• 소성∙가공
• /
• 제7권6호
• /
• pp.594-602
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points. the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurments and PAM-STAMP results.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.404-407
• /
• 2008

In the present work, cross-roll rolling was carried out using a rolling mill in which the roll axis is tilted by $7.5^{\circ}$ towards the transverse direction of the rolled sample. The evolution of strain states during cross-roll rolling was investigated by three-dimensional finite element method (FEM) simulation. Parallel to cross-roll rolling, normal-rolling using a conventional rolling mill was also carried out in the same rolling condition for clarifying the effect of cross-roll rolling. It turned out that three shear rate components were all introduced to the rolled sample by the cross-roll rolling process, while only one shear rate component operated during normal-rolling.

• 현장농수산연구지
• /
• 제5권1호
• /
• pp.36-56
• /
• 2003

Selenium(Se) is an essential trace element in the human body. Main function of this element is a catalytic part of antioxidant enzymes that protect cells against the attacks of free radicals that are produced during normal metabolism of the body. Se is also essential for normal function of the immune system and thyroid gland. It also appears to be a key nutrient in counteracting the development of virulence and inhibiting HIV(human immunodeficiency virus) progression to AIDS. It is also required for sperm motility and reduces the depression. Therefore, it is very meaningful that livestock producers generate Se-fortified animal products, such as Se-egg, Se-milk, Se-pork, Se-chicken and Se-beef from the point of producers as well as human heath. However, regulation on Se usage and Se-fortified food/feed is far from being clear in Korea even though Se should be carefully monitored because of its toxicity. Thus, one has to be aware of Se properties when designing Se-fortified animal products.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.169-178
• /
• 1991

본 연구에서는 평면 변형률 강소성 유한요소법을 이용하여 유한요소 수식화를 유도하고 금형이 해석저인 함수로 묘사되는 드로잉 공정을 해석하고, 금형이 해석적인 함수로 묘사되지 않는 실제적인 자동차 성형품의 드로잉 공정을 해석하여 기존의 결과 와 비교하여 본 방법의 타당성을 검토하였다.

• 한국산림과학회지
• /
• 제82권1호
• /
• pp.7-11
• /
• 1993

상해(傷害)에 기인하여 양버즘나무(Platanus occidentalis L.) 수간에 형성된 팽창조직(膨脹組織)의 해부학적(解剖學的) 특성(特性)을 조직학적(組織學的) 및 수량적(數量的) 측면(側面)네서 정상조직(正常組織)과 비교(比較) 고찰(考察)하였다. 팽창조직은 정상조직에 비하여 세포배열이 불규칙적이고 도관요소내 타일로시스가 현저하게 발달되어 있으며, 후벽화(厚壁化)된 목섬유가 흔히 관찰된다는 점, 복합관공이 덜 나타난다는 점에서 차이를 나타내었고, 관공의 직경이 작고 도관요소와 목섬유의 길이가 짧으며 도관빈도(vessel frequency)는 작은 반면, 도관요소내 계단상 천공관의 bar 수(數)가 많으며, 방사조직 빈도(ray frequency)가 크고 방사조직의 폭이 넓으나 높이가 작은 특성(特性)을 나타내었다.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.123-136
• /
• 2008

A new plastic-damage constitutive model applicable to lightweight concrete (LWC) and normal weight concrete (NWC) is proposed in this paper based on both continuum damage mechanics and plasticity theories. Two damage variables are used to represent tensile and compressive damage independently. The effective stress is computed in the Drucker-Prager multi-surface plasticity framework. The stress is then computed by multiplication of the damaged part and the effective part. The proposed model is coded as a user material subroutine and incorporated in a finite element analysis software. The constitutive integration algorithm is implemented by adopting the operator split involving elastic predictor, plastic corrector and damage corrector. The numerical study shows that the algorithm is efficient and robust in the finite element analysis. Experimental investigation is conducted to verify the proposed model involving both static and dynamic tests. The very good agreement between the numerical results and experimental results demonstrates the capability of the proposed model to capture the behaviors of LWC and NWC structures for static and impact loading.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.123-124
• /
• 2006

Usually, hydraulic cylinder is widely used as the actuator in the equipment of construction machines, airplane and military machines. In case of these devices, due to use under severe environment such as water, $SiO^2$ and dust, etc. seal which has high packing ability and long service life has been required. These characteristics are largely influenced by material and geometries of seal such as approach angle, withdrawal angle and interference. Recently, many a study about seal material has been performed so that many materials have been developed. But the concrete studies including the relationships between geometry of seal and sealing performance have hardly been performed yet. Therefore, in this study, we predicted the deformation behavior and contact normal distribution of dust seal with the variation of geometries of seal lip using finite element analysis. And based on the results of analyses, we discussed the effects of the design variables fur sealing performance of the dust seal.

• Computers and Concrete
• /
• 제29권4호
• /
• pp.247-253
• /
• 2022

In this study, the problem of discontinuous contact in two functionally graded (FG) layers resting on a rigid plane and loaded by two rigid blocks is solved by the finite element method (FEM). Separate analyzes are made for the cases where the top surfaces of the problem layers are metal, the bottom surfaces are ceramic and the top surfaces are ceramic and the bottom surfaces are metal. For the problem, it is accepted that all surfaces are frictionless. A two-dimensional FEM analysis of the problem is made by using a special macro added to the ANSYS package program The solution of this study, which has no analytical solution in the literature, is given with FEM. Analyzes are made by loading different Q and P loads on the blocks. The normal stress (σy) distributions at the interfaces of FG layers and between the substrate and the rigid plane interface are obtained. In addition, the starting and ending points of the separations between these surfaces are determined. The normal stresses (σx, σy) and shear stresses (τxy) at the point of separation are obtained along the depth. The results obtained are shown in graphics and tables. With this method, effective results are obtained in a very short time. In addition, analytically complex and long problems can be solved with this method.

• 전산구조공학
• /
• 제9권1호
• /
• pp.93-99
• /
• 1996

서로 다른 두 재료의 접합면에 균열이 수직으로 위치하고 있을 때, 균열에서의 응력특이성차수는 두 재료의 재료특성치에 따라서 변화하게 된다. 이와 같은 균열문제를 해석하기 위하여 다영역경계요소법을 사용하였다. 균열을 포함하는 등매개 경계요소 중간절점의 위치를 적절히 이동하여 놓음으로써 변위에 대한 정확한 형상함수를 나타내었으며, 아울러 트랙션에 대해서도 정확한 보간차수를 나타내도록 시도하였다. 3절점 경계요소를 이용하여 수치해석을 수행하였으며, 이의 결과를 기존의 해석결과와 비교 검토하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.77-82
• /
• 1995

With the aim to utilize pine wood(Pinus densiflora Sieb. et Zucc.) as an interior building materials, such as flooring material, monoethylene glycol(MEG) resin solution was impregnated into greenwood. Specimens of three different qualities, that is, normal wood, resinous wood and compression wood, were prepared. Distribution of resin element(phosphorus) in MEG resin solution-impregnated woods and preservative effectiveness against brown rot fungi(Tyromyces palustris and Serpula lacrymans) of these woods were investigated. The results were as follows: 1. The concentration of phosphorus into cell walls of resinous wood and compression wood was lower compared to that of normal wood. This shows that the quality of wood has an influence on the penetration of MEG resin solution into the wood. It was shown from a leaching test that MEG resin could be leached out easily from the cell walls. 2. The resinous wood and compression wood, even without MEG resin solution impregnation had high decay resistance. For normal wood, significant improvement of preservative effectiveness was observed after impregnation of MEG resin solution. It was shown that MEG resin was leached out from the woods after leaching test, resulting in the reduction of preservative effectiveness. From this result, suitability of MEG resin solution-impregnated woods as an interior materials was recognized.