• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 1995년도 Symposium and Workshop
• /
• pp.46-46
• /
• 1995

We investigated the reliablity of the ultrasonography for diagnosis of rotatar cuff taers. We prepared histological sections of forty shoulder joints In match the ultrasound planes, and conducted a comparative study of tke two sets of images. hi cases of rotator cuff tear, hyperechogenic and cartilaginfication of the tear site were detected as hyperechogenic foci. On the countrary, the regions in which tendon fibers were decreased or absent showed sonolucent areas. We caluculated the echo level of rotator cuff objectively. The area of abnormal echo level and the other regions located in the same depth of the rotator cuff were defined by ultrasonic equipment. The mein difference in these two echo levels was calculated. The mean difference in patients with rotator cuff tears was larger than that in normal cases. These results indicate that ultrasonography is a useful procedure in many patients with rotator cuff lesions.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.276-279
• /
• 2003

The superconducting synchronous machine(S.S.M) including generator and motor has different electromagnetic structure from the conventional machine. With the help of superconductor having much higher operating current density than normal conductor, S.S.M can eliminate most of iron core filling inside of the conventional machine. This air-cored structure could be analysed and designed theoretically based on 2-dimensional(2-D) magnetic field distribution assuming that the windings are extended infinitely toward the axial direction. However the actual structure of S.S.M has the end regions interconnecting the straight parts of the same cross-section with the 2-D model. Therefore, this actual 3-D model has smaller field distribution than the 2-D model. In this paper, we consider the effect of the end regions on the output of a HTS model motor and suggest more accurate design approach through comparison of 2-D and 3-D magnetic field analysis.

• Journal of the Korean Data and Information Science Society
• /
• 제27권5호
• /
• pp.1225-1239
• /
• 2016

We investigate pediatric tumor incidence data collected by the Florida Association for Pediatric Tumor program using various models commonly used in disease mapping analysis. Particularly, we consider Poisson normal models with various conditional autoregressive structure for spatial dependence, a zero-in ated component to capture excess zero counts and a spatio-temporal model to capture spatial and temporal dependence, together. We found that intrinsic conditional autoregressive model provides the smallest Deviance Information Criterion (DIC) among the models when only spatial dependence is considered. On the other hand, adding an autoregressive structure over time decreases DIC over the model without time dependence component. We adopt weighted ranks squared error loss to identify high risk regions which provides similar results with other researchers who have worked on the same data set (e.g. Zhang et al., 2014; Wang and Rodriguez, 2014). Our results, thus, provide additional statistical support on those identied high risk regions discovered by the other researchers.

• Nuclear Engineering and Technology
• /
• 제26권4호
• /
• pp.570-577
• /
• 1994

The loss of water in the carbon steel balls and water region of the end shield for CANDU 6 reactor could lead to significant temperature gradient through the end shield structure which amy result in the excessive deformation. With an assumed end shield drained scenario, the heat deposition rates were calculated through the end shield associated with the central fuel channel during full power operation as an initial step to thermal stress analysis. The drained case was compared with that of water present normal case in therms of heat deposition rater and the total heating throughout the end shield regions. The compared results show that the heat deposition and the total heating remain almost the same between the two cases. It was found that the change of volume integrated flux in the end shield regions due to the loss of water contribute a negligible effect on the heat deposition in this region.

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.516-523
• /
• 2020

The normal low-cost manufacturing process for freeform vehicle side mirrors causes deviations from the design curvature. Here, an improved manufacturing process is proposed, combining photorealistic ray-traced visualization of each deviation and subsequent analysis of its deviated reflective scene compared to that of the original design. The proposed mechanism successfully highlights the overlap and mismatch regions of deviated reflected scenes with reference to the desired reflective scenes. We benchmarked the robustness of freeform mirror manufacturing by evaluating the 10, 20, and 30% root-mean-square (RMS) deviated curvature, and concluded that the acceptable deviation needs to be below RMS20% to avoid mismatched regions that could mislead the driver.

• Communications for Statistical Applications and Methods
• /
• 제31권1호
• /
• pp.37-53
• /
• 2024

In this study, flood records from 79 sites across Thailand were analyzed to estimate flood indices using the regional frequency analysis based on the L-moments method. Observation sites were grouped into homogeneous regions using k-means and Ward's clustering techniques. Among various distributions evaluated, the generalized extreme value distribution emerged as the most appropriate for certain regions. Regional growth curves were subsequently established for each delineated region. Furthermore, 20- and 100-year return values were derived to illustrate the recurrence intervals of maximum rainfall across Thailand. The predicted return values tend to increase at each site, which is associated with growth curves that could describe an increasing long-term predictive pattern. The findings of this study hold significant implications for water management strategies and the design of flood mitigation structures in the country.

• 대한핵의학회지
• /
• 제23권2호
• /
• pp.155-163
• /
• 1989

Regional cerebral perfusion was evaluated in 15 normal controls by single photon emission computed tomography using $^{99m}Tc$ HM-PAO. For quantitative analysis, 13 pairs of homologous region of interest (ROI) were drawn on three transverse slices matching the vascular territories and cerebral cortices, and normal values of 3 semiqunatitative indices including 'Right to left ratio'(R/L ratio), 'Regional index'(RI), and 'Region to cerebellum ratio'(R/cbll ratio) were calculated. Mean values of R/L ratios of homotogous regions were ranged from 0.985 to 1.023, and mean ${\pm}2$ s.d. of all regions did not exceed 11% of mean. Significant difference of RIs (mean count per voxel of a ROI/mean count per voxel of total ROIs) between regions were found (p<0.001) with highest values in occipital cortex and cerebellum. After attenuation correction, RIs in deep gray, cranial portion of anterior cerebral artery and vascular territories in the 2nd slice increased significantly (p < 0.05-0.001), but vise versa in other ROIs. Region to cerebellum ratios also showed regional difference similar to RIs.

• 한국농림기상학회지
• /
• 제2권3호
• /
• pp.95-102
• /
• 2000

근래의 '춥지 않은 겨울'현상의 연속출현으로 가을 보리의 재배지역의 북상에 따른 재배면적 확대를 논의 할 만하다. 최근('74∼'98년)의 가을보리재배기간(10∼5월)의 기상변화를 살펴보고 '87년을 기준으로 '춥지 않은 겨울현상'을 보인 13년('87∼'99년) 그전 13년('74∼'86년)의 가을보리 재배기간의 기상을 평년('61∼'90년)기상과 비교ㆍ분석한 결과는 다음과 같다. 1. 최근 25년 동안 가을보리재배기간의 평균기온은 1.02℃ 증가하였으며, 평균기온의 상승은 최저기온보다 최고기온의 상승이 더 크게 기여하였다. 2. 가을보리재배기간의 연도별 강수량은 최근 25년 동안 전국평균이 513.3 ㎜ 이었으며.'74년 이후 감소하다가 '92년 이후로는 다시 증가하는 경향이었으며, 일조시간은 농촌지역만 조금 적어지는 경향이고 다른 지역들은 조금씩 증가하는 경향을 보였다. 3. '춥지 않은 겨울' 현상을 보인 최근 13년의 가을보리재배기간의 기온은 평년보다 높았으며 특히 1∼2월의 기온이 많이 상승하였다 반면에 '87년을 기준으로 그전 13년의 기온은 평년과 비슷하거나 다소 낮은 경향을 보였다. 4. '춥지 않은 겨울'현상을 보인 최근 13년의 가을 보리재배기간의 강수량은 평년과 전반적으로 비슷하였으나, 4월의 강수량이 전국적으로 평년보다 26㎜정도 적었다. 반면에 일조시간은 전반적으로 평년보다 적었다 그러나, '87년을 기준으로 그전 13년의 강수량과 일조시간은 대체로 평년과 비슷하였다. 5. 가을보리의 안전재배선의 기준이 되는 월동기(1∼2월)의 기온상승으로 가을보리안전재배의 북상이 전망된다.

• Wind and Structures
• /
• 제6권2호
• /
• pp.91-106
• /
• 2003

The paper presents the results of 1:50 geometrical scale laboratory modeling of wind-induced point pressure on the roof of the Texas Tech University (TTU) test building. The nominal (prevalent at the TTU site) wind and two bounding (low and high turbulence) flows were simulated in a boundary-layer wind tunnel at Colorado State University. The results showed significant increase in the pressure peak and standard deviation with an increase in the flow turbulence. It was concluded that the roof mid-plane pressure sensitivity to the turbulence intensity was the cause of the previously reported field-laboratory mismatch of the fluctuating pressure, for wind normal and $30^{\circ}$-off normal to the building ridge. In addition, it was concluded that the cornering wind mismatch in the roof corner/edge regions could not be solely attributed to the wind-azimuth-independent discrepancy between the turbulence intensity of the approach field and laboratory flows.

• Structural Engineering and Mechanics
• /
• 제36권1호
• /
• pp.95-110
• /
• 2010

Two-dimensional elastic contact problems, including normal, tangential, and rolling contacts, are treated with the finite element method in this study. Stress boundary conditions and kinematic conditions are transformed into multiple point constraints for nodal displacements in the finite element method. Upon imposing these constraints into the finite element system equations, the calculated nodal stresses and nodal displacements satisfy stress and displacement contact conditions exactly. Frictional and frictionless contacts between elastically identical as well as elastically dissimilar materials are treated in this study. The contact lengths, sizes of slip and stick regions, the normal and the shear stresses can be found.