• 한국구조물진단유지관리공학회 논문집
• /
• 제4권2호
• /
• pp.103-111
• /
• 2000

The objectives of the study are to know the strain distribution and modal dynamic behaviour of steel bridge girders by actual traffic load. The live load effect depends on many parameters including the span length, gross vehicle weight, axle weight, axle configuration so on. For the estimation of static and dynamic characteristic, strain data caused by moving loads and traffic characteristics of passing vehicle under actual traffic load have measured using Bridge Weigh in Motion. To confirm the reliability of BWIM system, strain data measured using the $120{\Omega}$ strain gauge under the same condition. It is considered that the data acquired from BWIM system have reliability through the analysis and comparison between stress measured by strain data from BWIM and computed by FEM. Additionally according to the measured strain data of up-line and down-line on the highway, the up-line bridge grows more faster than the down-line bridge and girder 4 and 5 carry more load when vehicles pass the inner line and girder 2 and 3 does when vehicles pass the outer line as this case(the bridge composed with 5 girders).

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권2호
• /
• pp.90-97
• /
• 2016

Purpose: Majority of bridges and roads in Gangwon Province have been carrying loads associated with heavy materials such as rocks, mining products, and cement. This location-specific live loads have contributed to the present situation of overloading, compared to other provinces in Korea. However, the bridges in Gangwon province are designed by national bridge design specification, without considering the location-specific live load characteristics. Therefore, this study focuses on the real traffic data accumulated on regional weighing station to verify the live load characteristics, including actual live load gross vehicle weight, axle weight axle spacings, and number of trucks. Methods: In order to take into account the location specific live load, a governmental weigh station (38th national highway Miro) have been selected and the passing truck data are processed. Based on the truck survey, trucks are categorized into 3 different shapes, and each shape has been idealized into normal distribution. Then, the resulting survey data are processed to predict the target maximum live load values, including the axle loads and gross vehicle weights in 75 years service life span. Results: The results are compared to the nationally used DB-24 live loads, and the results show that nationally recognized DB-24 live load does not sufficiently represent real traffic in mountaineous region in Gangwon province. Conclusion: The comparison results in the recommendation of location-specific live load that should be taken into account for bridge design and evaluation.

• 산업경영시스템학회지
• /
• 제22권49호
• /
• pp.125-133
• /
• 1999

Nonrecurring congestions are generally caused by random or less predictable events, such as accidents, spilled loads stalled or broken-down vehicles that, temporarily reduce the capacity of the freeway. The purpose of this paper is to present the effect of incidents on the traffic congestion on the urban freeway by simulation method. The simulation scenario is composed of two level traffic conditions, two level incident severities, and eight level incident durations. After incident, the recovering duration to the normal traffic flow, increased by linear of incident duration. Total vehicles travel time increased and average travel speed decreased by squares curve of incident duration. Considering incident impacts, incident management system is evaluated the major function of the urban freeway traffic management system. Also, necessary the related research to detect, verify, and develop effective response strategies for traffic incidents.

• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.845-856
• /
• 2020

이 연구에서는 분리불가능한 허가차량의 통행에 대한 교량의 안전성 평가 체계를 정립하여 제안하였다. 대상으로 하는 허가차량의 하중효과와 도로교설계기준(한계상태설계법)의 설계차량하중의 계수하중효과를 비교하여, 허가차량의 체계를 일상허가와 두 개의 특별허가로 분류하였다. 일상허가 및 특별허가 1에서는 일반차량과 동시 통행하도록 제안하였으며, 특별허가 2에서는 허가차량이 단독 통행하도록 제안하였다. 허가차량의 전후에 동시 통행하는 일반차량의 연행을 고려하기 위하여 도로교설계기준의 표준차로하중을 이용하여 허가 하중 모형을 제안하였다. 제안된 허가 하중 모형을 적용하여 공용중인 프리스트레스트빔교 및 강박스교의 구조해석을 수행하였으며, 도로교설계기준의 하중·저항계수를 이용하여 허가하중 및 설계차량하중의 내하율 계산을 수행하였다. 교량 거더의 휨 및 전단에 대한 내하율 검토 결과 모든 차량하중의 내하율이 크게 계산되어 통행 가능한 것으로 확인되었다. 허가하중 및 설계차량하중의 휨 및 전단에 대한 교량의 신뢰도해석을 수행하여 신뢰도관점에서 충분한 안전성을 확보하는지 여부를 확인하였다. 도로교설계기준의 하중·저항계수를 이용하여 허가하중에 대한 최소요구강도를 계산하였으며, 최소요구강도의 신뢰도해석을 수행하였다. 최소 요구강도의 신뢰도해석 결과 대부분의 허가차량에 대하여 도로교설계기준의 목표신뢰도지수를 확보하는 것으로 확인되었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 가을 학술발표회 논문집
• /
• pp.69-72
• /
• 1991

The purpose of this study is to develop the reliability-based dynamic load model for bridges. Analytial procedure to calculate the dynamic load is developed. Truck traffic is simulated using Monte Carlo method. Static and dynamic loads(deflections) are plotted on the normal probability paper to estimate the mean maximum dynamic load in bridge lifetime. The results may be served as a basis for new LRFD bridge design code.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.815-820
• /
• 1998

Many composite girder bridges have been constructed for about thirty five years. Nowadays they are aged or deteriorated because of th increase in traffic and vehicle loads. In this study, the effect of strengthening with glass fiber sheet is investigated to estimate the possibility for appling for damaged prestressed concrete bridges. One normal and eight cracked specimens which had been preloaded were tested. The cracked specimens were strengthened with either external prestressing or bonding glass fiber sheet, or using both methods. The results showed that the maximum loads are almost same for both methods. So it seems that the strengthening with glass fiber sheet can be used for strengthening damaged prestressed concrete girders. It is important that proper devices should be selected to prevent glass fiber sheet from premature bonding failure below its maximum load, which is similar to end anchorage problem in external prestressing method. It is proved that the devices proposed in this paper have sufficient anchoring capability to increase load carrying capacity.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.245-248
• /
• 2005

Wireless LANs based on the IEEE 802.11 standard are widely spread for use nowadays. Traffic which are conveyed over the WLANs change rapidly from normal data such as Email and Web pages, to multimedia data of high resolution video and voice. To meet QoS (Quality of Service) required by these multimedia traffic, the IEEE 802 committee recently has developed a new standard, IEEE 802.11e. Current IEEE 802.11e, however, is not sufficient to support service differentiations and network performance enhancements, under a varying network environment experiencing as varying channel characteristics and high network loads. Recently, there have been much research to complement this deficiency of 802.11e standard. This paper surveys these research efforts.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.310-314
• /
• 2010

Track geometry changes by traffic loads. The bigger the changes are, the worse the riding comfort and running stability of train. This is so-called track irregularity and is the most important quality parameters of ballasted track. To objectively assess track irregularity, track geometry should be able to be measured. Practically, railway companies in Korea use normal distribution as probability distribution of track irregularity. But some countries use non-normal distribution according to their own track recording system. In this report, reviewed probability distribution of Kyung-Bu high-speed line and tested normality.

• 대한토목학회논문집
• /
• 제26권5D호
• /
• pp.821-829
• /
• 2006

교통하중은 포장 설계 및 해석에서 가장 중요한 입력 변수로서 포장 파손의 주요 원인이 된다. 따라서 정확한 포장 설계 및 해석을 위해서는 적절한 교통하중 정량화가 선행되어야 한다. 전통적으로 교통하중은 혼합된 교통흐름을 설계목적의 하나의 값으로 변환시켜주는 ESALs 관점에서 추정되어왔으나 이는 AASHO 도로 테스트를 통해 도출된 지극히 경험적인 값으로 전 노선망에 대해 평균적인 계수로 적용하기에는 한계가 있다. 이러한 등가단축하중계수의 문제점을 해결하기 위해 선진국에서는 역학적 개념을 도입한 많은 연구를 진행한 결과 역학적-경험적 설계법(Mechanistic-Empirical Design)에 적용할 수 있는 축하중 분포(Axle Load Spectra)를 이용한 교통하중 정량화 방안을 수립하였다. 본 논문에서는 일반국도에 설치 운영되고 있는 WIM 시스템을 통해 수집된 화물차 하중 데이터를 이용하여 축하중 분포 특성(Axle Load Spectra)을 이해하고 혼합정규분포함수에 기초한 축 형태별 하중 분포 모형식을 제시하였으며, 이를 기존 하중 분포 모형과 비교 평가하였다. 본 논문에서 제시한 화물차 축하중 분포 특성 및 축하중 분포 모형식은 향후 일반국도 및 고속도로의 포장 설계법 개발을 위한 교통하중 정량화 방안 수립 시, 과적 차량 단속 정책 수립 시, 도로 유지관리를 위한 계획 수립 시 기초자료로써 활용가능하다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.311-316
• /
• 2001

A failure probability model based on Von-Mises failure criterion and the standard normal probability function is proposed. The effects of varying boundary conditions such as internal fluid pressure, external soil, traffic loads, temperature change and corrosion on failure probability of the buried pipes are systematically investigated. To allow for the uncertainties of the design variables, a reliability analysis technique has been adopted; this also allows calculation of the relative contribution of the random variables and the sensitivity of the failure probability.