• 한국식품과학회지
• /
• 제22권6호
• /
• pp.675-680
• /
• 1990

관능검사에 의존하여 오던 종래의 고추 품질평가법을 탈피하여 매운맛 성분인 capsaicin, 적색색소인 capsanthin, total sugar 및 수분함량을 근적외 분광분석법으로 화학약품을 사용하지 않고 신속, 정확하게, 동시에 측정 할 수 있는 방법을 조사하였다. 기존의 화학분석 방법에 의해 측정한 상기 성분들의 함량치와 근적외 스펙트럼 데이타간에 중회귀분석을 행하여 각각의 성분측정을 위한 검량식을 작성하였다. 이들 검량식을 미지의 고추시료에 적용시켜 구한 분석치와 기존 분석법으로 구한 분석치를 비교한 결과, capsanthin과 total sugar는 근적외 분광분석법에 의해 정량적으로 측정할 수 있음을 알 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.99.1-99.1
• /
• 2012

The thin-film photovoltaic absorbers (CdTe and $Cu(In,Ga)Se_2$) can achieve solar conversion efficiencies of up to 20% and are now commercially available, but the presence of toxic (Cd,Se) and expensive elemental components (In, Te) is a real issue as the demand for photovoltaics rapidly increases. To overcome these limitations, there has been substantial interest in developing viable alternative materials, such as $Cu_2ZnSnS_4$ (CZTS) is an emerging solar absorber that is structurally similar to CIGS, but contains only earth abundant, non-toxic elements and has a near optimal direct band gap energy of 1.4 - 1.6 eV and a large absorption coefficient of ~104 $cm^{-1}$. The CZTS absorber layers are grown and investigated by various fabrication methods, such as thermal evaporation, e-beam evaporation with a post sulfurization, sputtering, non-vacuum sol-gel, pulsed laser, spray-pyrolysis method and electrodeposition technique. In the present work, we report an alternative aqueous chemical approach based on chemical bath deposition (CBD) method for large area deposition of CZTS thin films. Samples produced by our method were analyzed by scanning electron microscopy, X-ray diffraction, transmission electron microscopy, absorbance and photoluminescence. The results show that this inexpensive and relatively benign process produces thin films of CZTS exhibiting uniform composition, kesterite crystal structure, and some factors like triethanolamine, ammonia, temperature which strongly affect on the morphology of CZTS film.

• 한국축산식품학회지
• /
• 제36권2호
• /
• pp.215-222
• /
• 2016

The combined effects of irradiation and aging temperature on the microbial and chemical quality of beef loin were investigated. The samples were vacuum-packaged, irradiated at 0 or 2 kGy using electron-beam (EB), and stored for 10 d at different aging temperatures (2, 14, or 25℃). The microbial growth, shear values, meat color, and nucleotide-related flavor compounds of the samples were analyzed. The irradiation effect on inactivation of foodborne pathogens was also investigated. The population of Listeria monocytogenes and Escherhia coli O157:H7 inoculated in beef samples decreased in proportion to the irradiation dose. Irradiation reduced the total aerobic bacteria (TAB) over the storage, but higher aging temperature increased the TBA. Thus TAB increased sharply in non-irradiated and high temperature-aged (14, 25℃) beef samples after 5 d. With increasing aging temperature and aging time, shear force values decreased. Lipid oxidation could be reduced by short aging time at low aging temperature. The color a* values of the irradiated beef were lower than those of the non-irradiated throughout the aging period. As aging period and temperature increased, IMP decreased and hypoxanthine increased. Considering microbial and physicochemical properties, irradiation can be used for raw beef to be aged at relatively high temperature to shorten aging time and cost.

• Applied Science and Convergence Technology
• /
• 제23권5호
• /
• pp.248-253
• /
• 2014

Air Gap Membrane Distillation (AGMD) is one of several technologies that can be used to solve problems fresh water availability. AGMD exhibits several advantages, including low conductive heat loss and higher thermal efficiency, due to the presence of an air gap between the membrane and condensation wall. A previous study by Bhardwaj found that the condensation surface properties (materials and contact angle) affected the total collected fresh water in the solar distillation process. However, the process condition differences between solar distillation and AGMD might result in different condensation phenomena. In contrast, N. Miljkovic showed that a hydrophobic surface has higher condensation heat transfer. Moreover, to the best of our knowledge, there is no study that investigates the effect of condensation surface properties in AGMD to overall process performance (i.e. flux and thermal efficiency). Thus, in this study, we treated the AGMD condensation surface to make it hydrophobic or hydrophilic. The condensation surface could be made hydrophilic by immersing and boiling plate in deionized (DI) water, which caused the formation of hydrophilic aluminum hydroxide (AlOOH) nanostructures. Afterwards, the treated plate was coated using hexamethyldisiloxane (HMDSO) through plasma-enhanced chemical vapor deposition (PECVD). The result indicated that condensation surface properties do not affect the permeate flux or thermal efficiency significantly. In general, the permeate flux and thermal efficiency for the treated plates were lower than those of the non-treated plate (pristine). However, at a 1 mm and 3 mm air gap, the treated plate outperformed the non-treated plate (pristine) in terms of permeate flux. Therefore, although surface wettability effect was not significant, it still provided a little influence.

• 한국식품과학회지
• /
• 제41권1호
• /
• pp.32-36
• /
• 2009

농축시킨 Aloe vera gel을 동결건조하였을 때 그 농축도 차이에 의한 최종 건조분말의 물성 변화를 비교분석하였다. 분말의 최종 수분함량은 거의 차이가 없었으며. 점성 측정에서는 높은 농축 조건의 경우 전형적인 shear thinning 현상과 non-Newtonian 유체의 속성을 나타냈다. 이에 비하여 낮은 농축 조건의 경우 Newtonian 액체의 성질과 고형분이 입자가 아닌 풀린 형태로 존재할 때 나타나는 현상을 보였다. 분말이 물에 용해되는 동안 전기전도도의 변화를 실시간으로 측정한 결과 평형상태에 도달하였을 때, 가장 높은 농축 조건에서 전기전도도가 가장 낮게 나타나, 비전해질성 물질의 용해도가 가장 큰 것으로 해석되었다. 분말의 등온흡습성에서는 농축이 증가할수록 수분 흡착과 결합수의 양이 작아지는 것으로 분석되었다. 결과적으로 Aloe vera gel을 농축하여 동결건조할 때는 그 농축도에 따라 점성, 현탁시 전기전도도에 따른 용해성, 등온흡습성이 변하는 것으로 나타나, 특정 품질의 동결건조제품을 얻기 위해서는 그에 대한 농축의 최적화가 필요한 것으로 생각된다.

• 대한금속재료학회지
• /
• 제46권10호
• /
• pp.691-699
• /
• 2008

Electrochemical characteristics of Ti-30Ta-xZr alloys coated with HA/TiN by using magnetron sputtering method were studied. The Ti-30Ta containing Zr(3, 7, 10 and 15wt%) were 10 times melted to improve chemical homogeneity by using a vacuum furnace and then homogenized for 24hrs at $1000^{\circ}C$. The specimens were cut and polished for corrosion test and coating, and then coated with HA/TiN, respectively, by using DC and RF-magnetron sputtering method. The analyses of coated surface and coated layer were carried out by using optical microscope(OM), field emission scanning electron microscope(FE-SEM) and X-ray diffractometer(XRD). The electrochemical characteristics were examined using potentiodynamic (-1,500 mV~ + 2,000 mV) and A.C. impedance spectroscopy(100 kHz ~ 10 mHz) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The microstructure of homogenized Ti-30Ta-xZr alloys showed needle-like structure. In case of homogenized Ti-30Ta-xZr alloys, a-peak was increased with increasing Zr content. The thickness of TiN and HA coated layer showed 400 nm and 100 nm, respectively. The corrosion resistance of HA/TiN-coated Ti-30Ta-xZr alloys were higher than that of the non-coated Ti-30TaxZr alloys, whic hindicate better protective effect. The polarization resistance($R_p$) value of HA/TiN coated Ti-30Ta-xZr alloys showed $8.40{\times}10^5{\Omega}cm^2$ which was higher than that of non-coated Ti-30Ta-xZr alloys.

• 한국산업보건학회지
• /
• 제28권4호
• /
• pp.382-392
• /
• 2018

Objective: Allergic diseases such as asthma due to fungal exposure in houses have increased, and proper management is urgent. Mold can grow in the air, floor, walls, and other areas according to environmental conditions, and there are many limitations to the conventional methodology for examining fungal exposure. For this reason, the degree of fungal contamination is being evaluated by ERMI (Environmental Relative Moldiness Index), a quantitative analysis method proposed by the EPA. In this study, we compared ERMI values between water-damaged dwellings and non-damaged ones to evaluate the effectiveness of Korean ERMI values. We also explored the association of ERMI values with the level of airborne mold and characteristics of dwellings. Methods: Floor dust was collected after installing a Dustream collector on the suction port of a vacuum cleaner. The collected samples were filtered to remove only 5 mg of dust, and DNA was extracted using the FastDNA SPIN KIT protocol. Results: The ERMI values were found to be 19.6 (-6.9-58.8) for flooded houses, 7.5 (-29.2-48.3) for leaks/condensation, and 0.8 (-29.2-37.9) for non-damaged dwellings. The airborne concentration of mold for flooded, leakage or condensed, and non-damaged houses were $684CFU/m^3$, $566CFU/m^3$, and $378CFU/m^3$, respectively. The correlation between ERMI values and the levels of airborne mold was low (R = 0.038), but a weakly significant association of the ERMI values with the concentration of particulate matter ($PM_{10}$) was observed as well(R=0.231,P<0.05). Conclusions: Our findings show that the reference value using ERMI can be used to distinguish water-damaged and non-damaged dwellings. It is believed that ERMI values could be a promising tool for assessing long-term fungal exposure in dwellings.

• 한국진공학회지
• /
• 제15권2호
• /
• pp.201-208
• /
• 2006

전류 차단층으로서 AlAs 자연산화층 ($AlO_x$) 을 갖는 InGaAs 양자점 (quantum dot) 구조를 분자선 박막 성장법 (molecular-beam epitaxy)과 습식 산화법 (wet oxidation)을 이용하여 제작하였고, 이들 구조의 열처리에 따른 광학적인 특성 변화를 photoluminescence (PL), PL excitation, 그리고 공간 분해능을 갖는 micro-PL을 이용하여 분석하였다. 습식 산화와 열처리 과정을 통해 intermixing된 InGaAs 양자점 영역에서 PL 특성을 조사한 결과, intermixing 되지 않은 영역보다 높은 에너지에서 완만한 PL peak이 추가적으로 관측되었다. 산화되지 않은 (non-oxided) AlAs 아래에 있는 InGaAs 양자점 영역에서는 약 1.1 eV에서 PL emission이 주로 관측되었으나, $AlO_x$와 $SiN_x$에 의해 intermixing 된 InGaAs 양자점 영역에서는 각각 약 1.16 eV와 $1.18{\sim}1.20$ eV 에서의 PL emission도 함께 관측되었다. 실험 결과, $AlO_x$층이 있는 InGaAs 양자점 영역이 산화 되지 않은 AlAs층이 있는 영역에 비해서 intermixing 효과가 크게 작용함을 알 수 있었다.

• 청정기술
• /
• 제17권4호
• /
• pp.306-313
• /
• 2011

인쇄회로기판(PCB)과 같은 전자부품을 제조시에 솔더링을 하기 위하여 플럭스나 솔더페이스트를 사용하며 솔더링 후에 부품에 잔류한 플럭스나 솔더페이스트를 제거하여야하는데 이것은 이들 물질이 잔류하였을 경우 부식이나 누전을 초래하여 부품의 성능을 떨어뜨리거나 고장을 일으킬 수 있다. 솔더링 후에 플럭스와 솔더플럭스 잔류물을 제거하기 위하여 오존파괴물질 세정제인 1,1,1-trichloroethane이나 HCFC-141b가 아직까지 많이 사용되고 있다. 본 연구에서는 이들 오존파괴성질을 가진 세정제를 대체하기 위하여 인화점이 존재하지 않는 비수계세정제를 개발하였고 산업현장 적용도 시도해 보았다. 인화점이 존재하지 않는 세정제를 개발하기 위해 탄화수소계 용제를 주 용제로 하고 글리콜에테르계, 에스테르계 및 불소계 용제를 첨가하여 비수계세정제를 배합하였고 이들의 물성 및 세정성을 평가하였다. 그리고 이들 배합세정제 중에 세정력이 뛰어난 세정제를 현장에 적용하여 보았다. 또한 배합된 비수계세정제의 사용후에 재활용 가능성을 평가하기 위하여 감압증류장치를 가동하여 사용 후의 세정제를 재활용시에 요구되는 운전 조건과 재활용율을 구하여 보았다. 배합세정제의 물성 측정 결과 모두 표면장력이 18.0~20.4 dyne/cm으로 비교적 낮았고 습윤지수도 비교적 높아 오염물에 대한 습윤력과 침투력이 우수할 것으로 기대되었고 불소계용제를 첨가하여 배합한 세정제는 인화성이 없음이 확인되어 사용하고 보관하기에 안전하리라 사료된다. 플럭스 및 솔더페이스트 세정 연구 실험 결과 대체목표세정제인 1,1,1-TCE와 HCFC-141b보다 세정력이 우수함을 확인할 수 있었다. 그리고 배합세정제 중에 우수한 세정제를 선정하여 HCFC-141b를 사용하는 산업현장의 PCB 세정에 적용한 결과 HCFC-141b보다 우수한 세정을 나타내어 산업현장에 적용 가능성을 보여 주었다. 또한 이들 제품을 감압증류장치를 이용하여 재활용 가능성을 평가 결과 운전조건 $100{\sim}110^{\circ}C$, 20~30 mbar에서 91.9~97.5%를 재활용할 수 있음을 보여주었다.

• Transactions on Electrical and Electronic Materials
• /
• 제15권5호
• /
• pp.275-278
• /
• 2014

We deposited TiAgN and ZrAgN nanocomposite coatings on pure Titanium specimens, by using arc ion plating (AIP) with single alloy targets. TiAg ZrAg alloy targets of 5 wt.%, 10 wt.% silver content by vacuum arc remelting (VAR), followed by homogenization for 2 hours at $1,100^{\circ}C$ in non-active Ar gas atmosphere and characterized these samples for morphology and chemical composition. We investigated the biocompatibility of TiAg and ZrAg alloys by examining the proliferation of L929 fibroblast cells by MTT test assay, after culturing the cells ($4{\times}10^4cells/cm^2$) for 24 hours; and exploring the antibacterial properties of thin films by culturing Streptococus Mutans (KCTC3065), using paper disk techniques. Our results showed no cytotoxic effects in any of the specimens, but the antibacterial effects against Streptococus Mutans appeared only in the 10 wt.% silver content specimens.