• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.4
• /
• pp.276-280
• /
• 2016

A fixed rate speech coder based on the filter bank and the non-uniform sampling technique is proposed. The non-uniform sampling is achieved by the detection of inflection points (IPs). A speech block is band passed by the filter bank, and the subband signals are processed by the IP detector, and the detected IP patterns are compared with entries of the IP database. For each subband signal, the address of the closest member of the database and the energy of the IP pattern are transmitted through channel. In the receiver, the decoder recovers the subband signals using the received addresses and the energy information, and reconstructs the speech via the filter bank summation. As results, the coder shows fixed data rate contrary to the existing speech coders based on the non-uniform sampling. Through computer simulation, the usefulness of the proposed technique is confirmed. The signal-to-noise ratio (SNR) performance of the proposed method is comparable to that of the uniform sampled pulse code modulation (PCM) below 20 kbps data rate.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.4
• /
• pp.300-304
• /
• 2015

A low bit rate speech coder based on the non-uniform sampling technique is proposed. The non-uniform sampling technique is based on the detection of inflection points (IP). A speech block is processed by the IP detector, and the detected IP pattern is compared with entries of the IP database. The address of the closest member of the database is transmitted with the energy of the speech block. In the receiver, the decoder reconstructs the speech block using the received address and the energy information of the block. As results, the coder shows fixed data rate contrary to the existing speech coders based on the non-uniform sampling. Through computer simulation, the usefulness of the proposed technique is shown. The SNR performance of the proposed method is approximately 5.27 dB with the data rate of 1.5 kbps.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.10
• /
• pp.3551-3552
• /
• 2011

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.2017-2022
• /
• 2008

Of the experiments to shorten NMR measuring time by sparse sampling, non-uniform sampling (NUS) is advantageous. NUS miminizes systematic errors which arise due to the lack of samplings by randomization. In this study, I report the real-time acquisition of 3D NMR data using NUS and maximum-entropy (MaxEnt) data processing. The real-time acquisition combined with NUS can reduce NMR measuring time much more. Compared with multidimensional decomposition (MDD) method, which was originally suggested by Jaravine and Orekhov (JACS 2006, 13421-13426), MaxEnt is faster at least several times and more suitable for the realtime acquisition. The designed sampling schedule of current study makes all the spectra during acquisition have the comparable resulting resolutions by MaxEnt. Therefore, one can judge the quality of spectra easily by examining the intensities of peaks. I report two cases of 3D experiments as examples with the simulated subdataset from experimental data. In both cases, the spectra having good qualitie for data analysis could be obtained only with 3% of original data. Its corresponding NMR measuring time was 8 minutes for 3D HNCO of ubiquitin.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.4
• /
• pp.36-44
• /
• 1992

To reduce the redundancy within samples that resulted from uniform sampling method, nonuniform sampling or nonredundant-sample coding methods can be considered. But it is well-known that when conventional nonuniform sampling methods are applied directly to speech signal, the amount of data required is comparable to or more than that required by uniform sampling method like PCM. To overcome this problem, we consider properties of speech signal in the sense of perception, and suggest a nonuniform sampling method at the maxima and minima of speech wave. To analyze the performance of the suggested method, compression ratio is considered. We show that compression ratio can be improved by silence detection, which can't be implemented by conventional methods based on uniform sampling. As experimental results, compression ratios of 1.54 without silence detection and 2.88 with silence detection for 8kHz 8-bit PCM signals are obtained.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.95-100
• /
• 2000

Presented in this paper is a scheme for constructing ball rolling blends of a non-uniform B-spline surface(NUBS) patches. Ball rolling blending is a popular technique for blending between parametric surfaces. Along the "common edge" of a pair of "base surfaces" to be blended, a sequence of "ball positions" is sampled. The radius of the ball may vary along the line. At each sampling point, a ball center point and a pair of ball contact points are computed by applying a Jacobian inversion method. Using ball contact points, the constructing scheme of blend NUBS patches consists three steps; 1) determination of intermediate control vertices; 2) determination of boundary vectors; 3) determination of B-spline control vertices. The proposed blending scheme has been tested in a Omega CAM system and found to be working satisfactorily.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.6
• /
• pp.608-616
• /
• 2013

This paper presents an adaptive sampling method for electrocardiogram (ECG) signal detection. First, by employing the strings matching process with compression dictionary, we recognize each segment of ECG with different characteristics. Then, based on the non-uniform sampling strategy, the sampling rate is determined adaptively. As the results of simulation indicated, our approach reconstructed the ECG signal at an optimized sampling rate with the guarantee of ECG integrity. Compared with the existing adaptive sampling technique, our approach acquires an ECG signal at a 30% lower sampling rate. Finally, the experiment exhibits its superiority in terms of energy efficiency and memory capacity performance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.2
• /
• pp.294-302
• /
• 2008

In this paper, we present a new image up-sampling method which registers low resolution images to the high resolution grid when Bayesian super-resolution image processing is performed. The proposed up-sampling method interpolates high-resolution pixels using high-frequency data lying in all the low resolution images, instead of up-sampling each low resolution image separately. The interpolation is based on B-spline non-uniform re-sampling, adjusted for the super-resolution image processing. The experimental results demonstrate the effects when different up-sampling methods generally used such as zero-padding or bilinear interpolation are applied to the super-resolution image reconstruction. Then, we show that the proposed hybird up-sampling method generates high-resolution images more accurately than conventional methods with quantitative and qualitative assess measures.

• Journal of Communications and Networks
• /
• v.5 no.4
• /
• pp.319-327
• /
• 2003

We consider the problem of low-sampling rate high-resolution channel estimation and timing for digital ultrawideband (UWB) receivers. We extend some of our recent results in sampling of certain classes of parametric non-bandlimited signals and develop a frequency domain method for channel estimation and synchronization in ultra-wideband systems, which uses sub-Nyquist uniform sampling and well-studied computational procedures. In particular, the proposed method can be used for identification of more realistic channel models, where different propagation paths undergo different frequency-selective fading. Moreover, we show that it is possible to obtain high-resolution estimates of all relevant channel parameters by sampling a received signal below the traditional Nyquist rate. Our approach leads to faster acquisition compared to current digital solutions, allows for slower A/D converters, and potentially reduces power consumption of digital UWB receivers significantly.

• Journal of the Korean Statistical Society
• /
• v.7 no.1
• /
• pp.27-43
• /
• 1978

This paper deals with the problem of obtaining a minimum cost acceptance sampling plan for destructive testing. The cost model is constructed under the assumption that the sampling procedure takes the following form; 1) lots rejected on the first sample are acreened with a non-destructive testing, 2) the screening is assumed to be imperfect, and therefore, after the screening, a second sample is taken to determine whether to accept the lot of to scrap it. The usual sampling procedures for destructive testing can be regarded as special cases of the above one. Utilizing Hald's Bayesian approach, procedures for finding the global optimal sampling plans are given. However, when the lot size is large, the global plan is very different to obtain even with the aid of an electronic computer. Therefore a method of finding suboptimal plan is suggested. An example with uniform prior is also given.