• Journal of ILASS-Korea
• /
• v.11 no.4
• /
• pp.220-227
• /
• 2006

Experimental studies has been conducted to investigate the effect of orifice diameter ratio on the mixing characteristics of the split element of doublet and triplet elements. The spray characteristics of non-reacting immiscible liquids have been investigated using a patternator. The local volume fraction is measured by use of mean value of each component. This volume measurement represents the mixing characteristics of the liquid, which affect the overall combustion efficiency. The ratio of the orifice diameter, ranging from 1 to 1.5, and that of the jet-momentum, ranging from 0.5 to 6.0, we used. The jet impinging behavior with use of various ratios exhibits substantially different mixing characteristics. Mixing efficiency is maximized when the jet-momentum ratio is increased; this behavior is particularly prominent when the orifice diameter ratio is greater than unity. The split of the triplet element yields better mixing characteristics and is more effective than that of the doublet element in regard to achieving high combustion efficiency. The optimum mixing factor for the triplet element is found to be 0.75, according to our measurement.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.265-275
• /
• 2010

The main purpose of this study is to estimate willingness to pay (WTP) by the general publics, assuming that they pay tax or charge for protecting marine living resources and environment through developing and supplying biodegradable fishing nets. This study employed a contingent valuation method (CVM) which is an econometric method. The survey was conducted by using both double-bounded dichotomous choice and open-ended survey. Tobit model was used for the analysis. The variables included concerns about marine environment and fishing net discarded, sex, age profile, number of family members, educational level and personal disposable income. Annual average WTP per family for the biodegradable fishing net development and supply was estimated at 5,294 won and national WTP amounted to some 84.2 billion won. This includes both of use and non-use value of biodegradable fishing nets.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.457-462
• /
• 1995

Unlike the usual bone plate and screw fracture fixation, an improved plate fixation method, which can transfer gradually physiological load to bones, is described. The key feature of the present method is to use washers between the plate and the screw. Bio-absorbable materials or non-ferrous materials with good damping characteristics are used to manufacture the washers. The purpose of this paper is to discuss potential advantages of the proposed method, and to show experimentally its improved impact-absorbing characteristics. Vibration experiments are carried out for pig femurs and cow tibias with and without the proposed washers. This experiments show that the washers can drop the first peak value suite substantially in the FRF plots. Although in-vivo experiments have not been conducted, the present fixation method appears to be a simple and effective alternative to the presently used method.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.421-428
• /
• 2020

The study investigates the causal factors affecting mobile banking services acceptance by customers in Thailand. This study employs quantitative research methodology and non-probability sampling to draw 400 mobile banking users from the population who are the mobile banking users of commercial banks in Thailand. The online questionnaires were used as a research tool to collect data with the Cronbach's alpha coefficient as 0.931. By using the structural equation model to analyze data, the results have shown that service quality, perceived usefulness, perceived ease-of-use, safety in use, and social factors influenced mobile banking services acceptance by customers in Thailand.By checking the harmony with the statistics χ² = 108.618, df. = 86, χ²/df. = 1.263, p-value = .050, CMIN/DF =1.263, GFI = .989, AGFI=.962, TLI= .962, CFI = .976, RMSEA = .037,along with testing the weight factor. In conclusion, the research model was found to be harmonious with the empirical data at the significance level 0.05. The findings of this study suggest that the commercial banks should apply this research to understand the acceptance behavior of mobile banking users, also to determining marketing strategies, identifying opportunities and creating a competitive advantage for their services in the future.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.2
• /
• pp.250-261
• /
• 1999

Based on a set of performance plots relating the design variables to the imposed conditions, an easy-to-use and versatile design procedure for chevron-type multipass plate heat exchangers is developed. In order for the present procedure to cover multipass with unequal passes and non-unity ratio of heat capacity rate, each stream number of transfer unit is adopted as the basic design variable instead of the exchanger number of transfer unit. It is found that there exists a unique relation between the stream and exchanger number of transfer units regardless of the chevron angle and the plate length. In addition, for a given value of the pressure drop the heat transfer area per unit mass flow rate can be expressed in terms of the stream number of transfer unit only. These two relationships in the form of simple plots constitute the framework of design. The sample results in comparison with the available data indicate that the present procedure includes the previous ones as a subset, and that every design method is affected essentially by the selection of specific correlations for the heat transfer coefficient and the friction factor.

• Journal of KIBIM
• /
• v.10 no.3
• /
• pp.12-21
• /
• 2020

From the perspective of the client, the value of information for use in facility management is very low at the point of use. This is because the facility owner, who is a non-professional, cannot accurately request necessary information from the perspective of long-term facility life cycle management. The purpose of this study is to define the information necessary for facility management and to analyze the project operation method to procur this information to the client using BIM. To this end, this study analyzed the role of client and contractor, project delivery process, standards, and submissions in the BIM-based procurement area through USACE Air Force Hospital project case analysis. As a result of the analysis, if the client, who is the subject of facility operation, defines in advance the type and input method of necessary information in the operation stage, the client can receive the BIM optimized for operation from the contractor. The results of this study can be used to establish standards for receiving information necessary for establishment of procurement process and facility management of public institutions considering BIM introduction.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.177-189
• /
• 1998

The contents of this paper include a non-destructive technique for evaluating the degradation of the boiler superheater tube in a fossil power plant through an electrochemical polarization test. Correlation between Ip of polarization parameter and SP-DBTT for the superheater tubes in long-term use was obtained. 1.0Cr-0.5Mo steel was degraded by softening, and the degree of degradation was dependent upon carbides with Cr and Mo elements. Since brittle fracture at low temperature and ductile fracture mode at high temperature were shown, similarity between standard Charpy and small punch tests could be found. In addition, SP-DBTT showing the degree of degradation was higher, as the time-in use of the materials got longer. Electrolyte including picric acid of 1.3 g in distilled water of 100ml at 25.deg. C temperature and sodium tridecylbenzene sulfonate with 1g could be applied to evaluate the degradation of 1.0Cr-0.5Mo steel by means of the electrochemical polarization test. Ip and Ipa values measured through the electrochemical test are the appropriate parameters for representing the degradation of the superheater tube(1.0Cr-0.5Mo steel) for the fossil power plant. It is poassible to evaluate the degradation of materials with different time histories electrochemically, by Ip value only, at field test.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.85-97
• /
• 2019

Today, building constructions are becoming larger, higher, deeper, and complex to improve quality of human life and meet various needs. As a result, new design space for non - typically standardized space has been created, and targets for performance-based design are also becoming increased. An evacuation safety evaluation of performance-based design should be compared with ASET and RSET estimation so that the value of RSET does not exceed the value of ASET. However, there is a problem that it is difficult to secure the safety with using the performance-based design evaluation method currently in use, especially in case of the underground parking lot, because it has wide compartment area and various routes for evacuation. Therefore, in order to overcome these problems, this paper first investigates the simulation setting method of the performance-based design that is currently in use, and then conducts two fire simulations and three evacuation simulations for underground parking lots each time, so performs the evacuation safety evaluationin total six cases of situations. Here this paper analyzes the problem with comparative evaluation research and suggests the better solution for improved evacuation safety evaluation of performance-based design.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.1
• /
• pp.73-85
• /
• 2001

Electronic check schemes are more efficient than electronic coin scheme with respect to computational costs and the amount of information exchanged. In spite of these, difficulties in making a refund reusable and in representing the face value of a check have discouraged its development. In this paper, a new online electronic check system is presented, which solves the above problems. This system uses the partially blind signature to provide user anonymity and to represent the face value of a check. The partially blind signature enables us to make the format of refunds and initially withdrawn checks identical. Thus, it allows refunds to be reused to buy goods without any limitatiosn. Both initially withdrawn checks and refunds in our system guarantee untraceability as well as unlinkability. We also use a one-time secret key as the serial number of a check to increase the efficiency of payments. The presented check system also provides multiple offline shopping sessions to minimize the number of online messages handled by a bank. During the multiple offline shopping session, we use a one-way accumulator to provide non-repudiation service. We also analyze our new systems our new system\`s security, efficiency, and atomicity.

• Journal of Chest Surgery
• /
• v.57 no.3
• /
• pp.302-311
• /
• 2024

Background: Unexpected conversion to thoracotomy during planned video-assisted thoracoscopic surgery (VATS) can lead to poor outcomes and comparatively high morbidity. This study was conducted to assess preoperative risk factors associated with unexpected thoracotomy conversion and to develop a risk scoring model for preoperative use, aimed at identifying patients with an elevated risk of conversion. Methods: A retrospective analysis was conducted of 1,506 patients who underwent surgical resection for non-small cell lung cancer. To evaluate the risk factors, univariate analysis and logistic regression were performed. A risk scoring model was established to predict unexpected thoracotomy conversion during VATS of the lung, based on preoperative factors. To validate the model, an additional cohort of 878 patients was analyzed. Results: Among the potentially significant clinical variables, male sex, previous ipsilateral lung surgery, preoperative detection of calcified lymph nodes, and clinical T stage were identified as independent risk factors for unplanned conversion to thoracotomy. A 6-point risk scoring model was developed to predict conversion based on the assessed risk, with patients categorized into 4 groups. The results indicated an area under the receiver operating characteristic curve of 0.747, with a sensitivity of 80.5%, specificity of 56.4%, positive predictive value of 1.8%, and negative predictive value of 91.0%. When applied to the validation cohort, the model exhibited good predictive accuracy. Conclusion: We successfully developed and validated a risk scoring model for preoperative use that can predict the likelihood of unplanned conversion to thoracotomy during VATS of the lung.