• Current Optics and Photonics
• /
• v.7 no.1
• /
• pp.33-37
• /
• 2023

Real-time adaptive control of laser output polarization is presented in a 10-W-level non-polarization-maintaining (non-PM) fiber amplifier. While the output polarization from a non-PM fiber amplifier tends to be irregular, depending on output power, time, and perturbation, closed-loop polarization control can maintain the polarization extinction ratio at higher than 20 dB. Real-time polarization control can attain the target linear polarization mostly within 1.4-25 ms and shows stability against external perturbations. This approach can satisfy both linear polarization and high output power in a non-PM amplifier, and facilitates optimization of laser performance and maintenance-free operation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.202-205
• /
• 2004

This paper represents the role of pinna in localizing target direction. Specially, this paper described what is the role of right-side pinna versus left-side pinna. In this experiment, one side of the pinna function was distorted intentionally by inserting a short tube on the ear canal. The localization error caused by right and left side pinna distortion was investigated. Since a laser pointer showed much less error (0.5%) in localizing target position than FASTRAK (30%) that has been generally used, it was used for the pointing task. It was found that harmonic components were not essential for the auditory target localization, however, non-harmonic nearby frequency components were more important to localize target direction of sound. We have found that the right pinna is one of the most important functions in localizing target direction and pure tone with only one frequency component is confusing for localization.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.717-722
• /
• 2007

Inverse synthetic aperture radar(ISAR) images represent two-dimensional(2-D) spatial distribution of electromagnetic scattering phenomenology against a target. Hence, they are usually used in the areas of automatic target recognition (ATR) or non-cooperative target recognition(NCTR), identifying a target using radar in a long distance. This paper makes use of Korea Miniature Synthetic Aperture Radar(KOMSAR) to generate ISAR images of a real and maneuvering aircraft. The data obtained from KOMSAR are processed to eliminate phase errors due to motion of a target, with the use of entropy-based ISAR autofocusing technique. Results show that we can successfully obtain ISAR images of a real aircraft, and the success of experiments implies that a significant step toward ATR using radar has been established.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.9
• /
• pp.1317-1324
• /
• 2017

These days, a penetration of distributed generation(DG) has increased in power system. Due to increased penetration of DG, a whole system is forced to install the maximum hosting capacity of DG. Therefore analysis between the maximum hosting capacity of DG at the target bus and the whole system is important. If we know the maximum hosting capacity, it will be able to satisfy the demand of system planner and customer. In this paper, we use a genetic algorithm to calculate the hosting capacity with optimization program using Design Analysis Kit for Optimization and Terascale Applications(DAKOTA). To consider a real system, we establish constraints and use IEEE 34 node test system. In addition, through the correlation coefficient between the target bus and the other buses, when capacity of DG at the target bus increases, we analyze which capacity of DG at the other buses will be decreased.

• Korean Management Science Review
• /
• v.32 no.1
• /
• pp.49-63
• /
• 2015

This paper investigates an aircraft-target assignment problem in consideration of deconfliction. The aircraft-target assignment problem is the problem to assign available aircrafts and weapons to targets that should be attacked, where the objective function is to minimize the total expected damage of aircrafts. Deconfliction is the way of dividing airspaces for aircraft flight to ensure the safety while performing the mission. In this paper, mixed integer programming model is suggested, where it considers deconfliction between aircrafts. However, the suggested MIP model is non-linear and limited to get solution for large size problem. The 2-phase decomposition model is suggested for efficiency and computation, where in the first phase target area is divided into sectors for deconfliction and in the second phase aircrafts and weapons are assigned to given targets for minimizing expected damage of aircraft. The proposed decomposition model shows outperforms the model developed for comparison in the computational experiment.

• Journal of Korea Multimedia Society
• /
• v.21 no.6
• /
• pp.698-704
• /
• 2018

When the new ammunition is designed, it is necessary to confirm in advance how long the target distance is depends on the shape and weight of the designed ammunition. Therefore we can use commercial software such as PRODAS to predict the target distance in the design stage. This commercial software has aerodynamic data for various ammunition shape and calculates the target range by calculating the kinetic equations of the ammunition using the aerodynamic data most similar to the designed ammunition. The ammunition for predicting the target distance through software such as PRODAS is a non-guided ammunition that has no control after launch but the glide type ammunition is guided and control ammunition. So it is predicts the state of ammunition after the launch. A new type of simulator is needed to analyze the maximum range and to verify the onboard guided and control algorithm. The simulator constructed in this paper is an optimized simulator for glide type ammunition. Unlike unmanned aircraft and guided missiles. The rotation characteristics of the ammunition are considered and the navigation initialization algorithm is applied. The constructed simulator confirmed the performance by performing maximum range analysis of glide type ammunition.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.11
• /
• pp.1606-1615
• /
• 2001

The present study has been conducted to investigate heat/mass transfer characteristics on a target plate fur arrays of circular impingement jets with and without effusion holes. A naphthalene sublimation method is employed to determine local heat/mass transfer coefficients on the target plate. The effusion holes are located at the center of four injection holes in the injection plate where the spent air is discharged through the effusion hole after impingement on the target plate. For the array jet impingement without effusion holes, the array jets are injected into the crossflow formed by upstream spent air because the impinged jets must flow to the open exit. For small gap distances, heat/mass transfer coefficients without effusion holes are very non-uniform due to crossflow effects and re-entrainments of spent air. However, uniform distributions and enhanced values of heat/mass transfer coefficients are obtained by installing the effusion holes. For large gap distances, the crossflow has little influence on heat/mass transfer characteristics on the target palate due to the large cross-sectional open area between the injection and target plates. Therefore, the distributions and levels of heat/mass transfer coefficients are almost the same for both cases.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.136-141
• /
• 2009

This paper proposed a framework for handover method in continuously tracking a person of interest across cooperative pan-tilt-zoom (PTZ) cameras. The algorithm here is based on a robust non-parametric technique for climbing density gradients to find the peak of probability distributions called the mean shift algorithm. Most tracking algorithms use only one cue (such as color). The color features are not always discriminative enough for target localization because illumination or viewpoints tend to change. Moreover the background may be of a color similar to that of the target. In our proposed system, the continuous person tracking across cooperative PTZ cameras by mean shift tracking that using color and shape histogram to be feature distributions. Color and shape distributions of interested person are used to register the target person across cameras. For the first camera, we select interested person for tracking using skin color, cloth color and boundary of body. To handover tracking process between two cameras, the second camera receives color and shape cues of a target person from the first camera and using linear color calibration to help with handover process. Our experimental results demonstrate color and shape feature in mean shift algorithm is capable for continuously and accurately track the target person across cameras.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.5
• /
• pp.449-454
• /
• 2006

Here we present a sensitive DNA detection protocol using quantum dots (QDs) and magnetic beads (MBs) for large volume samples. In this study, QDs, conjugated with streptavidin, were used to produce fluorescent signals while magnetic beads (MBs) were used to isolate and concentrate the signals. The presence of target DNAs leads to the sandwich hybridization between the functionalized QDs, the target DNAs and the MBs. In fact, the QDs-MBs complex, which is bound using the target DNA, can be isolated and then concentrated. The binding of the QDs to the surface of the MBs was confirmed by confocal microscopy and Cd elemental analysis. It was found that the fluorescent intensity was proportional to concentration of the target DNA, while the presence of non-complementary DNA produced no significant fluorescent signal. In addition, the presence of low copies of target DNAs such as 0.5 pM in large volume samples up to 40mL was successfully detected by using a magnet-assisted concentration protocol which consequently results in the enhancement of the sensitivity more than 100-fold.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.10a
• /
• pp.13-16
• /
• 2004

This paper deals with a one-searcher multi-target search problem where targets with different detection priorities move in Markov processes in each discrete time over a given space search area, and the total number of search time intervals is fixed. A limited search resource is available in each search time interval and an exponential detection function is assumed. The searcher can obtain a target detection award, if detected, which represents the detection priority of target and is non-increasing with time. The objective is to establish the optimal search plan which allocates the search resource effort over the search areas in each time interval in order to maximize the total detection award. In the analysis, the given problem is decomposed into intervalwise individual search problems each being treated as a single stationary target problem for each time interval. An associated iterative procedure is derived to solve a sequence of stationary target problems. The computational results show that the proposed algorithm guarantees optimality.