• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.77-82
• /
• 2000

Parametric study fur the cooling characteristic investigation of a notebook PC mounted with heat spreader has been numerically performed. Two oases of air-blowing and air-exhaust at inlet were tested. The cooling effect on Parameters such an, velocities of air-blowing and air-exhaust, materials of heat spreader, and CPU powers were simulated for two cases. Cooling performance in the case of air-blowing was better than the case of air-exhaust.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.6
• /
• pp.799-803
• /
• 2001

Miniature heat pipe(MHP) with woven-wired wick was used to cool the CPU of a notebook PC. The pipe with circular cross-section was pressed and bent for packaging the MHP into a notebook PC with very limited compact packaging space. A cross-sectional area of the pipe is reduced about 30% as the MHP with 4mm diameter is pressed to 2mm thickness. In the present study a performance test has been performed in order to review varying of operating performance according to pressed thickness variation and heat dissipation capacity of MHP cooling module that is packaged on a notebook PC. New wick type was considered for overcoming low heat transfer limit when MHP is pressed to thin-plate. The limiting thickness or pressing is shown to be within the range of 2mm∼2.5mm through the performance test with varying the pressing thickness. When the wall thickness of 0.4mm is reduced to 0.25mm for minimizing conductive thermal resistance through the wall of heat pipe, heat transfer limit and thermal resistance of MHP were improved about 10%. In the meantime, it is shown that the thermal resistance and heat transfer limit for the MHP with central wick type are higher than those of MHP with existing wick types. The results of performance test for MHP cooling modules with woven-wired wick to cool a notebook PC shows the stability as cooling system since T(sub)j(Temperature of Processor Junction) satisfy a demand condition of 0∼100$\^{C}$ under 11.5W of CPU heat.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.6
• /
• pp.766-775
• /
• 2001

Parametric study to investigate the cooling performance of a notebook PC mounted with heat spreader has been numerically performed. Two cases of air-blowing and air-exhaust at inlet were tested. The cooling effect on parameters such as, inlet velocities in the cases of air-blowing and air-exhaust, materials of heat spreader, and CPU powers were simulated for two cases. Cooling performance in the case of air-blowing was better than the case of air-exhaust.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.11
• /
• pp.1047-1054
• /
• 2003

Smart battery pack (SBP) for notebook PCs was developed using a cylindrical-type lithium ion battery. Batteries were connected with three serial and two parallel, the nominal capacity and the maximum load of SBP was 4,000mAh and 4.0A, respectively. The SBP was composed of a protection IC, by which safety of lithium ion batteries is maintained against overcharge, overdischarge and overcurrent, and a smart IC, which calculates the remaining capacity and the remaining run time. In matching test on notebook PC using Battery Mark 4.0, real and smart data of END voltage coincided nearly and LB and LLB signal worked norma]]y. And there were errors of less than 1% between the real and the smart data on the residual capacity in the charge and discharge test.

• Journal of Korean Electronics
• /
• v.11 no.7
• /
• pp.40-48
• /
• 1991

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.365-368
• /
• 2008

일반적으로 6 시그마 적용사례는 제조분야 중심으로 연구 발표되는 경우가 많고, 판매나 마케팅 분야의 적용사례는 찾기 힘들실정이다. 본 논문에서는 S전자의 전문상가에서 판매되는 노트북의 판매비중을 높이기 위해 6 시그마를 적용하여 노트북의 판매비중을 높이기 위해 프로젝트를 진행하였다.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.11
• /
• pp.97-105
• /
• 1996

This paper is a study on the implementation of speech recognition mobile robot to which the interactive speech recognition techniques is applied. The speech command uttered the sentential connected word and is asserted through the wireless mic system. This speech signal transferred LPC-cepstrum and shorttime energy which are computed from the received signal on the DSP board to notebook PC. In notebook PC, DP matching technique is used for recognizer and the recognition results are transferred to the motor control unit which output pulse signals corresponding to the recognized command and drive the stepping motor. Grammar network applied to reduce the recognition speed of the recogniger, so that real time recognition is realized. The misrecognized command is revised by interface revision through the conversation with mobile robot. Therefore, user can move the mobile robot to the direction which user wants.

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.905-910
• /
• 2006

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.49-57
• /
• 2012

Recently as the user experience's importance has been emphasized, there has been many tries of various research methodology in order to understand the user. Specially, as the political investigation method's user understanding method based on the statistical analysis so far has encountered a limit, there has been a continuous tendency to try to introduce a humanitarian or cultural anthropological methodology. As part of this effort, there has been many tries of various approach methods of the Ethnography which is the cultural anthropological typical research methodology, but among those the Diary Study Method is mentioned as one of the effective methodologies. Therefore this thesis applies the Diary Study Method to the notebook PC bundle SW's attitude research and tries a deep rooted research about the user attitude. Also centered to the project of understanding the notebook PC bundle SW's user receptivity. it shows a specific example of the Diary Study applied to the user understanding. Through this process, we will examine the summary about the Ethnography research method, and will discuss an effective research methodology by through the process of analyzing and deducting the user inclination by applying and designing the Diary Study to the project. That is to say, it was progressed by actually applying the research methodology through a specific case, with the purpose of breaking away from the textbook discussion and progress with an application aspect discussion. Through the current research, we will verify an active user-inclined process about the user's notebook PC SW, and it is expected to be useful in establishing a SW UX strategy and distribution related to the bundle software.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.3
• /
• pp.227-234
• /
• 2000

An experimental study was performed for understanding the limiting power and heat transfer characteristics of an MHP having the diameter of 3 or 4 mm which could be applied to cooling of miniature electronic equipment such as the notebook PC CPU etc. The experimental parameters which are inclination, structure of the wick, the length of the condenser and the total heat pipe were considered. The MHP with a woven-wired wick has the advantages of the improvement in capillary limit, the effective attachment tightly toward wall and the convenience in construction of wick. Cooling performance of the present MHP was compared with that of MHP with grooved, fine fiber and sintered type wick which were applied by existing enterprises. With respect to the inclination of$ -5^{\circ}$ , an MHP having the diameter of 3 or 4 mm shows the limiting power of 6~14 W. Therefore, it is expected that the MHP of the present study has sufficient applicability of cooling of notebook PC of which the amount of heat generated is about 12 W.