• Journal of Korea Water Resources Association
• /
• v.38 no.10 s.159
• /
• pp.851-859
• /
• 2005

Normalized cross-correlation (correlation coefficient) is a useful measure for pattern matching in PIV (Particle Image Velocimetry) analysis. Because it does not have a corresponding simple expression in frequency domain, several fast but inexact measures have been used. Among them, three measures of correlation for PIV analysis and the normalized cross-correlation were evaluated with a sample calculation. The test revealed that all other proposed correlation measures sometimes show inaccurate results, except the normalized cross-correlation. However, correlation coefficient method has a weakpoint that it requires so long time for calculation. To overcome this shortcoming, a fast and exact method for calculating normalized cross-correlation is suggested. It adopts Fast Fourier Transform (FFT) for calculation of covariance and the successive-summing method for the denominator of correlation coefficient. The new algorithm showed that it is really fast and exact in calculating correlation coefficient.

• Journal of Mechanical Science and Technology
• /
• v.14 no.5
• /
• pp.518-529
• /
• 2000

A detailed and thorough parametric study of digital image correlation method is presented. A theoretical background and development of the method were introduced and the effects of various parameters on the determination of displacement outputs from the raw original and deformed image information were examined. Use of the normalized correlation coefficient, the use of 20 to 40 pixels for a searching window side, 6 variables searching, bi-cubic spline sub pixel interpolations and the use of coarse-fine search are some of the key choices among the results of parametric studies. The displacement outputs can be further processed with two dimensional curve fitting for the data noise reduction as well as displacement gradient calculation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.287-293
• /
• 2012

This paper presents an efficient image registration method by measuring the similarity, which is based on multi-dimensional intensity fluctuation. Multi-dimensional intensity which considers 4 directions of the image, is applied to reflect more properties in similarity decision. And an intensity fluctuation is also applied to measure comprehensively the similarity by considering a change in brightness between the adjacent pixels of image. The normalized cross-correlation(NCC) is calculated by considering an intensity fluctuation to each of 4 directions. The 5 correlation coefficients based on the NCC have been used to measure the registration, which are total NCC, the arithmetical mean and a simple product on the correlation coefficient of each direction and on the normalized correlation coefficient by the maximum NCC, respectively. The proposed method has been applied to the problem for registrating the 22 face images of 243*243 pixels and the 9 person images of 500*500 pixels, respectively. The experimental results show that the proposed method has a superior registration performance that appears the image properties well. Especially, the arithmetical mean on the correlation coefficient of each direction is the best registration measure.

• The KIPS Transactions:PartB
• /
• v.10B no.1
• /
• pp.73-80
• /
• 2003

In this paper we propose an algorithm which matches the corresponding feature points between the reference image and the search image. We use Harris's corner detector to find the feature points in both image. For each feature point in the reference image, we can extract the candidate matching points as feature points in the starch image which the normalized correlation coefficient goes greater than a threshold. Finally we determine a corresponding feature points among candidate points by using dynamic programming. In experiments we show results that match feature points in synthetic image and real image.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.548-553
• /
• 2010

This paper presents an effective shape image recognition method using the correlation based on 4-dimensional histogram. The histogram-based correlation is accurately applied to express the similarity by comparing the positions of a corresponding dimension between the images, which is calculated by considering 4 directions of the shape image. The correlation measure by using the normalized cross-correlation is also applied to obtain the robust recognition to the geometrical variations such as shape, position, size, and rotation. The proposed method has been applied to the problem for recognizing the 8 shape images of 64*64 pixels and the 30 shape images of 256*256 pixels. The experimental results show that the proposed method has a superior recognition performance that appears the image characters well.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5C
• /
• pp.478-486
• /
• 2007

Double-talk detection errors can result in either large residual echo or distorting the near-end talker's input speech. Thus accurate double-talk detection is an important problem in the acoustic echo canceller to improve the speech quality. In the double-talk detection algorithm using a cross-correlation coefficient, double-talk detection errors can occur in the initial convergence period of an adaptive filter or in noisy environment since the cross-correlation coefficient becomes large in such situations. In this paper, we propose a new double-talk detection algorithm based on the cross-correlation method using a normalized error signal power to reduce the double-talk detection errors. The experimental results have shown the performance improvement of an acoustic echo canceller as well as the noise-robustness of the proposed double-talk detector.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2919-2922
• /
• 2003

In this paper, we present a new methodology to analyze the characteristics of artery by using 4 channels photophethysmography. The proposed parameter is a time difference of pulse transit time (PTT) between pulse waves at finger site and at toe site. As the results of experiments, the change of parameter was found according to ages. The result of regression analysis about relationships between the parameter and ages for n=51, the coefficient of correlation of non-normalized data has -0.79770 in left side and -0.80599 in right side and the coefficient of correlation of normalized data by height has -0.81345 in left side and -0.81605 in right side.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.9
• /
• pp.913-917
• /
• 2010

To inspect the defects of printed markings on the surface of IC package, the OCV (Optical Character Verification) method based on NCC (Normalized Correlation Coefficient) pattern matching is widely used. In order to detect the micro pattern defects appearing on the small portion of the markings, a Partitioned NCC pattern matching method was proposed to overcome the limitation of the NCC pattern matching. In this method, the reference pattern is first partitioned into several blocks and the NCC values are computed and are combined in these small partitioned blocks, rather than just using the NCC value for the whole reference pattern. In this paper, we proposed a method to decide the proper number of partition blocks and a method to inspect and combine the NCC values of each partitioned block to identify the defective markings.

• Journal of information and communication convergence engineering
• /
• v.9 no.2
• /
• pp.201-206
• /
• 2011

FRUC (Frame Rate Up-Conversion) technique needs an effective frame interpolation algorithm using motion information between adjacent neighboring frames. In order to have good visual qualities in the interpolated frames, it is necessary to develop an effective detection and interpolation algorithms for occluded regions. For this aim, this paper proposes an effective occluded region detection algorithm through the adaptive forward and backward motion searches and also by introducing the minimum value of normalized cross-correlation coefficient (NCCC). That is, the proposed scheme looks for the location with the minimum sum of absolute differences (SAD) and this value is compared to that of the location with the maximum value of NCCC based on the statistics of those relations. And, these results are compared with the size of motion vector and then the proposed algorithm decides whether the given block is the occluded region or not. Furthermore, once the occluded regions are classified, then this paper proposes an adaptive interpolation algorithm for occluded regions, which still exist in the merged frame, by using the neighboring pixel information and the available data in the occluded block. Computer simulations show that the proposed algorithm can effectively classify the occluded region, compared to the conventional SAD-based method and the performance of the proposed interpolation algorithm has better PSNR than the conventional algorithms.

• Transactions of Materials Processing
• /
• v.27 no.2
• /
• pp.115-122
• /
• 2018

Most domestic and international standards on the forming limit diagram (FLD) including ISO 12004-2, use a 'position-dependent method,' which determines the forming limit from a strain distribution measured on the specimen after necking or fracture. However, the position-dependent method has inherent problems such as the incidence of asymmetry of a strain distribution, the estimation of missing data near fracture, the termination time of test, and the deformation due to the new stress equilibrium after a fracture, which is blamed for causing sometimes a significant lab-to-lab variation. The 'time-dependent method,' which is anticipated to be a new international standard for evaluating the forming limit, is expected to greatly improve these intrinsic disadvantages of the position-dependent method. It is because the time-dependent method makes it possible to identify and accurately determine the forming limit, just before the necking point from the strain data as continuously measured in a short time interval. In this study, we propose a new time-dependent method based on a Gaussian fitting of strain acceleration with the introduction of 'normalized correlation coefficient.' It has been shown in this study that this method can determine the forming limit very stably and gives a higher value, which is in comparison with the results of the previously studied position-dependent and time-dependent methods.