• 한국해양공학회지
• /
• 제2권1호
• /
• pp.125-134
• /
• 1988

The feasibility for improving the cooling rates and mechanical properties of wet welding process is experimentally investigated by using new developed underwater wet electrodes and H.T. steel plates. Main results of this experimental study can be summarized as follows; 1) By shielding around weld arc surrounding, the cooling rates resulting from wet welds with developed electrodes on TMCP steel plates can be lower than of non-shielded wet welds. 2)A high quality of mechanical properties of wet welds on TMCP steel plates can be obtained with shielded weld arc surrounding.

• 말소리와 음성과학
• /
• 제10권4호
• /
• pp.147-154
• /
• 2018

Wet voice quality (WVQ) is a characteristic that appears after swallowing. Although the concept is accepted by many clinicians worldwide, it is nevertheless ambiguous. In this study, we investigated WVQ in patients with swallowing disorders using acoustic analysis. A total of 106 patients diagnosed with penetration-aspiration by the videofluoroscopic swallowing study (VFSS) were recruited. A voice recording of vowel /a/ was conducted before and after the VFSS, and an acoustic analysis was then performed using PRAAT. Voice after VFSS was used for a perceptual judgment and divided into two groups: the Wet group (48 patients) and the Non-wet group (58 patients). At the post-VFSS stage, the two groups displayed significant differences in many acoustic parameters including F0_SD, Jitter, RAP, Shimmer, APQ, HNR, NHR, FUF, DVB, and CPP. The parameter affecting judging wetness resulted into Jitter and NHR by the logistic regression test. At the pre-VFSS stage, the two groups differed significantly in many acoustic parameters including Intensity, Jitter, RAP, Shimmer, NHR, FUF, DVB, and CPP. Both pre-and post-VFSS, the mean values of all significant parameters, except Intensity, HNR, and CPP, were higher in the Wet group. According to pre-and post-VFSS, the two groups displayed interactions in many parameters (Intensity, F0_SD, Jitter, RAP, Shimmer, APQ, HNR, NHR, FUF, DVB, and CPP). In particular, Intensity increased in both groups after the VFSS, although the increase in the Non-wet group was greater. Based on these results, it was conjectured that the WVQ after swallowing resulted from the secretion effect of the mucous membrane due to the dry laryngeal characteristic of elderly patients, rather than aspiration resulting in food on the vocal cords.

• Computers and Concrete
• /
• 제32권4호
• /
• pp.411-423
• /
• 2023

The rapid development of road transport has increased the number of bridges that require widening. A critical issue in the construction of bridge widening is the influence of vibrations of the old bridge on the casting of wet joint concrete between the old and new bridges owing to the running traffic. Typically, the bridge is closed to traffic during the pouring of wet joint concrete, which negatively affects the existing transportation network. In this study, a newly developed microscopic traffic load modeling approach and the vehicle-bridge interaction theory are incorporated to develop a refined numerical framework for the analysis of random traffic-bridge coupled dynamics. This framework was used to investigate traffic-induced vibrations at the wet joint of a widened bridge. Based on an experimental study on the vibration resistance of wet joint concrete, traffic control strategies were proposed to ensure the construction performance of cast-in-site wet joint concrete under random traffic without interruption. The results show that the vibration displacement and frequency of the old bridge, estimated by the proposed framework, were comparable with those obtained from field measurements. Based on the target peak particle velocity and vibration amplitude of the wet joint concrete, it was found that traffic control measures, such as limiting vehicle gross weight and limiting traffic volume by closing an additional traffic lane, could ensure the construction performance of the wet joint concrete.

• 보건의료산업학회지
• /
• 제11권4호
• /
• pp.203-211
• /
• 2017

Objectives : This study aims to design a method for drying forceps jars. As part of the process, holes were made in the forceps jars. Drying time, rate of wet pack, and cost of rewashing linen were then determined. Moreover, the study looked into the bacteria incidence rate in the forceps jars. This study suggests a practical way for preventing infection in a hospital through a surgical device. Methods : This study investigated the effect of forceps jars with holes on reducing drying time, rate of wet pack, and cost of rewashing linen. It also looked into the bacteria incidence rate in the forceps jars through a parallel design. Data was collected and analyzed using SPSS version 21. Results : The drying time of a forceps jars was remarkably reduced from $18.44{\pm}0.2$ minutes(non-hole forceps jars) to $0.58{\pm}0.02$ minutes(4-hole forceps jars). The rate of wet pack of non-hole forceps jars was 51.4%. However, the rate of 4-hole forceps jars reached 4.6%. The cost of rewashing linen saw a decline from 38,073 won to 3,381 won. In addition, no bacteria and virus were detected from the 24-hours usage of forceps jars even though the jars had holes. Conclusions : The 4-hole forceps jars greatly increased work efficiency as a result of the reduced drying time, rate of wet-pack and cost of rewashing linen. The 4-hole forceps jars did not influence their sterilizing effect.

• 한방재활의학과학회지
• /
• 제28권4호
• /
• pp.21-32
• /
• 2018

Objectives This study was designed to investigate the effects of wet cupping on Wisu (BL12) in non-acute low back pain patients. Methods We recruited 30 participants for this study. Fifteen patients were randomly assigned to the Wisu (BL21) treatment group (WT group) and 15 were assigned to the non-acupoint treatment group (NT group). Both groups were treated with the pricking-cupping bloodletting method three times. Values at baseline and follow-up were analyzed by Wilcoxon signed rank test and the differences between the two groups were determined by Wilcoxon rank sum test. p-values less than 0.05 were considered significant. The primary outcome was the visual analogue scale (VAS), and secondary outcomes were the Oswestry disability index (ODI), Rolland-Morris disability questionnaire (RMDQ), Euroqol-5 dimension questionnaire (EQ-5D) and finger-to-ground distance (FTGD). These outcomes were measured on the day of first treatment before the procedure and on follow-up 7 days after the last treatment. Results Significant changes were identified in the VAS for pain and ODI in each group after wet cupping treatment on Wisu (p<0.05). However, no significant changes were found between groups. Meanwhile, RMDQ and EQ-5D were significantly decreased only in the NT group (p<0.05) without any differences between groups. FTGD was decreased in both groups, but not significantly. Conclusions Wet cupping with both Wisu treatment and non-acupoint had significant effects on non-acute low back pain, although there were no differences between the two groups. A large-scale study is needed to identify the effect of wet cupping on Wisu.

• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.149-158
• /
• 2002

Recently, the minimum line width shows a tendency to decrease and the multi-level increases in semiconductor. Therefore, a planarization technique is needed and chemical mechanical polishing(CMP) is considered as one of the most suitable process. CMP accomplishes a high polishing performance and a global planarization of high quality. However there are several defects in CMF, such as micro-scratches, abrasive contaminations and non-uniformity of polished wafer edges. Wet etching process including spin-etching can eliminate the defects of CMP. It uses abrasive-free chemical solution instead of slurry. On this study, ILD(Interlayer-Dielectric) was removed by CMP and wet etching process using DHF(Diluted HF) in order to investigate the possibility of planrization by wet etching mechanism. In the thin film wafer, the results were evaluated from the viewpoint of material removal rate(MRR) and within wafer non-uniformity(WIWNU). And the pattern step heights were also compared for the purpose of planarity characterization of the patterned wafer. Moreover, Chemical polishing process which is the wet etching process with mechanical energy was introduced and evaluated for examining the characteristics of planarization.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.665-670
• /
• 2001

The purpose of this study is to develop a new type dryer, which is to proceed mixing and drying of wet-materials at the same time and drying process is carried out in a closed system. In this drying system, thermal contact occurs, when a fluidized zone is created by paddle mechanism. Accordingly, wet-materials is dried in a short time without any damage. Also wet-materials could be dried uniformly to low moisture contents. It is suitable to dry a small quantity of multi-kind materials. And drying process is carried out in a closed system, so as for environmental pollution dust not to be emitted into the atmosphere. Accordingly, it could be used to dry not only food and chemical materials, but also environmental pollution materials.

• 한국습지학회지
• /
• 제23권4호
• /
• pp.372-380
• /
• 2021

비점오염물질 및 고농도 가축분뇨는 수계 및 습지 수질 악화의 주요 원인으로 보고되고 있으며, 이를 관리하기 위한 방안으로 저영향개발기술 (Low Impact Development, LID)에 대한 관심이 증가하고 있다. 인공습지는 다양한 오염물질 저감 기작을 기반으로 가축 사육 농업지역 내 비점오염원 관리 방안으로 제시되고 있다. 이에 본 연구에서는 전라북도 J시 내 경작지 및 가축 사육 지역을 대상으로 현장 모니터링 및 모델링을 기반으로 인공습지의 적용성 평가를 실시하였다. 연구대상 지역의 강우 시 유량가중평균농도(Event Mean Concentration, EMC) 농도는 건기 시와 비교하여 BOD 기준 약 27배 이상 높은 것으로 나타나 비점오염원 관리가 시급한 지역으로 나타났다. 모델링 기반의 인공습지 저감 효율은 BOD 57.5%, TN 48.9% 그리고 TP 64.2%를 보였다. 하지만, 다량의 강우유출수가 발생하는 시점과 동절기에는 다소 효율이 감소하는 경향을 보여 해당 시기 인공습지 운영에 관리가 필요할 것으로 판단된다. 마지막으로 본 연구 결과는 인공습지가 가축 사육 농업지역 내 안정적인 비점오염원 관리가 가능한 대안으로 제안될 수 있는 것을 보여준다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권6호
• /
• pp.708-718
• /
• 2010

The objective of the current study was to determine seasonal changes in glucose, cholesterol, non-esterified fatty acids (NEFA), serum inorganic phosphorous (SIP), calcium, magnesium and iron concentrations in Nguni and crossbred cattle on the sweet and sour rangelands of the Eastern Cape Province of South Africa. Body weights, body condition scores (BCS) and serum concentrations of energy-related metabolites and mineral profiles were determined in late cool-dry, hot-dry, hot-wet, post-rainy and early cool-dry seasons in 100 cattle raised on communal rangelands from August 2007 to May 2008. Nguni cattle had lower (p<0.05) and higher (p<0.05) serum concentrations of glucose in the hot-wet and post-rainy seasons, respectively, compared to crossbreds in the same seasons. Serum cholesterol and NEFA concentrations in Nguni were lower (p<0.05) than in the crossbreds. Nguni and crossbred cattle had higher (p<0.05) serum NEFA concentrations on the sweet rangeland during the late cool-dry season than on sour rangeland. Nguni cattle had higher (p<0.05) SIP concentration in the hot-wet season than the crossbreds. Generally, both breeds had lowest SIP concentration during the hot-wet season on the sour rangeland. The lowest magnesium and highest iron concentrations were observed in the hot-wet and post-rainy seasons, respectively, compared to other seasons. Cattle on the sour rangeland had lower (p<0.05) iron concentrations than those on the sweet rangeland. It was concluded that Nguni cattle had lower cholesterol and NEFA, and higher SIP concentrations in the hot-wet season than crossbreds and energy deficits mostly occurred during the late cool-dry season on the sweet rangeland.

• 한국물환경학회지
• /
• 제28권2호
• /
• pp.320-331
• /
• 2012

A combination system of catch canal and constructed wetland was designed and suggested to improve water quality in gagricultural region of lower Dong-jin river basin. In order to evaluate an water quality improvement efficiency of the designed combination system, the NPS-WET model was applied in this study. Simulation result of the NPS-WET shown that the nutrient load removal rate of constructed wetland was BOD, T-N, T-P and SS was 30.7~39.0%, 46~60%, 40.7~57.0% and 68.2~74.7%, respectively. Nutrients reduction of constructed wetland was higher in growing season than winter season because vital activity of microorganism, macrophyte and algae was augmented with high air and water temperature. Effluents from constructed wetland can affect water-quality of catch canal drains, especially, water-quality on junction point to Dong-jin river. Water-quality improvement in low-flowed catch canal (Un-san) was more significant than in high-flowed catch canal (Won-pyeong). In conclusion, a feasible design of constructed wetland is necessary to treat large quantity of receiving water. The NPS-WET is useful tool for assessing water-quality improvement efficiency using constructed wetland.