• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.3 s.180
• /
• pp.187-194
• /
• 2006

Unexpected postoperative changes, such as growth in rib hump and shoulder unbalance, have been occasionally reported after corrective surgery for scoliosis. However there has been neither experimental data fer explanation of these changes, nor the suggestion of optimal correction method. Therefore, the numerical study was designed to investigate the post-operative changes of vertebral rotation and rib cage deformation after the corrective surgery of scoliosis. A mathematical finite element model of normal spine including rib cage, sternum, both clavicles, and pelvis was developed with anatomical details. In this study, we also developed a special program which could convert a normal spine model to a desired scoliotic spine model automatically. A personalized skeletal deformity of scoliosis model was reconstructed with X-ray images of a scoliosis patient from the normal spine structures and rib cage model. The geometric mapping was performed by translating and rotating the spinal column with an amount analyzed from the digitized 12 built-in coordinate axes in each vertebral image. By utilizing this program, problems generated in mapping procedure such as facet joint overlapping, vertebral body deformity could be automatically resolved.

• Transactions of Materials Processing
• /
• v.8 no.5
• /
• pp.507-519
• /
• 1999

An approach using the energy method has veen proposed for the analysis of cone spinning having the complicated deformation modes mixed by shear and normal deformation. In the proposed method, the corresponding solution is found through optimization of the total energy dissipation with respect to the parameters assumed by the velocity field defined as the variation of the length in longitudinal direction. The sheet blank is divided into three layers to consider the bending effect and the energy dissipated by shear deformation is superposed to the energy consumption due to normal deformation related with the shrinking deformation is superposed to the energy consumption due to normal deformation related with the shrinking deformation of axi-symmetric sheet element for the evaluation of total deformation energy. In order to check the validity of the proposed method, the complex spinning for making the conical cup is analyzed and the computed results are compared with the experimental results. In comparison of the computed results with existing experimental results,, the good agreement is obtained for the variation of outer radius and the distribution of thickness, and it has thus been shown that the present approach is applicable to the analysis of complex spinning.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.324-324
• /
• 2008

Piezoelectric ceramics is an active element that makes stator to vibrate to generate rotational force in ultrasonic motors. In drive of ultrasonic motors, many factors that affect to the resonance characteristics of piezoelectric ceramics exist. For example, those factors are bonding condition with elastic body, the magnitude of electric field, the normal force for frictional drive and the emission of heat due to vibration and friction and so on. Therefore, it is important to research the inclination of property variation of piezoelectric ceramics in circumstance that has complex elements. In this paper, we focused and analyzed the resonance characteristics of ultrasonic motor due to the magnitude of the driving voltage and normal force.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.794-797
• /
• 2005

The automatic load transfer switch (ALTS), a kind of electric power switch, typically automatically transfers electrical loads from a normal electrical power source to an emergency electrical power source upon reduction or loss of normal power source voltage. It can also automatically re-transfer the load to the normal power source when the normal voltage has been restored within acceptable limits. The transfer operation of ALTS is accomplished by a spring-driven linkage mechanism. In order to control or delay the transfer switching time, the ALTS studied in this paper uses the superposed leaf springs, which are subjected to impact leadings in contacting with electrical contacts. Therefore, to confirm whether the springs has enough mechanical endurance in ALTS, we build a finite element model of the superposed lear springs using LS-DYNA and perform the impact and fatigue analysis.

• Geomechanics and Engineering
• /
• v.35 no.5
• /
• pp.475-486
• /
• 2023

Ballast particles have an irregular shape and are discrete in nature. Due to the discrete nature of ballast, it exhibits complex mechanical behaviour under loading conditions. The discrete element method (DEM) can model the behaviour of discrete particles under a multitude of loading conditions. DEM is used in this paper to simulate a series of three-dimensional direct shear tests in order to investigate the shear behaviour of railway ballast and its interaction at the microscopic level. Particle flow code in three dimension (PFC3D) models the irregular shape of ballast particles as clump particles. To investigate the influence of particle size distribution (PSD), real PSD of Indian railway ballast specification IRS:GE:1:2004, China high-speed rail (HSR) and French rail specifications are generated. PFC3D built-in linear contact model is used to simulate the interaction of ballast particles under various normal stresses, shearing rate and shear box sizes. The results indicate how shear resistance and volumetric changes in ballast assembly are affected by normal stress, shearing rate, PSD and shear box size. In addition to macroscopic behaviour, DEM represents the microscopic behaviour of ballast particles in the form of particle displacement at different stages of the shearing process.

• Biomedical Science Letters
• /
• v.10 no.4
• /
• pp.385-389
• /
• 2004

A novel gene Jpk, originally isolated as a trans-acting factor associating with the position-specific regulatory element of murine Hox gene has been reported to be expressed differentially in the liver of diabetic animals. Therefore, in an attempt to develop a possible diagnostic marker and/or new therapeutic agent for the Diabetes Mellitus, we analysed the expression pattern of Jpk among organs of normal and diabetic Sprague-Dawley (SD) rats. Total RNAs were isolated from each organs (brain, lung, heart, liver, spleen, kidney, muscle, blood, and testis) of diabetic and normal rats in both normal feeding and after fasting condition. And then RT (reverse transcription) PCR has been performed using Jpk­specific primers. The Jpk gene turned out to be expressed in all organs tested, with some different expression profiles among normal and diabetes, though. Upon fasting, Jpk expressions were reduced in all organs tested except kidney, muscle and brain of normal rat. Whereas in diabetes, Jpk expressions were increased in all organs except heart, muscle and testis when fasted. Compared to the normal rat, the Jpk expression level in blood was remarkably upregulated (about 15-30times) in diabetic rat whether in normal feeding or fasting conditon, suggesting that the Jpk could be a candidate gene for the possible blood diagnostic marker for the Diabetes Mellitus.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.31-45
• /
• 2012

PURPOSES: In Korea, rapid maintenance of distressed concrete pavement is required to prevent traffic jam of the highway. Asphalt concrete overlay has been used as a general maintenance method of construction for aged concrete pavement. AC overlay on existing concrete pavements experience various early distresses such as reflection crack, pothole and rutting, due to different physical characteristics between asphalt overlay and existing concrete pavement. Bonded concrete overlay(BCO) is a good alternative since it has advantages that can reduce various distresses during the service life since overlay material has similar properties with existing concrete pavements. Recently, BCO which uses the ultra rapid harding cement has been applied for maintenance of highway. BCO has advantage of structural performance since it does monolithic behave with existing pavement. Therefore, it is important to have a suitable bond strength criteria for securing performance of BCO. Bond strength criteria should be larger than normal tensile stress and horizontal shear stress occurred by traffic and environmental loading at bond interface. Normal tensile stress and horizontal shear stress need to estimated for the establishment of practical bond strength criteria. METHODS: This study aimed to estimate the bond stresses at the interface of BCO using the three dimensional finite element analysis. RESULTS: As a result of this study, major failure mode and maximum bond stress are evaluated through the analysis of normal tensile stress and horizontal shear stress for various traffic and environmental load conditions. CONCLUSIONS: It was known that normal tensile stresses are dominated by environmental loading, and, horizontal shear stresses are dominated by traffic loading. In addition, bond failure occurred by both of normal tensile stresses and horizontal shear stresses; however, normal tensile stresses are predominated over horizontal shear stresses.

• Korean Journal of Oriental Medicine
• /
• v.2 no.1
• /
• pp.337-380
• /
• 1996

'Nei Jing(內徑)' first defined the interrelationship of the true and tile false between evil factor affecting health(雅氣) and vital essence energy(精氣). According to 「'Nei Jing(內徑)', the above interrelationship is explained as 'If state of evil domination is considered as sthenia-syndrome(雅氣盛則實), if the consumption of healthy energy Is considered as asenia-syndrome(精氣尊則虛): 'Nei Jing(內徑)', proposed major features of the medicall treatment by 'regluate the vatal energy of asthenia and sthenia, treat the sthenia-syndrome by purgation, and treat the asenia-syndrome by therapy of invigoration(調其氣之虛實, 實則瀉之, 虛則補之): The above interrelationship was interpreted as 'treat the asthenia-syndrome of child organ by invigorating the mother organ(虛者補其母)'in the 69th of 'The Classic on Difficulty',(難經 六十九難). Go-Mu(高武) of Myung-dynasty describe therapy for invigoration and purgation of itself-meridian(自經 補瀉法), which locating acupuncture points according to the Therorr of Five Element in the five shu points of itself-meridian(自經 五유穴), based on the generation in the ${\ulcorner}$A Synthetical Book of Acupuncture and Moxibustion(針灸聚英)${\lrcorner}$, Sae-hyun Jang(張世賢) further extended location acupuncture points of the five shu points to the other-meridian in the ${\ulcorner}$Gyeo Jung Do Ju Nan Gyung(校正圖註難經)${\lrcorner}$ Sa-Ahm's 5 Element Acupuncture Method(舍嚴五行鍼法) was originated in 1644, the middle of the Yi-dynasty. It linked the reinforcing and reducing in acupuncture therapy which incorporated tlle asthenia-syndrome and sthenia-syndrome of the hollow organs, based on principle of the Yin Yang 5 Element Theory(陰陽五行學說), not only to the generation in the 5 element(相生關係) but also to the restriction in the 5 element(相剋關係). Furthermore it was devised for the medical treatment by comning therapy for invigoration and purgation of itself-meridian(自經 補瀉法) with that of the other-meridian. Even though many original forms(正形) of the therapy for invigoration and purgation of the Yin Yang 5 Element Theory comply with the principle of the generation and the restriction based on the principle of the Yin Yang 5 Element Theory are abailable, variational forms(變形) are also recognized by examining the nature of the Sa-Ahm's 5 Element Acupuncture Method(舍嚴五行鍼法), For this reason, it is very difficult to understand the Sa-Ahm's 5 Element Acupuncture Method(舍嚴五行鍼法) thoroughly. therefore, those variational forms are obstacles for the beginners to study the Sa-Ahm's 5 Element Acupuncture Method. In order to understand the principle of the practical clinical application of the Sa-Ahm's 5 Element Acupuncture Method, this study investigated which principle was based on the variations of the locating acupuncture points' method for the acupuncture prescription.

• BMB Reports
• /
• v.43 no.1
• /
• pp.17-22
• /
• 2010

In this study, a novel member of BTB-kelch proteins, named KBTBD7, was cloned from a human embryonic heart cDNA library. The cDNA of KBTBD7 is 3,008 bp long and encodes a protein product of 684 amino acids (77.2 kD). This protein is highly conserved in evolution across different species. Western blot analysis indicates that a 77 kD protein specific for KBTBD7 is wildly expressed in all embryonic tissues examined. In COS-7 cells, KBTBD7 proteins are localized to the cytoplasm. KBTBD7 is a transcription activator when fused to GAL4 DNA-binding domain. Deletion analysis indicates that the BTB domain and kelch repeat motif are main regions for transcriptional activation. Overexpression of KBTBD7 in MCF-7 cells activates the transcriptional activities of activator protein-1 (AP-1) and serum response element (SRE), which can be relieved by siRNA. These results suggest that KBTBD7 proteins may act as a new transcriptional activator in mitogen-activated protein kinase (MAPK) signaling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.683-688
• /
• 2018

In this study, we analyzed the heat generation state of a flat heating element by using image processing technology in conjunction with carbon fiber. The flat heating element is manufactured by chopping the carbon fiber to a small size and bonding it again using a dispersing agent. The solution of carbon fiber, bound together using the dispersant, is then filtered onto the nonwoven fabric. The last step is to obtain flat carbon fibers in the form of nonwoven fabrics for the purpose of drying the filtered carbon fibers. In the flat heating element, electricity may be applied to the carbon fiber on the surface produced in this manner. In this study, the flat heating element was analyzed by four methods. The analysis of the heat generation characteristics and heating rate of the flat heating element confirmed that the fabricated sheet heating element corresponds to a normal army. The analysis of the insulation coating and flat heating element module, which can be used for actual product manufacturing, involves two dimensional image analysis using image processing technology. The thermal image analysis of the flat heating element is a programming technique that not only analyzes the heat generation state in both two and three dimensions, but also displays the upper and lower 15 to 20% ranges of temperature corresponding to the heat generation in the image. In the final analysis, it is possible to easily find the erroneous part in the manufacturing process by directly showing the state of the fabricated flat heating element on the screen. By combining this image analysis method of the flat heating element with the existing method, we were able to more accurately analyze the heat generation state.