• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.4
• /
• pp.13-20
• /
• 2014

In this paper, the effects of a nonionic surfactant on the etch uniformity and the etch profile during the wet-etching process of high-purity aluminum were investigated for the fabrication of uniform micropattern arrays. To improve the surface roughness of a high-purity aluminum plate, a mechanical lapping process and an electrolytic polishing process were used. After electrolytic polishing process, the surface roughness, Ra, of the high-purity aluminum plate was improved from $1.25{\mu}m$ to $0.02{\mu}m$. A photoresist was used as an etching mask during the aluminum etching process, where the mixture of phosphoric acid, acetic acid, nitric acid, a nonionic surfactant and water was used as the aluminum etchant. Different amounts of the Triton X-100 nonionic surfactant were added to the aluminum etchant to investigate the effect of a nonionic surfactant during the wet-etching process of high-purity aluminum. The etch rate and the etch profile were measured by an optical interferometer and a scanning electron microscope.

• Journal of the Korean Chemical Society
• /
• v.47 no.1
• /
• pp.19-25
• /
• 2003

A spectrophotometric method for the simultaneous determination of anionic and nonionic surfactant based on the application of multivariate calibration method such as principal component regression(PCR) and partial least squares(PLS) has been studied. The calibration models in PCR and PLS were obtained from the spectral data in the range of 400~700 nm for each standard of a calibration set of 26 standards, each containing different amounts of two surfactants. The relative standard error of prediction(RSEP$_{\alpha}$) was obtained to assess the model goodness in quantifying each analyte in a 5 validation samples which containing different amounts of two surfactants.

• Archives of Pharmacal Research
• /
• v.15 no.2
• /
• pp.126-129
• /
• 1992

The critical micelle concentrations (CMCs) of aqueous solutions of a nonionic surfactant, polyoxyl 23 lauryl ether in the presence of various concentration of urea and its derivatives were measured. The CMC of the surfactant increase in proportion to the concentration of the additives, and the CMC-raising activities increased with more and longer alkyl grups substituted in urea. The CMC shift values were successfully correlated with the cloud point shift values and the protein-denaturing activities of the additives, respectively. These results suggest that the micelle formation, clouding of the surfactant and the protein denaturation are a closely related phenomenon, and a common mechanism is operating which might be the hydrophobic interaction.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.26 no.1
• /
• pp.213-232
• /
• 2000

Cetostearyl alcohol has been incorporated into cosmetic or pharmaceutial emulsions to give them an appropriate consistency and a long term stability. It is well known that cetostearyl alcohol forms a gel phase with a nonionic surfactant in an aqueous system, and the properties of the gel phase depend on several factors such as the ratio of fatty alcohols. The aim of the present Paper is to investigate the effect of the structural difference of the lipophilic part of surfactants on the stability of the gel phase in the nonionic surfactant / cetostearyl alcohol / water ternary systems using differential scanning calorimeter. It is concluded that the gel phase formed by the surfactant having the bended alkyl chain is more unstable than that formed by the case of the straight alkyl chain, and we discussed the reason why the former is more unstable after long term storage by means of the measurements of the ${\Delta}$H.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.166-169
• /
• 2003

In this study, we evaluated the characteristics by the addition of 3 different kinds of nonionic surfactant to improve the dispersion stability of slurries. Slurry stability is an issue in any industry in which settling of particles can result in poor performance. So we observed the variation of particle size and settling rate when the concentration and addition time of surfactant are changed. When the surfactant is added after milling process, the particle size and pH became low. It is supposed that the particle agglomeration was disturbed by adsorption of surfactant on alumina abrasive. The settling rate was relatively stable when nonionic surfactant is added about 0.1~1.0 wt%. When molecular weight(MW) is too small like Brij 35, it was appeared low effect on dispersion stability. Because it can't prevent coagulation and subsequent settling with too small MW. The proper quality of MW for slurry stability was presented about 500,000. Consequently, the addition of nonionic surfactant to alumina slurry has been shown to have very good effect on slurry stabilization. If we apply this results to copper CMP process, it is thought that we will be able to obtain better yield.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4261-4264
• /
• 2012

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.143-149
• /
• 2009

In this study, asphalt emulsion was manufactured by phase inversion emulsification method with nonionic surfactants(Span 80, Span 60, Tween 80, and Tween 60), anionic surfactant(SLS) and cationic surfactant(Imidazole) in different feeding ratio to make up for the week points of asphalt. Its stabilization was carefully investigated with respect to droplet size, viscosity, zeta potential, and water-proofing property. When the surfactants mixed with nonionic and anionic surfactant were used into the asphalt, a stabilization of the asphalt emulsion was good. As the amount of the mixed surfactant was increased, the droplet size of asphalt emulsion were decreased, while the viscosity and zeta potential were increased. When the surfactants mixed with nonionic and anionic surfactant were used into the asphalt, a stabilization of asphalt emulsion was good.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.8
• /
• pp.1444-1452
• /
• 2001

Textile materials are frequently in contact with surfactant solutions during their manufacturing or finishing processes as well as cleaning processes in use. Liquid wetting, wicking and absorbency of textile materials, and the liquid properties, surface characteristics and pore geometry of textile materials, and the liquie-solid interactions, In this paper, 10 different nonionic surfactants, including Span 20, Twen 20, 40, 60, 80, 21, 61, 81, 65, 85, were used. The surfactants were characterized by their hydrophile-lipophile-balance (HLB) values, structures, and surface tensions. The 0.1g/dL and 1.0g/dL surfactant solutions, which were both above critical micelle concentration (CMC), were used to see the concentration effects on the wetting and absorbency of cotton fabrics. The wetting behavior and liquid retention properties of hydrophobic cotton fabrics with different nonionic surfactant solutions are reported. The contact angles are greatly decreased and the water retention values are greatly increased by adding most of the surfactants studied into the system. The extents of this effects are influenced by the characteristics of surfactants and its solutions. Hydrophilic surfactants which have low number of carbon atoms or unsaturated hydrophobe structures are more effective in improving the wetting and absorbancy of hydrophobic cotton fabrics. The water retention of hydrophobic cotton fabrics has positive relations with $cos{\theta}$, adhesion tension and work of adhesion. The 1.0g/dL surfactant solutions show similar, but slightly improved wetting and absorbency characteristics of hydrophobic cotton fabrics compared to the 0.1g/dL surfactant solutions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.348-354
• /
• 1994

The changes of surface activities in the aquaous solutions of mixed surfactants composed of linear sodium dodecylbenznesulfoate (LAS), polyoxyethylene nonyl phenylether (PE, EO=10) and polyethylene glycol monolauryl ether (LE, EO=25) have been studied. Addition of nonionic surfactants to LAS reduces the surface tension, especially at the lower concentration than cmc. The interfacial tension of olive oil/LAS was lower than the other surfactant solutions. The removal of triolein from cotton fabrics by nonionic surfactants and mixtures is higher than by LAS. The addition of NaCI to surfactant solutions even though reduces surface tension smaller but enthances oil removal more than that of $CaCl_2$.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.5
• /
• pp.308-311
• /
• 1988

The hydrophobic interaction occurring between rhodamine 6G and tetraphenylborate was investigated spectroscopically by varying the medium with the addition of surfactants or ethanol. The ion aggregates formed between the two ions were destroyed by the additives. The dye existed as monomeric species in the presence of a cationic surfactant whereas it was incorporated with anionic and nonionic surfactants. For the complete dissociation more than the critical micelle concentration (cmc) was required with a nonionic surfactant while less than cmc was necessary with the others.