• 대한환경공학회지
• /
• 제28권5호
• /
• pp.501-510
• /
• 2006

교대로 간헐적으로 포기되는 2개의 부직포 여과막 생물반응조로 폐수를 처리할 때 반응조의 MLSS 농도와 유입수의 C/N 비가 질소 제거효율에 미치는 영향을 파악하기 위하여 MLSS 농도를 약 5,500 mg/L, 10,000 mg/L 및 15,000 mg/L로 유지하면서 $NH_4Cl$을 첨가하여 유입수의 TCOD/TKN 비를 5, 4, 3 및 2로 감소시켰다. 유입수는 음식물 쓰레기 침출수를 COD농도가 약 300 mg/L되도록 희석시킨 것이었다. 실험 결과, 반응조의 F/M 비는 0.112 g COD/g MLSS-day 이하, COD 제거효율은 95% 이상, 그리고 미생물 성장계수($Y_{obs}$) 값은 평균 0.283 g MLSS/g COD로 나타났다. 질산화 효율은 MLSS 농도가 5,500 mg/L이고 유입수의 TCOD/TKN 비가 2인 경우의 90.5%를 제외하고 모두 96% 이상이었다. 탈질효율은 유입수의 TCOD/TKN 비가 감소할수록 악화되었다. MLSS 농도가 5,500 mg/L인 경우에 비하여 10,000 mg/L인 경우에 탈질효율이 평균 10.7% 더 높아, MLSS 농도가 1,000 mg/L 증가함에 따라 평균 2.66 mg N/L의 율로 탈질율이 증가하였다. 그러나, MLSS 농도가 15,000 mg/L로 유지된 경우에는 5,500 mg/L인 경우에 비하여 탈질효율이 평균 4.6%만 더 높아 MLSS 농도가 1,000 mg/L 증가함에 따라 평균 0.75 mg N/L의 율로 탈질율이 증가하였다. 따라서 MLSS 농도와 내생 탈질율 간에 비례관계가 성립되지 않았다. 알칼리도 소모량은 유입수의 TCOD/TKN 비가 5인 경우에 제거된 T-N 1 mg당 평균 3.36 mg으로서 이론값인 3.57 mg에 가까웠으나 유입수의 TCOD/TKN 비가 감소함에 따라 증가하는 경향을 나타내었다.

• 한국환경농학회지
• /
• 제32권4호
• /
• pp.338-342
• /
• 2013

오디균핵병에 대한 친환경농자재 방제효과시험에서 2012년 3월 초 석회유황합제 살포, 4월초 석회보르도액을 살포한 포장에서 미생물 2종과 천연물 4종 혼합제를 교호적으로 처리한 결과 70% 이상의 방제효과를 나타냈으나, 2013년도에는 약제 살포간격을 줄이는 등 더욱 철저히 방제 하였음에도 발병이 극심하여 미생물제 및 천연물합제 모두 17~64% 범위로 전년보다 효과가 저조하였다. 부안의 동일한 시험포장의 동일 조건하에서 지오파네이트메칠 농약을 3회 처리한 대조구에서도 약효가 저조하게 나타났다. 한편 뽕나무이에 대한 천연식물추출물 친환경농자재의 방제효과는 고삼추출물, 데리스추출물, 고삼+데리스+님오일 3개 처리구 모두 방제효과가 88~95% 정도로 우수하게 나타나 천연식물추출물 복합제를 이용 화학농약을 대체할 수 있을 만큼 충분한 방제효과가 확인되어 뽕나무이를 친환경적으로 방제할 수 있는 우수한 시험결과라고 판단되므로 오디 친환경 재배농가에 조속한 기술보급이 요망된다.

• 한국버섯학회지
• /
• 제16권3호
• /
• pp.231-235
• /
• 2018

본 연구에서는 참나무원목을 이용한 영지버섯 재배하우스의 토양의 이화학성조사와 재배지 온도와 같은 영지 관리 특성을 조사하였으며, 초발이 소요일수는 부직포 피복처리 등 처리 별로 차이 없이 12~13일로 나타났으며, 색도조사에서 적색도(a)의 경우 비닐처리 19.5, 관행처리 20.2, 부직포처리 19.5로 나타났으며, 황색도(b)는 비닐처리 12.7, 관행처리 13.3, 부직포처리 12.4로 나타나 처리간 비슷한 경향을 나타내었다. 처리별 생육특성은 관행처리인 무피복 토양의 경우 갓의 길이 145.7 mm, 두께 23.6 mm, 대 길이 73.9 mm, 두께 11.5 mm, 중량은 130 g을 나타내었고, 부직포피복처리에서는 갓의 길이 157mm, 두께 22.3 mm, 대 길이 93.3 mm, 두께 11.9 mm, 중량은 164 g으로 관행처리보다 우수하였다.

• Environmental Engineering Research
• /
• 제23권3호
• /
• pp.330-338
• /
• 2018

This study investigated the possibility of using potassium titanate oxide ($K_2Ti_4O_9$) and acrylic acid-grafted polypropylene fabric (PP-g-AA) as adsorbents capable of removing strontium from aqueous solutions. $K_2Ti_4O_9$ showed the highest rate of strontium removal in the weak alkaline range, while the PP-g-AA increased strontium removal in the neutral range. Moreover, the adsorption capacity of the $K_2Ti_4O_9$ was not affected by the coexistence of K and Na ions, while the adsorption capacity decreased when Ca and Mg ions were present at the same concentration as that of strontium. When coexisted at the same concentration as strontium, Na, K, Ca, and Mg ions strongly reduced the adsorption capacity of the PP-g-AA. The results also indicated that the adsorption of strontium on $K_2Ti_4O_9$ was consistent with both the Langmuir and Freundlich adsorption isotherms. In contrast, the adsorption of strontium on the PP-g-AA was more consistent with the Langmuir isotherm model. Moreover, the adsorption equilibrium time of $K_2Ti_4O_9$ was generally 12 h, while that of the PP-g-AA was 5 h, indicating that the adsorption rates were consistent with the pseudo-second order kinetics model. $K_2Ti_4O_9$ and the PP-g-AA could be regenerated by simple washing with 0.5 N HCl.

• 한국입자에어로졸학회지
• /
• 제6권4호
• /
• pp.173-183
• /
• 2010

The high temperature pleated filter bags which were used during this study were made of pleated nonwoven fabric of heat and acid resistant polysulfonate fibers which can withstand the heat up to $300^{\circ}C$ and have a filtration area which is 3 to 5 times larger than the conventional round filter bags. Cartridge module packed with 3 kind of the sulfur impregnated activated-carbon based sorbents were inserted in the inner of the pleated filter bag. This type of pleated filter bag was designed to remove not only the particulate matter but also the gaseous elemental mercury. The electrostatic precipitator part can enhance the particulate removal efficiency and reduce the pressure drop of the pleated filter bag by agglomerated particles to form a more porous dust layer on the surface of the pleated bag which is increased the filter bag cleaning efficiency. In addition, the most of particles are separated from the flue gas stream through the cyclone and the electrostatic precipitator part which were installed at the lower part and main body part of the convergence particulate collector, respectively. Thus reduce particulate loading of the high temperature pleated filter bags were applied in this study to analyze the removal characteristics of particulate matter and gaseous elemental mercury.

• 한국의류학회지
• /
• 제5권2호
• /
• pp.35-40
• /
• 1981

This study aims at finding appropriate adhesive conditions with special regard the material of 'fusible padding cloth inter ling' was frequently used for leather. As for leather material, pig suede, sheep suede were selected and drum dyed, cow split, napa have also been used. Mixed spinning non-woven fabric (polyester $50\%$, nylon $50\%$) were used as for padding cloth. Experimental appearance has been observed under the following adhesive conditions: Temperature of press were devided four levers; $120^{\circ}C$, $130^{\circ}C$, $140^{\circ}C$, $150^{\circ}C$, respectively. Adhesive time has been limited 5, 10, 15 second each. And the pressure has been conditioned as $0.2kg/cm^2$ continuously. After all this experiment, it was discovered that the material which had long contact with low temperature conditions has similar adhesive power to material that has short contact with high temperature conditions. There is a great difference according to the leather's dying process, the finishing method of the cloth, and the part of leather surface. The best condition for suede are $140^{\circ}C$, $150^{\circ}C$, at 10 seconds. and for D/D, NAPA, $130^{\circ}C$, at 10 seconds. Although the conditions of $150^{\circ}C$, at 15 seconds was possible for split, the process time can be shortened according to the increase of temperature.

• 멤브레인
• /
• 제9권1호
• /
• pp.51-62
• /
• 1999

본 연구는 투과증발법을 이용한 미량의 휘발성 유기용제 회수에 관한 것으로서 polydimethylsiloxane (PDMS) 균질막을 이용하여 혼합물의 농도, 막의 두께에 따른 투과 특성을 살펴보고, 이에 따라 용해-확산 모델을 이용하여 해석하였다. PDMS 균질막을 통한 MEK , 톨루엔 혼합수용액의 투과실험에서 각 물질의 선택도는 공급액의 농도와 다른 물질의 농도에 상관없이 일정한 값을 나타내었으며, 투과유량도 공급액 농도와 선형의 비례관계을 보였다. 따라서 본 연구에서 각 물질간의 간섭효과는 나타나지 않았다. 균질막의 두께를 변화시키며 행한 투과 실험에서 막 두께에 다른 선택도의 변화는 관철되지 않았다. 이에 따라서 용해-확산모델을 이용하여 각 물질의 PDMS막에 대한 투과계수를 구하였다. 막의 기능성과 실용성을 향상시키기 위한 복합막을 제조하여 행한 투과 실험을 한 결과 PEG 처리한 부직포위에 PDMS를 도포한 막이 선택도나 용질투과유량면에서 가장 우수한 성능을 보였다.

• 한국의류학회지
• /
• 제45권4호
• /
• pp.598-611
• /
• 2021

The purpose of this study was to investigate the necessary functions and areas of improvement in bras worn by patients during the initial three-month recovery period after a breast augmentation procedure, and a functional bra that fits properly was designed. In order to analyze the necessary functions, a bra was designed after relevant discussions with medical staff and patients who underwent breast augmentation surgeries and considering the advice from bra designers and clothing and textile experts. This bra was designed to protect the surgical scars and minimize the compression by inserting a nonwoven fabric into the shoulder and front parts. In addition, it was designed in a way that could fit the individual breast volume by using a mesh material partially on the upper side of the molded cups. Underwires that could support the breasts were inserted, and a detachable wire was used to suit the patient's needs and the diagnosis by the medical staff. As the bra designed in this study received excellent scores during the evaluation by research subjects and experts, it can be used for designing the prototype of a functional bra.

• 근관절건강학회지
• /
• 제30권3호
• /
• pp.263-272
• /
• 2023

Purpose: The aim of this study was to provide a scientific basis for shelf life and re-establish the shelf life in a hospital environment by investigating the validity periods of various packaging materials. Methods: We selected six departments to store sterilized items, prepared 482 sterilized items, and stored them for 12 months. Each sample was tested using a microbiological culture in the laboratory every two weeks. When the result was positive, the sample was considered contaminated. The temperature and relative humidity were measured using an automatic control system to investigate the storage environment during the study period. Results: Except for two samples, which were positive in the 22nd and 28th weeks, 480 samples were negative. The temperature and relative humidity of the sample storage area were measured every week. The annual average temperature was 23.6±1.6℃, and the mean relative humidity was 35.1±15.2%. The cabinets used in this study were the two-open and four-closed types. Conclusion: This study confirmed the validity of the expiration date in a hospital environment. Based on the results, the nonwoven fabric remained sterile for more than nine months. No case of contamination of the paper-plastic pouch packaging was observed, owing to the microbial culture for two months.

• 한국염색가공학회지
• /
• 제35권3호
• /
• pp.179-187
• /
• 2023

In this study, we developed a microfiber-based flexible pressure sensor with high sensitivity and excellent skin breathability. A nonwoven fabric composed of microfibers was prepared by electrospinning, which resulted in excellent moisture permeability of the sensor (143 g∙m^-2∙h^-1). In particular, high-pressure sensitivity (0.36 kPa^-1) was achieved by introducing submicron structures on the microfiber surface by controlling the ambient humidity during electrospinning. The fabrication technology of the microfiber-based flexible pressure sensors reported in this study is expected to contribute to the commercialization of flexible pressure sensors applicable to long-term wearable health monitoring as well as virtual/augmented reality and electronic skin applications.