• Journal of Power System Engineering
• /
• v.7 no.3
• /
• pp.29-34
• /
• 2003

Genetic algorithm is a optimization technique based on the mechanics of natural selection and natural genetics. Global optimum solution can be obtained efficiently by operations of reproduction, crossover and mutation in genetic algorithm. The authors developed a computer program which can optimize marine propulsion shafting by using binary-coded genetic algorithm and modal analysis method. In order to confirm the effectiveness of the developed computer program, we apply the program to a optimum design problem which is to obtain optimum diameters of intermediate shaft and propeller shaft in marine propulsion shafting. Objective function is to minimize total mass of shafts and constraints are that torsional vibration stresses of shafts in marine propulsion shafting can not exceed the permissible torsional vibration stresses of the ship classification society. The computational results by the program were compared with those of conventional design technique.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.95-105
• /
• 1988

This paper describes the development of a reliability-based optimum design technique for such three dimensional tubular frames as off shore structures. The objective function is formulated for the structural weight. Constraints that probability of failure for the critical sections does not exceed the allowable probability of failure are set up. In the evaluation of the probability of failure, fatigue as well as buckling and plasticity failure are taken into account and the mean-value first-order second-moment method(MVFOSM) is applied for its calculation. In order to reduce the computing time required for the repeated structural analysis in the optimization process, reanalysis method is also applied. Application to two and three dimensional simple frame structures is performed. The influence of material properties, external forces, allowable failure probabilities and interaction between external forces on the optimum design is investigated.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.1-7
• /
• 2018

In this paper, we propose soft dead pixels detection method by analysing different response at hot and cold images. Abnormal pixels are able to effect detecting a small target. It also makes confusing real target or not cause of changing target size. Almost exist abnormal pixels after image signal processing even if dead pixels are removed by dead pixel compensation are called soft dead pixels. They are showed defect in final image. So removing or compensating dead pixels are very important for detecting object. The key idea of this proposed method, detecting dead pixels, is that most of soft deads have different response characteristics between hot image and cold image. General infrared cameras do NUC to remove FPN. Working 2-reference NUC must be needed getting data, hot & cold images. The way which is proposed dead pixel detection is that we compare response, NUC gain, at each pixel about two different temperature images and find out dead pixels if the pixels exceed threshold about average gain of around pixels.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.525-528
• /
• 1999

Structural walls have been favored for the design of reinforced concrete buildings in seismic zone areas because they provide an efficient bracing system and offer great potential for lateral load resistance and drift control. Loads on structures due to earthquakes are not unlikely to reach, if not exceed, the design load levels. Hence, structural damage to walls is inevitable, and it is necessary to repair this damaged walls. Yet, information on repair method and data related to the strength and deformation characteristics of repaired walls is limited. In this study, specimens which have their aspect ratios of about 1 to 3 will be repaired. For the repairing the damaged walls, new concrete and new reinforcing bar are replaced with cracked concrete and the buckled reinforcing bar, respectively. The objective of this study is to evaluate the performance of the repaired structural walls in the capacity of strength, stiffness, and maximum deformation comparing with the undamaged walls.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.3
• /
• pp.149-155
• /
• 2022

The view of not fully denying the application of accomplice regulations to non-punishable opponents has fallen into a formal and logical circular argument that only provides formal grounds for non-punishment and has failed to provide practical grounds. In addition, it can be said that it has a criminal policy problem contrary to the legal sentiment of the general public by not punishing the active government travel activities of non-punishable accomplices. Therefore, in order to solve this problem, it is necessary to respect the legislator's intention that general non-punishment accomplices can be punished if they exceed the 'minimum government travel commission'. Therefore, if an unpunishable accomplice acts at least within the act required to realize the constituent requirements, the application of the accomplice regulations shall be excluded, and the accomplice regulations shall be applied only if they exceed that extent. In addition, if the indispensable counterparty is a protected person or has no responsibility (possibility of expectation), it can be said that it has provided a practical basis for the inability to punish, so it can be understood as impossible to punish. This interpretation method is thought to be able to present concrete validity in marginal cases where the counterparty is more responsible by substantially presenting the basis for an unpunishable accomplice.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2003

There are lots of waterborne diseases which are caused by pathogenic microorganisms disseminated in contaminated environment. The purpose of this study is to investigate the status of water qualify and in order to investigate the sanitary condition of water purifier in northern part of Gyeonggi-do. We analyzed pathogenic microorganisms and 44 items of drinking water criteria from April to July in 2002. The results were as follows. 1. In 774 samples of water purifier, Pathogenic bacteria(salmonella, E coli O-157, O-26, O-111, shigella, pseudomonas etc.) were not isolated and total coliforms not detected. 2. About 76.5% of the water with purifier are found to be appropriated to the drinking water quality criteria. but 182 samples(23.5%) were without limits of drinking water criteria. 3. In the microbiological examination, 774 samples of purified water showed that 169 samples(21.9%) exceed the range of recommended limits(100 $CFU/m{\ell}$) to the total viable bacterial counts by pour plate method.

• Journal of Korean Society for Quality Management
• /
• v.26 no.4
• /
• pp.250-264
• /
• 1998

The purpose of the thesis is to develop simulation program for forecasting of optical connector. So we can achieve the time and the money saving for making the optical connector. Optical performance (insertion loss) of optical connector mainly relies on 3 misalignment factors-ferrule factor due to mis-manufacture from design, auto-centering effect that is fiber behavior phenomena between hole and fiber, fiber misalignment factor. Simulation use experimental data with auto-centering effect and fiber factor and use pseudo data with ferrule through random number generation because it is developing stage. In this study we a, pp.y kernel density estimation method with experimental data in order to know whether it belong to or not specific parametric distribution family. And we simulate to forecast insertion loss of optical multifiber connector under specific design model using nonparametric bootstrap resampling data and parametric pseudo samples from uniform distribution. We obtain the tolerance specifications of misalignment factors satisfying not exceed in maximum 1.0dB and choose optimal hole diameter.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.591-596
• /
• 1999

In this paper, we present a joint quality control system to be able to accurately control the relative picture quality among the video programs in terms of PSNR. The joint quality control system allows variable bit rate (VBR) for each video program to maintain the pre-determined relative picture quality among the aggregated video programs while keeping a constant sum of the bit rates for all programs to be transmitted over a single constant bit rate (CBR) channel. This is achieved by simultaneous controlling the video encoders to generate VBR video streams at the central controller. Furthermore we also suggest buffer regulation method based on the analysis of the constraints imposed by sender/receiver buffer sizes and total transmission rate. Through various simulation results, it is found that our quality control systems guarantee that the video buffers do not overflow and underflow and the quality control errors do not exceed 0.1 ㏈.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4A
• /
• pp.489-495
• /
• 2000

In this paper we propose an approximate method to estimate the cell loss probability(CLP) due to buffer overflow in ATM networks. The main idea is to relate the buffer capacity with the CLP target in explicit formula by using the approximate upper bound for the tail distribution of a queue. The significance of the proposition lies in the fact that we can obtain the expected CLP by using only the source traffic data represented by mean rate and its variance. To that purpose we consider the problem of estimating the cell loss measures form the statistical viewpoint such that the probability of cell loss due to buffer overflow does not exceed a target value. In obtaining the exact solution we use a typical matrix analytic method for GI/D/1B queue where B is the queue size. Finally, in order to investigate the accuracy of the result, we present both the approximate and exact results of the numerical computation and give some discussion.

• YAKHAK HOEJI
• /
• v.33 no.1
• /
• pp.64-71
• /
• 1989

Since time-dependent inactivation of MAO was found to be complete in a few minutes when high concentration ratios of tranylcypromine to MAO were used, a method to obtain kinetic parameters was sought suitable to the conditions in which concentrations of tranylcypromine analogs did not exceed that of MAO. For the purpose, kinetic equations were derived and the method applied to the kinetic studies of tranylcypromine enantiomers. It was found that (E)-(+)-2-phenylcyclopropylamine inhibited MAO by the mechanism following bimolecular reaction scheme with $\tilde{K}_i$ of $2.0\;{\times}\;10^6M^{-1}min^{-1}$. Whereas, MAO-inhibitory pattern of the (-)-enantiomer was to be interpreted by suicide inhibition scheme and measured $k_{in}\;and\;\tilde{K}'$ were $0.457\;min^{-1}\;and\;$5.4{\mu}M$, respectively.