• 제목/요약/키워드: Nose curve

검색결과 32건 처리시간 0.027초

선로정수 연속 조류계산을 이용한 가혹한 상정고장에 있어서 취약지역 도출방안에 대한 연구 (A Study on the Method of the Vulnerable Area Investigation In Severe Contingencies Using Branch Parameter Continuation Power Flow)

  • 서상수;이병준;김태옥;김태균;추진부;이정호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 A
    • /
    • pp.113-116
    • /
    • 2004
  • Many methods to examine the vulnerable areal for the contingencies in the power system. The most widely used index for the vulnerable area investigation has been the reactive power margin or sensitivity analysis. But we can get the results of these analyses if only the results of load flow are convergent in severe contingencies, otherwise these methods are not adoptable. We can present a good index for overcoming severe contingencies, if we can get the vulnerable areas by bus sensitivity in severe contingencies, though the power flow equation is unsolvable. This paper simulates unsolvable severe contingencies by using branch parameter continuation power flow. We can compute the vulnerable areas in unsolvable severe contingencies by normal vector at a nose point of a $\nu-V$ curve. Presented method is checked the input reactive power of the vulnerable areas in KEPCO system.

  • PDF

圓錐팁 Ball End Mill 의 3次元 曲面切削力系에 관한 硏究 (A Study on Free Surface Cutting Force System of Conical Tipped Circular Cutting Edge Ball End Mill)

  • 박천향;맹희구
    • 대한기계학회논문집
    • /
    • 제9권4호
    • /
    • pp.440-451
    • /
    • 1985
  • 본 논문에서는 곡면절삭력계의 해석을 통하여 절삭성과 내마멸성이 우수한 공 구기하형상과 곡면절삭과정에서 절삭조건에 따라 변화하는 가공정밀도 및 안정성을 규 명하고자 한다.

Dynamic Electrochemical Impedance Spectroscopy를 이용한 스테인리스 강의 계면 저항 분석 (In-depth Investigation on Interfacial Resistance of Stainless Steel by Using Dynamic Electrochemical Impedance Spectroscopy)

  • 허정호;이용헌;신헌철
    • 대한금속재료학회지
    • /
    • 제47권10호
    • /
    • pp.644-651
    • /
    • 2009
  • The passivation (or deactivation) of a metal surface during oxide film formation has been quantitatively explored for a ferritic stainless steel by using dynamic electrochemical impedance spectroscopy (DEIS). For this purpose, the electrochemical impedance spectra were carefully examined as a function of applied potential in the active nose region of the potentiodynamic polarization curve, to separate the charge transfer resistance and oxide film resistance. From the discrepancy in the potential dependence between the experimental charge transfer resistance and the semi-empirically expected one, the degree of passivation could be quantitatively estimated. The sensitivity of passivation of the steel surface to anodic potential, which might be the measure of the quality of the oxide film formed under unit driving force or over-potential, decreased by 31% when 3.5 wt% NaCl was added to a 5 wt% $H_2SO_4$ solution.

V-Nb Microalloyed 강의 오스테나이트역에서 복합 탄질화물의 재용해 및 석출 거동 (Dissolution and Precipitation behaviors of Complex Carbonitrides in Austenite of a V-Nb Microalloyed Steel)

  • 하양수;정재길;이영국
    • 대한금속재료학회지
    • /
    • 제49권12호
    • /
    • pp.917-923
    • /
    • 2011
  • Dissolution and precipitation behaviors of complex carbonitrides in austenite of a V-Nb microalloyed steel were quantitatively examined through electrical resistivity measurement and transmission electron microscopy. The electrical resistivity increased with solution treatment temperature up to $1240^{\circ}C$ and then was saturated at $225n{\Omega}m$ for a holding time of 10 min. The electrical resistivity method was also used to quantitatively measure the isothermal precipitation kinetics of the complex carbonitrides in austenite. Nb-rich precipitates were observed in austenite at the early stages of precipitation, but Nb was replaced by V up to the equilibrium amount within the precipitates with further holding time. The time-temperature-precipitation diagram showed a C-type curve; nose temperature and its incubation time were $900^{\circ}C$ and 100 s, respectively.

패션 일러스트레이션에 나타난 얼굴해체 - 프란시스 베이컨 회화의 얼굴해체를 바탕으로 - (An analysis on the Deconstructed Visage in Fashion Illustration - Based on the Deconstructed Visage of Francis Bacon's Painting -)

  • 최정화;최유진
    • 한국의류산업학회지
    • /
    • 제15권6호
    • /
    • pp.874-885
    • /
    • 2013
  • This study analyzes the visage in fashion illustration based on the deconstructed visage of Francis Bacon's paintings as well as analyzes fashion illustration works since 2000. The deconstructed visages in Francis Bacon's paintings are classified as blurring, elimination, distortion and division. The expressive methods and meanings in fashion illustration (according to categorization) are as follow. Blurring shows an ambiguous visage organ by the sweeping of the brush, removal of a boundary among the visage, body and clothes, gradation of organic line like visage shapes, stretching of the a plat combined to visage and fragmentation of visage. It represents an uncertainty of the fashion theme and image interpretation, impossibility of figure by ambiguity, fantastic effect and the induction of the uncanny. Elimination shows the background color's painting of a photo-montage, overlap of a cutting of visage's part and background of a plat, elimination of the visage and the elimination of eyes, nose or lips. It represents a weakened identity, the reinforcement of anonymity, creation of a violent image, and uncanny unfamiliarity. Distortion shows a distorted visage by free drawing, and unconscious drawing line, fluid digital body, combination of an unconscious curve, and an eccentric combination of the accidental. It represents the relief of specialty about realistic existence, hypothetical immateriality and fantasy. Division shows overlapped visages with different angles, the weird combination of a plural visage and different species and a plural breakaway of direction, and the position of several organs. It represents motion by power's trace, non-territory of species, ambiguity and uncertainty and the uncanny.

SAE 1078 강의 오스템퍼링 열처리시 가스 퀜칭 속도에 따른 미세조직의 변화 (Change in Microstructure with the Gas Quenching Rate during Austempering Treatment of SAE 1078 Steel)

  • 권기훈;박현준;여국현;이영국;김상권
    • 열처리공학회지
    • /
    • 제36권3호
    • /
    • pp.121-127
    • /
    • 2023
  • When high carbon steel is heated in an appropriate austenizing temperature range and subjected to austempering, the size and shape of lamellar structure can be controlled. The high carbon steel sheet having the pearlite structure has excellent elastic characteristics because it has strong restoring force when properly rolled, and is applied in a process known as patenting-process using lead bath. In the case of isothermal treatment using lead-medium, it is possible to quickly reach a uniform temperature due to high heat transfer characteristics, but it is difficult to replace it with process technology that requires treatment to remove harmfulness lead. In this study, we intend to develop fluidization technology using garnet powder to replace the lead medium. After heating the high-carbon steel, the cooling rate was changed by compressed air to the vicinity of the nose of the continuous cooling curve, and then maintained for 90 s and then exposed to room temperature. The microstructure of the treated specimens were analyzed and compared with the existing products treated with lead bath. The higher the flow rate of compressed air, the faster the cooling rate to the pearlite transformation temperature, so lamellar spacing decreases and the hardness tends to increase.

API J55강의 미세조직과 기계적 특성에 미치는 열처리 및 합금원소(B, Ti)의 영향 (Microstructures and Mechanical Properties of API J55 steel with Heat treatment conditions and Alloying elements(B, Ti))

  • 최종민
    • 한국산학기술학회논문지
    • /
    • 제19권4호
    • /
    • pp.69-76
    • /
    • 2018
  • 본 연구에서는 유정용 강관의 열처리 조건 및 합금원소(B, Ti)에 따른 미세조직 및 기계적 성질을 조사하였다. 실험에는 J55, J55+B,Ti 강재를 사용하였고, 열처리 조건은 각각 오스테나이트 처리온도 ($880^{\circ}C$, $910^{\circ}C$, $940^{\circ}C$), 냉각방식 (수냉, 유냉), 템퍼링 온도 (미실시, $550^{\circ}C$, $650^{\circ}C$) 이다. 열처리 조건에 따라 얻어지는 미세조직을 예측하기 위해 J55, J55+B,Ti 강재의 화학적 성분을 기준으로 평형상태도와 CCT 곡선을 예측하였다. 시뮬레이션 결과 평형상태도는 A1, A3 온도가 약 $20^{\circ}C$ 감소하였고, CCT 곡선은 B, Ti이 첨가됨에 따라 ferrite와 bainite nose 부분이 오른쪽으로 이동하였다. J55, J55+B,Ti 강재의 CCT 곡선을 기준으로 냉각속도에 따른 martensite, bainite, ferrite등 예상되는 미세조직을 예측하였고, J55 강재의 미세조직 예측값은 실제 실험값과 유사한 양상을 나타내었지만. J55+B,Ti 강재의 예측값은 실제 실험값과는 차이가 있었다. 열처리 조건이 변화됨에 따라 martensite, bainite, ferrite 등 다양한 조직이 생성되었으며, 이는 경도, 강도 및 연신율에 밀접한 영향을 미쳤다. J55시편의 수냉의 경우 martensite 조직이 형성되었고, 유냉의 경우 bainite와 ferrite 조직이 형성되었지만, J55+B,Ti시편은 B의 첨가에 의한 경화능 향상으로 냉각방식에 관계없이 martensite 조직이 형성되었다. 전반적으로 B, Ti을 첨가하면서 기계적 성질은 향상되었고, quenching 이후의 시편보다 tempering 이후의 시편에서 크게 향상되었다. 이는 Ti의 첨가로 인해 생성된 미세한 석출물이 재결정시 결정립 성장을 억제하여 미세한 오스테나이트 결정립을 생성하였고, tempering 열처리 이후에도 결정립 미세화 효과가 큰 영향을 미친 것으로 판단된다.

히스타민 기관지유발 검사 -일정시간 흡입법- (Histamine Bronchial Provocation Test -Timed Tidal Breathing Technique-)

  • 정연태;원경숙;박해심
    • Tuberculosis and Respiratory Diseases
    • /
    • 제41권3호
    • /
    • pp.270-276
    • /
    • 1994
  • 연구배경 : 임상에서 기관지과민성의 측정은 천식의 진단과 심한 정도 판정에 유용하므로 널리 쓰이고 있다. 비특이적 기관지 과민성의 측정은 히스타민등의 약물에 의한 기관지 유발검사법이 비교적 쉽게 시행할 수 있으므로 흔히 사용된다. 약물에 의한 기관지 유발검사시 에어로졸의 흡입방법으로 정량 흡입법(dosing technique with counted number of breaths)과 일정시간 흡입법(timed tidal breathing technique)이 널리 사용되고 있다. 일정시간 흡입법은 간단하면서 정확도와 재현성은 정량 흡입법과 차이가 없으며, 비싼 dosimeter가 필요하지 않다. 저자들은 이러한 관점에서 이 검사법은 국내의 임상 현실에 적합한 방법으로 생각하여 히스타민을 이용하여 일정시간 흡입법으로 기관지과민성 측정하는 방법을 소개하고자 한다. 방법: 대상은 정상대조군 42예, 기관지천식 환자 12예, 비염 환자 10예, 그리고 상기도감염 10예이었다, Jet nebulizer를 사용하였으며, 히스타민을 buffered phosphate saline 에 녹혀서, 0.0625부터 25.0mg/ml까지 연속적인 농도의 용액으로 준비하였다. 검사방법은 코를 nose clip으로 막고 마스크를 이용하여 입으로 에어로졸을 2분간 흡입한다. 흡입 후 $FEV_1$을 30초와 90초 후 2번 측정한다. 먼저 생리식염수를 흡입한 후 기저 $FEV_1$ 구한 후, 최저 농도의 히스타민 용액부터 흡입하여 $FEV_1$이 20% 이상 감소할 때까지 반복 흡입한다. 유발농도 20은 먼저 대수 양-반응곡선을 그린 후, 마지막 두 점을 직선 보간(linear interpolation)하여 구하였다. 결과: 생리식염수 흡입후 FEV1보다 20% 이상 감소하는 농도까지 히스타민 흡입은 정상대조군 42예 중 10예를 제외하고 각각의 대상군에서 모두 가능하였으며, 히스타민 유발농도 20을 구할 수 있었다. 정상대조군의 히스타민 유발농도 20의 기하학적 평균값(Geometric Mean${\pm}$Standard Deviation)은 $8.27{\pm}2.22mg/ml$, 기관지 천식군은 $0.33{\pm}3.02mg/ml$, 비염군은 $0.85{\pm}3.24mg/ml $, 그리고 상기도감염군은 $1.47{\pm}1.98mg/ml$이었다. 히스타민 2.5mg/ml 이상의 고농도 용액의 에어로졸 흡입시는 가벼운 부작용은 있었으나 대부분 흡입이 가능하였다. 결론: 히스타민 일정시간 흡입법은 간단한 기구로 시행할 수 있으므로, 우리 현실에 적합한 기관지 유발검사법이라고 생각한다.

  • PDF

한국 젊은이의 안면미 선호경향에 관한 연구 : 얼굴의 측모평가를 중심으로 (A STUDY ON THE FACIAL ESTHETIC PREFERENCES AMONG KOREAN YOUTHS: ASSESSMENT OF PROFILE PREFERENCES)

  • 송세진;최익찬
    • 대한치과교정학회지
    • /
    • 제22권4호
    • /
    • pp.881-920
    • /
    • 1992
  • This study was designed to assess profile preferences among Korean youths in the year 1992. Facial esthetics was evaluated by means of silhouette profiles, eliminating the influence of a number of aspects that may affect judgment when normal lateral photographs are used. The main points of preference to be clarified here are as follows. First, on facial convexity, Second, on nasion depth, Third, on mentolabial sulcus depth, Fourth, on the position of upper and lower lips, Fifth, on facial type according to Angle's classification of malocclusion, Sixth, on Song's tangents. The 54 subjects printed in questionnaire as black and white silhouettes were selected from 300 tracings from cephalometric radiographs of people whose age ranging from 11 to 20 years. Photographs of six female subjects were retouched by computer graphic software and printed in color and black/white photographs which were used for adaptation of eyes of participants in selecting profiles in silhouette. They constitute 2 questions. The 54 subjects were grouped as 22 questions, each of them composed of 6 subjects, according to the aspects to be clarified. Twenty four questions in total were asked to assess profile preferences. For the assessment, the profile line, the facial esthetic triangle, Song's tangents, and Angle's classification of malocclusion were introduced. The profile line is composed of 11 component points which are Trichion, Glabella, Nasion, Pronasale, Subnasale, Labrale superius, Stomion, Labrale inferius, Supramentale, Pogonion, and Gnathion. The facial esthetic triangle is composed of 3 tangents: A-tangent which is the tangent of dorsum of nose, B-tangent which is the line passing through Sn and Ls, and C-tangent which is drawn on the turning point of the curve which lies between mentolabial sulcus (Sm) and pogonion (Pg). Angle's classification has 3 types of malocclusion which are Class I, Class II, and Class III. Class II malocclusion is subdivided into Division 1 and Division 2. The participants of the survey were composed of 861 college students (448 male students, 413 female students) whose majors grouped as Fine Arts. Liberal Arts, and Natural Sciences, and whose mean age 21.8 years. The statistics program SPSS/PC + of SPSS Inc. was used to analyze answers of participants. Crosstabulation, Chi-square test, and Kendall test were done. The conclusions are as follows: First, Korean youths have a tendency to prefer the slightly convex face to the flat or concave face. Second, they prefer a moderately deep nasion. Third, they prefer a moderately deep mentolabial sulcus. Fourth, they prefer the position of lips which are near to Ricketts' E-line. The position of the upper lip which is slightly posterior to E-line is preferred. The upper lip which lies too far anterior or posterior to the lower lip is not perferred. Fifth, they prefer most, according to Angle's Classification of Malocclusion, Class I facial profile which has a slight inclination to Class II division 2. The order of preference is Class I, Class II division 2, Class III, and Class II division 1. Sixth, they prefer the type 2 and 3 of Song's tangents. The facial profile within which A-and B-tangent meet is preferred. The facial profile which has Cotangent that .meets with A-tangent slightly posterior to the crossing point of A-and B-tangent or that parallels with B-tangent is preferred.

  • PDF

시공 중 곡선형 PCT 거더교의 처짐 관리를 위한 GPS 적용 연구 (A Study on Application of GPS for Deflection Management of Curved PCT Girder Bridge under Construction)

  • 이규달;이진덕
    • 한국측량학회지
    • /
    • 제33권5호
    • /
    • pp.453-461
    • /
    • 2015
  • 이 연구에서는 시공 중에 있는 곡선형 PCT 거더교의 처짐 관리를 위해 압출 시 예상되는 취약부위에 GPS를 설치하고 시공단계에 따라 처짐변위를 측정하였으며 응력, 온도 및 경사변위를 측정하여 GPS 관측데이터와 처짐변위와 비교하였다. 압출거리에 따른 GPS 실측값과 유한요소 모델링 해석값을 비교 분석한 결과, 실측값이 해석값에 비해 0.6∼1.6배 정도 차이가 발생하였으나, 온도를 보정함으로써 그 차이가 크게 감소하였다. 교량 거동 형상 분석 결과, 시공중 거동은 95m 지점과 75m 지점에서 노즈 선단부에 처짐이 발생하는 것을 확인하였으며 압축 취약부는 압축, 인장취약부는 인장력이 발생하였다. 연구결과, GPS 적용함으로써 시공 중 곡선형 PCT 거더교의 처짐 관리를 보다 효율적으로 가능할 것으로 판단되며, 향후 동일 공법의 교량을 시공할 시 향후 거동을 예측하고 관리하는데 도움을 줄 것으로 판단된다.