• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.77-82
• /
• 1989

DC potential drop(DCPD) measurement system was made and the optimum measuring conditions have been studied. The room temperature resistivity of commercially available medium carbon steel(S45C) was measured using this technique. DCPD was measured in the specimens which were hardened and tempered at different temperatures. It was found that DCPD reflected the change of the microstructure during tempering very sensitively. It was possible to monitor the stage of tempering of S45C steel nondestructively using DCPD measurement.

• 비파괴검사학회지
• /
• 제21권1호
• /
• pp.1-21
• /
• 2001

It will be shown how models can simulate all the elements of an ultrasonic NDE measurement system, including the pulser/receiver, cabling, transducer(s), and the acoustic/elastic waves fields. When combined, these models form what is called the electroacoustic measurement model. It will be demonstrated how this electroacoustic measurement model can be used to conduct parametric transducer and system studies and how the model can form the basis for experimentally characterizing all the elements of the ultrasonic measurement system, using purely electrical measurements.

• 비파괴검사학회지
• /
• 제33권1호
• /
• pp.96-101
• /
• 2013

• 비파괴검사학회지
• /
• 제22권1호
• /
• pp.74-87
• /
• 2002

• 비파괴검사학회지
• /
• 제36권2호
• /
• pp.138-148
• /
• 2016

Measurement of elastic constants is crucial for engineering aspects of predicting the behavior of materials under load as well as structural health monitoring of material degradation. Ultrasonic velocity measurement for material properties has been broadly used as a nondestructive evaluation method for material characterization. In particular, pulse-echo method has been extensively utilized as it is not only simple but also effective when only one side of the inspected objects is accessible. However, the conventional technique in this approach measures longitudinal and shear waves individually to obtain their velocities. This produces a set of two data for each measurement. This paper proposes a simultaneous sensing system of longitudinal waves and shear waves for elastic constant measurement. The proposed system senses both these waves simultaneously as a single overlapped signal, which is then analyzed to calculate both the ultrasonic velocities for obtaining elastic constants. Therefore, this system requires just half the number of data to obtain elastic constants compared to the conventional individual measurement. The results of the proposed simultaneous measurement had smaller standard deviations than those in the individual measurement. These results validate that the proposed approach improves the efficiency and reliability of ultrasonic elastic constant measurement by reducing the complexity of the measurement system, its operating procedures, and the number of data.

• 비파괴검사학회지
• /
• 제21권6호
• /
• pp.642-649
• /
• 2001

정밀부품이나 기기는 개발과정이나 완료단계에서 부적절한 설계에 의하여 발생할지도 모르는 잠재적인 결함을 방지하기 위하여 시험평가를 실시하게 된다. 본 논문에서는 신뢰성 기술 분야의 기초가 되는 환경시험기술을 소개하였으며 엔코더, 교통신호제어기, 계측기기 및 위성항법 수신기 등 제품단위의 대상품에 대한 시험조건 및 방법 등을 기술하고 시험사례를 보고하였다. 이러한 사례를 통하여 제품의 신뢰성 향상을 위한 복합환경시험의 중요성을 강조하였고 최근 환경시험기술에 대한 인식이 날로 증대되면서 시험기술자 양성, 지그설계기술 그리고 고장해석 및 대책기술의 확보가 매우 필요함을 제안하였다.

• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.7-14
• /
• 2008

• 비파괴검사학회지
• /
• 제33권5호
• /
• pp.479-486
• /
• 2013

• 비파괴검사학회지
• /
• 제7권2호
• /
• pp.48-51
• /
• 1988

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.90-97
• /
• 1989

Austempered ductile cast iron (ADI) which has been recently developed shows good mechanical properties. These properties are related to the microstructure which is greatly affected by processing variables such as austempering time and temperature. In this study, the relationships between mechanical properties from impact test, and hardness test and the results from ultrasonic velocity measurement and electrical resistivity measurement are studied on the ADI samples which are heattreated at different austempering temperature and time. From the results, we conclude the followings. The ultrasonic velocity measurement could be used for the study of austempering reaction mechanism. The electrical resistivity measurement could be used as quality assurance technique for the ADI.