• Journal of Energy Engineering
• /
• v.23 no.1
• /
• pp.40-45
• /
• 2014

The ventilation frequency of 0.5 times in residential facilities is applied mandatorily to the housing facilities containing more than 100 house units to improve the indoor air quality and create comfortable interior conditions and pleasantness for residents. The Building Energy Efficiency Rating system requires the implementation of leakage test based on ventilation frequency with the test results being reflected in the efficiency ratings, thereby stimulating the precise construction of the fittings in the periphery of windows and savings of energy that can be lost due to the infiltration air. The inspection results of the Building Energy Efficiency Rating at the site showed that the ventilation frequency was in the range between 0.63 and 0.71 and that the difference was found to have a significant effect on the amount of energy reduction. It is urgent to conduct the study on highly leakage-proof buildings and construction methods, along with the expansion of mandatory leakage-proof diagnosis of non-residential buildings, considering the mandatory ventilation frequency below 0.6 for passive houses under the European standards and the target set by Korea to introduce the passive house, the rigorous standard for energy efficiency in buildings and mitigating their ecological footprint, by 2017 and achieve the zero house by 2025.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.14 no.2
• /
• pp.294-304
• /
• 2008

Purpose: Cancer patients experience a range of physical and psychological sequelae. Consistent nursing support should be provided along the cancer treatment path. This study aimed to i)examine the effects of a telephone counseling program after discharge on perceived health, psychological well-being, and satisfaction with nursing services, and ii)describe symptom distress and their coping methods. Method: The study was a quasi-experimental design with a non-equivalent pre-post test. The sample included 20 women with gynecologic cancer in the experimental group and the same in the control group from a university hospital in Seoul. The telephone intervention was given once from 5 to 7 days after the chemotherapy. The General Well-Being Schedule and Symptom Distress Scale were used. Result: An effect from telephone counseling was found only in the vitality subscale of psychological well-being. Other subscores, perceived health, or satisfaction with nursing services did not differ between the two groups. Pain, skin change, decreased appetite, and constipation were the major symptoms and a relatively few coping strategies were utilized. Conclusion: Protocol of telephone counseling led by a nurse needs to be further developed in regard to best timing, amount, and target effects for follow-up care of gynecologic cancer patients.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.1-17
• /
• 2000

Carcinogen-DNA adduct analysis has potential for biomonitoring the earliest effects of exposure to many chemical carcinogens. They are the covalent reaction products of electrophiles and nucleophilic sites on DNA and the initial damage to DNA induced by many carcinogens. So many researchers begin to use them as biomarker for monitoring the earliest exposure of carcinogens and develop the effective analytical techniques about them. Randerath, Gupta and coworkers(1981, 1982) has also developed a $^{32}P$-postlabelling method as one among them. A major project for biomonitoring workers with carcinogen-DNA adducts is to develop non-invasive samples instead of tissues of target organs such as baldder and lung. This study use the exfoliated urothelial cells in urine for examine benzidine-DNA adducts. The content of exfoliated urothelial cells is not enough to significantly measure DNA content with spectrophotometer, and require the another way. So firstly washing the collected cells with PBS and 70% ethanol and centrifuge them for removing the crystals in urine, which block the isolation of DNA adducts. And then, measure the total nucleotide after $^{32}P$-postlabelling for calculating RAL. $[{\gamma}-^{32}P]ATP$ using for $^{32}P$-postlabelling, can synthesize with $[^{32}P]H_3PO_4$, and reagent and enzyme mixture (RM, EM), which is very economic in case of requiring a lot of them. Chromatography was composed of two steps. First step was to separate adduct ones from unadducted nucleotide, and secondary step was separate each adduct, which were performed with 4 kinds of solvents and different directions on TLC. With this procedure, we measure the DNA adducts in exfoliated urothelial cells of workers who were employed in benzidine and benzidine-dye company. RAL of adducts were $89.0{\times}10^7$ and $57.0{\times}10^7$ in them. In conclusion, we can significantly measure the DNA adduct in exfoliated urothelial cells by using the above $^{32}P$-postlabelling procedures, and use them to be biomonitoring workers who exposed carcinogens.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.91-97
• /
• 2014

In this research, we would try to evaluate the applicability in cadastral resurvey surveying by analysing the accuracy of building boundary surveying using the reflective sheet total station surveying. When we analyse it, we refer the reflective sheet which can supplement not only the difficulties of total station surveying and GPS surveying caused by the diversity of the building structure but also the errors of non prism total station caused by material of the object. Each reflected angles $90^{\circ}$ and $60^{\circ}$, $30^{\circ}$ of RMSE results were analyzed by RMSE between 1.2mm~2.8mm and 2.2mm~4.0mm, 2.5mm~4.4mm for each distance. The result of X RMSE was analyzed to be 0.0043m in a boundary surveying for existing building between prism surveying and reflective sheet surveying, and also Y RMSE was 0.038m. The source of error is estimated that the body of the prism can not be exactly attached to the edge of a building. Therefore, it will be very helpful to use a reflective sheet surveying with a prism in both the limit of collimation and error reductions as a building boundary measurement in cadastral resurvey surveying.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.11
• /
• pp.5339-5343
• /
• 2012

The induction of apoptosis in target cells is a key mechanism for most anti-tumor therapies. Bufalin is a cardiotonic steroid that has the potential to induce differentiation and apoptosis of tumor cells. Research on bufalin has so far mainly involved leukemia, prostate cancer, gastric cancer and liver cancer, and has been confined to in vitro studies. The bufadienolides bufalin and cinobufagin have been shown to induce apoptosis in a wide spectrum of cancer cell. The present article reviews the anticancer effects of bufalin. It induces apoptosis of lung cancer cells via the PI3K/Akt pathway and also suppressed the proliferation of human non-small cell lung cancer A549 cell line in a time and dose dependent manner. Bufalin, bufotalin and gamabufotalin, key bufadienolides, significantly sensitize human breast cancer cells with differing ER-alpha status to apoptosis induction by the TNF-related apoptosis-inducing ligand (TRAIL). In addition, bufadienolides induce prostate cancer cell apoptosis more significantly than that in breast epithelial cell lines. Similar effects have been observed with hepatocellular carcinoma (HCC) but the detailed molecular mechanisms of inducing apoptosis in this case are still unclear. Bufalin exerts profound effects on leukemia therapy in vitro. Results of multiple studies indicate that bufalin has marked anti-tumor activities through its ability to induce apoptosis. Large-scale randomized, double-blind, placebo or positive drug parallel controlled studies are now required to confirm the efficacy and apoptosis-inducing potential of bufalin in various cancers in the cliniucal setting.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.115-127
• /
• 2019

The low-flow grouting injection technique, the target construction method for this study, is a method of pouring mortar into the ground by non-emission replacement principle, which can be expected to increase the density of the ground, and, in some cases, be used as a base file using the strength of the high injection solids, along with low noise, low pollution, and high durability. To verify that the dynamic characteristics of the ground are improved by the low-flow injection technique, the test work was conducted on the site and physical tests were performed, and the quality of the improvement formed in the ground was verified through the indoor test on the core and core recovery rate was analyzed. The density logs test layer calculated the volume density of the ground layer by using the Compton scattering of gamma-rays, and the sonic logs was tested on the ground around the drill hole using a detector consisting of sonar and receiver devices inside the drill hole. As a result of the measurement of the change in physical properties (density and sonic logs) before and after grouting, both properties were basically increased after infusion of grout agent. However, the variation in density increase was greater than the increase in speed after grouting, and the ground density measurement method was thought to be effective in measuring the fill effect of the filler. Strength and core recovery rates were measured from specimens taken after the age of 28 days, and the results of the test results of the diffusion and strength test of the improved products were verified to satisfy the design criteria, thereby satisfying the seismic performance reinforcement.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.129-129
• /
• 2016

Graphene, as a single layer of $sp^2$-bonded carbon atoms packed into a 2D honeycomb crystal lattice, has attracted much attention due to its outstanding properties. In order to synthesize high quality graphene, transition metals, such as nickel and copper, have been widely employed as catalysts, which needs transfer to desired substrates for various applications. However, the transfer steps are not only complicated but also inevitably induce defects, impurities, wrinkles, and cracks of graphene. Furthermore, the direct synthesis of graphene on dielectric surfaces has still been a premature field for practical applications. Therefore, cost effective and concise methods for transfer-free graphene are essentially required for commercialization. Here, we report a facile transfer-free graphene synthesis method through nickel and carbon co-deposited layer. In order to fabricate 100 nm thick NiC layer on the top of $SiO_2/Si$ substrates, DC reactive magnetron sputtering was performed at a gas pressure of 2 mTorr with various Ar : $CH_4$ gas flow ratio and the 200 W DC input power was applied to a Ni target at room temperature. Then, the sample was annealed under 200 sccm Ar flow and pressure of 1 Torr at $1000^{\circ}C$ for 4 min employing a rapid thermal annealing (RTA) equipment. During the RTA process, the carbon atoms diffused through the NiC layer and deposited on both sides of the NiC layer to form graphene upon cooling. The remained NiC layer was removed by using a 0.5 M $FeCl_3$ aqueous solution, and graphene was then directly obtained on $SiO_2/Si$ without any transfer process. In order to confirm the quality of resulted graphene layer, Raman spectroscopy was implemented. Raman mapping revealed that the resulted graphene was at high quality with low degree of $sp^3$-type structural defects. Additionally, sheet resistance and transmittance of the produced graphene were analyzed by a four-point probe method and UV-vis spectroscopy, respectively. This facile non-transfer process would consequently facilitate the future graphene research and industrial applications.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.5
• /
• pp.187-192
• /
• 2011

Tilt angle of r-plane wafer is a one of the important factors related with the quality of the GaN epi, so the fine control of the tilt angle is important for the growing of high quality non-polar a-GaN epi. We prepared the R-plane sapphire wafers with slight tilt angles for nonpolar a-plane GaN. The target tilt angles of ${\alpha}$ and ${\beta}$ were 0, -0.1, -0.15, -0.2, -0.4, $-0.6^{\circ}$ and -0.1, 0, $0.1^{\circ}$, respectively. The tilt angles of sliced R-plane sapphire wafers were measured by x-ray and the statistical evaluation of reliability of tilt angles of wafers were performed. The tolerance of the tilt angle was ${\pm}0.03^{\circ}$. R-plane sapphire wafers have relatively large distributions of BOW and TTV data than c-plane sapphire wafers due to the large anisotropy of R-plane. As the tilt angle ${\alpha}$ was increased from -0.1 to $-0.6^{\circ}$, the step widths and heights were decreased from 156 nm to 26 nm and 0.4 nm to 0.2 nm, respectively. The growth and qualities of GaN epi seems to be largely affected by the change of step structure of R-plane sapphire wafers with tilt angle.

• Journal of the Korea Convergence Society
• /
• v.5 no.4
• /
• pp.137-146
• /
• 2014

This study investigated the effects of response prompting through 3-steps compliance training to reaction time for child with Asperger's syndrome(AS). The participant was 3 and 8 year-old boy who was diagnostic As with non-compliant, delayed receptive language. Study design was multiple-baseline across behaviors. Target Behaviors were hands-up, following direction, and answering behavior. Dependent variable was latency reaction time during compliance training. This results mean that reaction time was increased raise hands-up behavior, compliance behavior and response ask questions. During intervention, the participant improve the rate on-task behavior as well as reduce off-task behaviors.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.269-276
• /
• 2001

Several experiments including persistence, distribution, leaching, and terminal residue trials were carried out to investigate the behavior of cyclosulfamuron in rice paddies. Cyclosulfamuron was gradually dissipated in two different soils showing the first-order kinetics. Half-lives of the herbicide were calculated to be $17{\sim}30$ and $14{\sim}16$ days under field and laboratory conditions, respectively. In the paddy soil/water system, the residue tended to reside more in the soil phase as time elapsed. Cyclosulfamuron was less persistent in paddy water than in soil with half-lives of 10 and 19 days, respectively. No cyclosulfamuron was leached below 20 cm-deep soil during water percolation with 50 cm hydraulic head, while some downward mobility was observed within the soil column. When EC and SC formulations of cyclosulfamuron were applied to the paddy field at 120 or 150-day pre-harvest intervals, its terminal residues in hulled rice were all less than 0.01 mg/kg, irrespective of formulation type and application timing. In rice straw, however, some residues were found at $<0.02{\sim}0.05$ mg/kg as SC formulation was applied. Rapid dissipation, restricted mobility, and low terminal residues of cyclosulfamuron in rice paddies suggest that no significant residues would be transported or carried over to the non-target environment.