physical space and has ushered the emergence of more dynamic distributed systems. This environment require unique QoS parameters for various devices, resources and user requirements. In this paper, we propose a new hybrid QoS management model which defines a static-dynamic QoS parameter that is more appropriate to the ubiquitous computing environment. This model consists of the QoS Control Management Module(QoS CMM) in the client side and the Resource QoS Management Module (RQoS MM) in the server side. The RQoS MM deals with the static QoS parameters and the whole QoS control of the distributed control(QoS CMM) in order to minimize server load in cases of multiple communication. Finally, we present the experimental result of our location based application using a graphical user interface that shows the multimedia service execution of selected client device types such as desktop PC, notebook and PDA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1113-1118
• /
• 2013

Real-time video communication technology of hybrid Web-based using JavaScript and HTML5 today is on the rise. Therefore, in this paper, we have studied the real-time videoo communication technology using a Web browser that supports HTML5. It has been designed and implemented a system based on HTML5 and JavaScript, allowing for video communication of real-time, such as you would using the HTTP/WebSockets and RTC API through the Web servers in the Web browser between different each other, utilizing a Web browser was. It is available in a usable terminal equipment of a Web browser PC or notebook, smart pad, such as a smart phone, which is available without installation, such as a plug-in register or another. In all environments the network is connected, it is available in all terminals use the Web browser is enabled, which will be utilized in the field of video communication in a restricted environment.

• Communications of Mathematical Education
• /
• v.23 no.3
• /
• pp.863-885
• /
• 2009

In the era of wireless internet, we are apt to use a mobile phone for learning mathematics, besides the pc computer and the notebook computer. This study was to investigate the effect of M-learning when students were given a wireless mobile phone in terms of their perspectives towards the use of a mobile phone, achievement and attitudes towards mathematics. They were the 3th grader in a high school, who were expected to take Aptitude Test for the entrance of the university level. The most students who took an ubiquitous environment of M-learning showed it as a benefit for learning mathematics and did not spend time at other activities such as listening to music, sending text-message, playing games, etc, but at the M-learning activities. The students who engaged in the M-learning activities were improved a significantly higher score at Aptitude Test than the students who took the make-up courses in the school and also did a significantly higher disposition towards mathematics which was caused by curiosity among 7 components of the mathematical disposition.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.829-834
• /
• 2011

This paper introduces a new system which measures abrasion quantity of cylinder liners of large-scale marine diesel engines. The proposed system consists of three parts; measurement part where an LVDT, a temperature sensor, a camera and LED for lighting control are installed, monitoring part which accomplishes measurement command transmission and monitoring based on PC or notebook, and master control part which controls the measurement part and transfers measurement data to the monitoring part. The accuracy of the developed system is compared with that of an internal micrometer with 1/100 mm accuracy.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.880-883
• /
• 2006

The reduction of tool vibration has been a serious issue for both employers and workers because of the risks of vibration transmitted to the workers. In this study a hand-arm vibration measurement and evaluation system was developed based on ISO 5349:2001 and used for analyzing relation of vibration level and components of tools. This system consists of a notebook PC installed a LabVIEW program and the data acquisition system including two 3-axial accelerometers and a NI-DAQ card. Vibration measurement tests were conducted for eight angle grinders and four impact wrenches where 3 subjects were used for each of the tools. The relation between different components of each tool and its vibration total value made it possible to set-up a guideline of tool design. In the past engineers developed tools by using their experience and intuition, but by using this system it became possible to design tool components so as to minimize the risks of hand-transmitted vibration.