• 한국지리정보학회지
• /
• 제20권4호
• /
• pp.55-64
• /
• 2017

본 연구에서는 전국 단위의 방치되어 있는 대나무 임분을 대상으로 GIS를 이용하여 분포 유형구분 및 확산 특성을 평가하였다. 대나무 분포 유형은 확산형, 관리형, 혼합형, 쇠퇴형, 분리형 순으로 분류되었다. 이 중 대표적인 확산 특성을 보이고 있는 대나무 임분을 대상으로 1980년~2010년 30년간 공간 시뮬레이션 한 결과, 사천지역의 죽종혼효 임분은 확산면적 2.5ha, 확산속도 0.08ha/yr, 확산거리 1.1m/yr로 나타났다. 거제지역의 죽순대 임분은 확산면적 1.9ha, 확산속도 0.06ha/yr, 확산거리 0.9m/yr로 나타났으며, 계곡, 능선을 따라 확산 이동하는 특성을 보이는 것으로 나타났다. 향후 본 결과는 대나무 확산 방지 기술 개발에 필요한 기초적인 자료로 활용될 수 있으며, 대나무 자원의 관리 기반을 구축하는데 기여할 것으로 판단된다.

• 한국가스학회지
• /
• 제11권4호
• /
• pp.91-97
• /
• 2007

최근 5년간 가스보일러 사고를 살펴보면 도시가스가 LP가스보다 7.4배 많이 발생하고 있다. 이는 도시 가스보일러사용이 늘어나게 되어 사고율이 증가하는 것으로 보인다. 이러한 보일러 사는 CO 중독에 의한 사고가 87%로 가장 많이 발생하였으며, 타형태의 시보다 인명피해가 4.3배가 높게 나타났다. 따라서 본 연구에서는 CO 중독의 원인인 배기통 분리에 의한 원인을 규명하고, 현재 사용하고 있는 내열실리콘의 성능에 대하여 실험을 통하여 안전성을 입증하자 한다. 실험결과 일반실리콘은 $56^{\circ}C$에 경화가 시작되었으나, 내열실리콘을 $606^{\circ}C$가 되어도 탄화되지 않았다. 또한 배기통의 일반적인 온도인 $150^{\circ}C$에서 일반실리콘은 열화 후 기밀시험에서 누출이 발생하였으나, 내열실리콘은 본래의 성질을 유지하고 있었다. 따라서 배기통 연결부에 내열실리콘을 사용하면 CO 중독으로 인한 인명피해 사고를 줄일 수 있을 것으로 판단된다.

• Journal of Biosystems Engineering
• /
• 제27권1호
• /
• pp.59-66
• /
• 2002

The objectives of the study were to analyze the acoustic characteristics related to the internal quality factors of watermelon(Citrulus Vulgaris Schrad). Among the various internal quality factors, only four factors such as ripeness, inside cavity, yellow belt and blood flesh were considered in this study. Relationships between the internal quality factors, the day after fruit set and the day after harvest were also investigated. Test apparatus was the same as the apparatus described in the previous study(Choi et at., 2000). The selected sample was divided into four groups; 69 samples used for ripeness tests 56 samples for ripeness test along the day after fruit set and for yellow belt detection, 60 samples for ripeness along the day after harvest 44 samples fur blood flesh detection. It was shown that the first peak frequencies shifted to the lower range and the energy ratios of the bandwidths between 0∼550 Hz to the bandwidths between 850∼2500 Hz increased as the day after fruit set elapsed. Since the acoustic responses of the watermelon such as frequency and magnitude began to change from 10 days after harvest, the storage period of watermelon in a normal temperature condition seemed to be approximately 10 days after harvest. The ratios of the first peak amplitude to the maximum peak amplitude fur the sound watermelon showed the higher value than that fur watermelon with cavity inside, and the separation between the sound and cavity inside could be accomplished by the ratio value of 0.25. The energy ratios (0∼550 Hz/850∼2,500 Hz) for the watermelon with cavity inside showed the higher value than 2.3. The frequency characteristics of the yellow belt watermelon appeared mostly in the range of 600∼900 Hz frequencies. The yellow belt watermelon showing the energy spectral density function at this frequency range to be over 70 seemed to be not a marketable commodity, The energy ratios(0∼550 Hz/850∼2,500 Hz) for the blood flesh watermelon showed the higher value than 3.5.

• 전기학회논문지P
• /
• 제59권4호
• /
• pp.462-466
• /
• 2010

The purpose of this study is to evaluate the safety of a wire connector fabricated for the effective installation of a lighting fixture including its contact resistance, insulation resistance, withstanding voltage characteristics, etc., and to provide the basis for the analysis and judgment of PL(Product Liability) dispute by presenting a damage pattern due to a general flame and overcurrent. This study applied the Korean Standard (KS) for the incombustibility test of the connector using a general flame and performed an overcurrent characteristics test of the connector using PCITS (Primary Current Injection Test System). The contact resistance of the housing connector was measured using a high resistance meter and the insulation resistance was measured using a multimeter. In addition, a supply voltage of AC 1,500V for testing the withstanding voltage characteristics was applied to both ends of the connector. Measurement was performed on 5 specimens and the measured values were used as a basis for judgment. Since the connector is fabricated in the form of a housing, it can be connected and separated easily and has a structure that allows no foreign material to enter. In addition, since it has a structure that allows wires to be connected only when their polarity is identical, any misconnection that may occur during installation can be prevented. When the incombustibility test was performed by applying a general flame to the connector, it showed outstanding incombustibility characteristics and the blade and blade holder connected to the housing remained firmly secured even after the insulation sheath (PVC) was completely destroyed by fire. In addition, the mechanism of the damaged connecting wire showed a comparatively uniform carbonization pattern and it was found that some residual melted insulation material was attached to both ends. In the accelerated life test (ALT) to which approximately 500% of the rated current was applied, the connector damage proceeded in the order of white smoke generation, wire separation, spark occurrence and carbonization. That is, it could be seen that the connector damaged by overcurrent lost its own metallic color with traces of discoloration and carbonization. The contact resistance of the connector at a normal state was 2.164mV/A on average. The contact resistance measured after the high temperature test was 3.258mV/A. In addition, the insulation resistance after the temperature test was completed was greater than $10G\Omega$ and the withstanding voltage test result showed that no insulation breakdown occurred to all specimens showing stable withstanding voltage and insulation resistance characteristics.

• 멤브레인
• /
• 제25권5호
• /
• pp.398-405
• /
• 2015

용액-확산 메커니즘에 의해 결정되는 기존의 고분자에서와는 달리, 촉진수송은 투과도와 선택도를 동시에 향상시킬 수 있는 기술이다. 본 연구에서는 은 나노입자, 폴리비닐피롤리돈, 7,7,8,8-테트라시야노퀴노디메탄으로 구성된 촉진수송 올레핀 분리막에 있어서, 메조기공 티타늄산화물($m-TiO_2$)에 대한 영향을 연구하였다. 특히 메조기공 티타늄산화물은 폴리비닐클로라이드-g-폴리옥시에틸렌 메타크릴레이트 가지형 공중합체를 템플레이트로 하여 쉽고 대량 생산이 가능한 방법으로 제조하였다. 엑스레이 회절분석에 따르면, 제조된 메조기공 티타늄산화물은 아나타제와 루타일 상의 혼합으로 구성되어 있으며, 결정의 크기가 약 16 nm 정도 되었다. 메조기공 티타늄산화물을 첨가하였을 때, 분리막의 확산도가 증가하여 혼합기체 투과도가 1.6에서 16 GPU로 증가하였고 선택도는 45에서 37로 약간 감소하였다. 메조기공 티타늄산화물이 첨가되지 않은 분리막은 장시간 성능이 유지되었으나, 메조기공 티타늄산화물이 첨가된 분리막의 경우 시간이 지남에 따라 투과도와 선택도가 감소하였다. 이는 티타늄산화물과 은 사이의 화학적 상호작용으로 은 나노입자의 올레핀 운반체로써의 활성을 감소시키기 때문으로 사료된다.

• Parasites, Hosts and Diseases
• /
• 제36권1호
• /
• pp.7-14
• /
• 1998

최근 가시아메바 각막염의 치료제로 새롭게 주목을 받고 있는 polyhexamethylene biguanide (PHMB)의 가시아메바에 대한 작용 기전을 알기 위해 각막염 유래 가시아메바 4 분리주에 대한 PHMB의 최저 살충 농도 (minimal cysticidal concentration; MCC)를 결정하고, 이 MCC의 PHMB로 처리한 포낭의 형태학적 변화를 투과전자현미경으로 관찰하였다. PHMB의 8시간과 48시간에 대한 MCC를 결정하였는데, 8시간 MCC는 KA/E1 $14.32{\;}{\mu\textrm{g}}/ml$. KA/E2 $22.45{\;}{\mu\textrm{g}}/ml$, KA/E3 $21.54{\;}{\mu\textrm{g}}/ml$, 및 KA/E4 $23.59{\;} {\mu\textrm{g}}/ml$였다. 48시간 MCC는 KA/El $3.97{\;}{\mu\textrm{g}}/ml$, KA/E2 $7.49{\;}{\mu\textrm{g}}/ml$, KA/E3 $6.40{\;}{\mu\textrm{g}}/ml$ 및 KA/E4 $4.92{\mu\textrm{g}}/ml$로 나타났다. PHMB를 처리한 포낭에서는 포낭 내 amoeb고가 심하게 수축되고 이로 인해 포낭 내벽과 분리되는 형태학적 변화가 관찰되었다. 세포막 아래의 subplasmalemmal lipid droplet의 모양이 불규칙해졌다 심한 경우 세포질이 응집되고. 미토콘드리아의 cristae도 크게 감소하는 등 세포 내 소기관들도 모양이 심하게 변하였다. 포낭 내외벽은 그 형태가 비교적 잘 유지되었다. 이상의 변화들로 볼 때. PHMB는 세포막에 주로 작용하며, 세포 내 소기관들의 막에도 영향을 미치는 것을 알 수 있었다 가시아메바의 세포막의 lipidcomposition은 아직 잘 알려져 있지 않지만 PHMB에 의한 가시아메바 포낭에 대한 살충 효과는 environmental biocide로서 Escherichia col거 세포벽에 있는 acidic prlospholipids에 작용하여 살균 효과를 나타내는 것과 유사한 기전으로 일어날 것으로 사료된다.

• 재활복지공학회논문지
• /
• 제8권2호
• /
• pp.95-99
• /
• 2014

양이간섭은 청신경망에서 청각정보를 처리하는 과정의 하나로, 같은 크기의 소리를 두 귀로 번갈아 자극하여 기록한 청성뇌간유발반응(auditory brainstem responses; ABR)으로 확인할 수 있다. 그러나 소리는 두 귀가 동시에 청취하므로, 양이간섭도 서로 다른 강도의 자극을 두 귀에 동시 자극하여 연구할 필요가 있다. 이 연구 목적은 서로 다른 크기의 소리를 두 귀로 동시에 자극하여 기록한 ABR을 통해 양이간섭치(binaural interaction component; BIC)를 획득하는데 있다. 과거 병력이 없고 청력이 정상인 17.8-22.7세 사이 17명의 여자 대학생이 참여하였다. 소리는 한 귀를 90 dB nHL로 고정하고 반대 쪽 귀를 0부터 80 dB nHL까지 10 dB 단위로 변경시킨 click을 동시에 자극하였다. BI 파형은 양이 동일 강도를 자극한 파형에서 비대칭 자극한 파형을 빼어 구하였다(BI = B - (L + R)). BIC는 BI 파형에서 IV-V 복합파 잠복시간과 진폭으로 하였다. BIC 역치(threshold of BIC; t-BIC)는 자극 강도에 따른 BIC 진폭 변화를 통해 구하였다(대응표본 t-검정). BIC는 자극 음강도 0부터 90 dB nHL까지 10 dB마다 정점 잠복시간 4.65, 4.63, 4.57, 4.58, 4.62, 4.6, 4.48, 4.36, 4.23 ms, 골 잠복시간 5.57, 5.51, 5.51, 5.59, 5.61, 5.55, 5.44, 5.28, 5.19 ms, 진폭 .0.32, -0.3, -0.34, -0.32, -0.42, -0.53, -0.54, -0.61, $-0.67{\mu}V$로, t-BIC는 40 dB nHL(p=.001)로 각각 관찰되었다.

• 지구물리
• /
• 제9권3호
• /
• pp.189-197
• /
• 2006

The Korea Plateau is a continental fragment rifted and partially segmented from the Korean Peninsulaat the initial stage of the opening of the East Sea (Japan Sea). We interpreted marine seismic profiles from the South Korea Plateau in conjunction with swath bathymetric to investigate processes of con-tjnental rifting and separation of the southwestern Japan Arc. The SouU-i Korea Plateau preserves funda-mental elements of rift architecture comprising a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. Two distinguished rift basins (Onnuri and Bandal Basins) in the South Korea Plateau are bounded by major synthetic and smaller antithetic faults, creating wide and symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. Rifting was primarily controlled by normal faulting resulting from extension orthogonal to the inferred line of breakup along the base ofthe slope rather U-ian strike-slip deformation. Two extension direcdons for rifdng are recog-nized; U-ie Onnuri Basin was rifted in U-ie EW direction; U-ie Bandal Basin in U-ie EW and NW-SE directions, suggesting two rift stages. We interpret that the E-W direction represents initial rifting at the inner margin; while the Japan Basin widened, rifting propagated repeatedly from the Japan Basin to the southeast toward the Korean margin but could not penetrate the strong continental lithosphere of the Korean Shield and changed direction to the south, resulting in E-W extension to create the rift basins at the Korean margin. The Hupo Basin to the south of the Korea Plateau is estimated to have formed in this process. The NW-SE direction probably represents the direction of rifting orthogonal to the inferred line of breakup along the base of the slope of the South Korea Plateau; after breakup the southwestern Japan Arc separated in the SE direction, indicating a response to tensional tectonics associated with the subduction of the Pacific Plate in the NE direction. We suggest that structural evolution of the eastern Korean margin can be explained by the processes occurring at the passive continental margin.

• 대한치과교정학회지
• /
• 제52권1호
• /
• pp.3-19
• /
• 2022

Objective: The purpose of this study was to investigate the accuracy of one-step automated orthodontic diagnosis of skeletodental discrepancies using a convolutional neural network (CNN) and lateral cephalogram images with different qualities from nationwide multi-hospitals. Methods: Among 2,174 lateral cephalograms, 1,993 cephalograms from two hospitals were used for training and internal test sets and 181 cephalograms from eight other hospitals were used for an external test set. They were divided into three classification groups according to anteroposterior skeletal discrepancies (Class I, II, and III), vertical skeletal discrepancies (normodivergent, hypodivergent, and hyperdivergent patterns), and vertical dental discrepancies (normal overbite, deep bite, and open bite) as a gold standard. Pre-trained DenseNet-169 was used as a CNN classifier model. Diagnostic performance was evaluated by receiver operating characteristic (ROC) analysis, t-stochastic neighbor embedding (t-SNE), and gradient-weighted class activation mapping (Grad-CAM). Results: In the ROC analysis, the mean area under the curve and the mean accuracy of all classifications were high with both internal and external test sets (all, > 0.89 and > 0.80). In the t-SNE analysis, our model succeeded in creating good separation between three classification groups. Grad-CAM figures showed differences in the location and size of the focus areas between three classification groups in each diagnosis. Conclusions: Since the accuracy of our model was validated with both internal and external test sets, it shows the possible usefulness of a one-step automated orthodontic diagnosis tool using a CNN model. However, it still needs technical improvement in terms of classifying vertical dental discrepancies.

• Animal Bioscience
• /
• 제36권1호
• /
• pp.132-143
• /
• 2023

Objective: The aim was to study the influence of cooling milk at 9℃ at the farm versus keeping it at 20℃ on Parmigiano Reggiano cheese lipolysis. Methods: A total of six cheesemaking trials (3 in winter and 3 in summer) were performed. In each trial, milk was divided continuously into two identical aliquots, one of which was kept at 9℃ (MC9) and the other at 20℃ (MC20). For each trial and milk temperature, vat milk (V-milk) and the resulting 21 month ripened cheese were analysed. Results: Fat and dry matter and fat/casein ratio were lower in MC9 V-milk (p≤0.05) than in MC20. Total bacteria, mesophilic lactic acid and psychrotrophic and lipolytic bacteria showed significant differences (p≤0.05) between the two V-milks. Regarding cheese, fat content resulted lower and crude protein higher (p≤0.05) both in outer (OZ) and in inner zone (IZ) of the MC9 cheese wheels. Concerning total fatty acids, the MC9 OZ had a lower concentration of butyric, capric (p≤0.05) and medium chain fatty acids (p≤0.05), while the MC9 IZ had lower content of butyric (p≤0.05), caproic (p≤0.01) and short chain fatty acids (p≤0.05). The levels of short chain and medium chain free fatty acids (p≤0.05) were lower and that of long chain fatty acids (p≤0.05) was higher in MC9 OZ cheese. The principal component analysis of total and free fatty acids resulted in a clear separation among samples by seasons, whereas slight differences were observed between the two different milk temperatures. Conclusion: Storing milk at 9℃ at the herd affects the chemical composition of Parmigiano Reggiano, with repercussion on lipolysis. However, the changes are not very relevant, and since the cheese can present a high variability among the different cheese factories, such changes should be considered within the "normal variations" of Parmigiano Reggiano chemical characteristics.