• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.271-278
• /
• 2021

According to the capacity design of eccentrically braced frames (EBFs), non-dissipative members such as columns, link-exterior beams, and braces must remain within the elastic region when a fully-yielded and strain-hardened link transmits force to them. The current AISC 341 standard suggests a strain-hardening factor (SHF) of 1.25 for a link under capacity design, regardless of its properties. However, all the links in an EBF are not likely to yield simultaneously to the extent to which the overstrength corresponding to 1.25 times their expected strength is attained, especially for high-rise buildings. Considering this phenomenon, a technique to predict the SHF of links at the limit state of the structure is proposed in this paper. The exact prediction of the links' SHF could save structural quantities dramatically while achieving the principle of capacity design. To validate the effectiveness of this technique, SHF values predicted by conducting linear analysis were compared with those evaluated by nonlinear analysis. Furthermore, the maximum demand-to-capacity ratios of the non-dissipative members were calculated to verify whether they would remain elastic at the limit state of the structure. Consequently, EBFs designed by the proposed method showed substantially economical quantities through the exact prediction of the SHFs, and the intention of capacity design was successfully achieved.

• ETRI Journal
• /
• v.45 no.2
• /
• pp.193-202
• /
• 2023

We demonstrate the transmission of uncompressed 4K videos over the photonics-based terahertz (THz) wireless link using a directly modulated distributed feedback laser diode (DFB-LD). For optical heterodyne mixing and data modulation, a DFB-LD was employed and directly modulated with a 5.94-Gb/s non-return-to-zero signal, which is related to a 6G-serial digital interface standard to support ultra-high-definition video resolution. We derived the optimal frequency of the THz carrier by varying the wavelength difference between DFB-LD output and Tunable LD output in the THz signal transmitter to obtain the best transmission performances of the uncompressed 4K video signals. Furthermore, we exploited the negative laser-to-filter detuning for the adiabatic chirp management of the DFB-LD by the intentional discrepancy between the center wavelength of the optical band-pass filter and the output wavelength of the DFB-LD. With the help of the abovementioned methods, we successfully transmitted uncompressed 4K video signals over the 2.3-m wireless transmission distance without black frames induced by time synchronization error.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.702-708
• /
• 2018

3D printing technology is attracting increasing attention as a key technology of the fourth industrial revolution that can change the production paradigm of existing industries. The introduction of construction 3D printing technology has been slower than other industries because of the characteristics of the construction field. On the other hand construction automation using 3D printing is required to reduce the production population, as well as improve productivity and safety. In this study, a construction 3D printing work breakdown structure and link method to a standard estimation system were developed as a preliminary preparation for introducing 3D printing to construction. Based on expert consultation on construction and 3D printing, a hypothetical scenario was developed based on existing construction 3D printing technology. According to the scenario, 16 kinds of works required for 3D printing construction work were derived. The existing work breakdown structure and standard estimation system were analyzed, and the 3D printing work was linked. 3D printing works that were the same as the existing breakdown structure were found, and non-existent works were added to the similar breakdown structure. These results are expected to be helpful for future 3D printing construction management and cost estimation. The actual standard estimation system through 3D printing work will need to be calculated.

• Journal of Arbitration Studies
• /
• v.24 no.3
• /
• pp.1-31
• /
• 2014

The foundation of the arbitration jurisdiction is the arbitration agreement entered into by the parties to a contract. Usually, only the signatory parties to a contract and the disputes arising from a contract that includes an arbitration clause or to which the arbitration clause relates are the ones that can be submitted to arbitration. This article discusses some of the arguments for extending the arbitration clause in complex arbitrations, that is, in those cases where there are more than two parties, more than two contracts or more than two parties and contracts. Particularly, this paper addresses multiple contract arbitration when the contracts are related. One of the arguments used by the arbitral tribunal for the extension of jurisdiction is the existence of a link between the contracts. Additional arguments include implied consent, participation in the negotiation and performance of a contract and good faith. The article also discusses some of the typical cases of linked contracts in many civil law countries, such as subcontracts, third party beneficiaries and standard terms of contracts, from which arbitral jurisdictions problems may arise. Finally, special attention is given to Article 14 of the 2008 Peruvian Arbitration Law as the first provision in an arbitration law in Latin America that extends the arbitration agreement to non-signatory parties using for this a mixed approach.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1483-1485
• /
• 2005

In recent years, customers and power supplies are interested in power quality. Demands of customers are change from standard quality of distribution power system to various high quality of distribution power system. so, it is necessary to apply power quality compensator. in our project, we develop the UPQC(Unfied Power Quality Compensator of 45kVA which compensates power factor and voltage sag, interruption. it is very frequently occurred power quality problems. As a series and shunt compensator, UPQC consists of two inverters with common dc link capacitor bank. It compensates the current quality in the shunt part and the voltage quality in the series part. In this paper, we present simulation and test result of developed UPQC system. Test for UPQC are performed at voltage sag, flickers and non-linear load conditions. For voltage sag and ficker generation, we use RTDS(Real Time Digital Simulator) and power amplifier system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.101-113
• /
• 2008

The new wireless multimedia environment is coming because of the variety of an user requirement and a traffic increase which we can not accept in the IMT-2000 present systems. To offer the wireless multimedia service the world wireless communication company which included the ITU-R is developing the standard and technique of 4G systems. We analyzed the technique criteria of the 4G wireless communication system in this paper which is based on that of WiBro System. The mobile communication traffic is predicted Up/Down-link of non-symmetric in the future. And we proposed the PHY layer parameters of occupied frequency bandwidth of Up/Down-link with both 1:3 and 1:6. And we verified this through the simulation. So we proposed the technique criteria for 4G wireless communication in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.922-925
• /
• 2004

Bluetooth technology is essentially a method for wireless connection of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments. The bluetooth system supports both point-to-point connection and point-to-multipoint connections. In point-to-multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There is one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The Bluetooth standard has been suggested that Bluetooth equipments can be used in the short-range, maximum 100 meters . It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.222-232
• /
• 2003

In accordance with the changes in the wireless communication environment, there has been a great need to satisfy the demand for diverse modes of information exchange. Various types of short-distance wireless communication technology have been developed and studied to meet this demand. Among them, Bluetooth which has recently been acclaimed as the standard for short-distance wireless communication, has been the focus of many such studies. However, Bluetooth has weaknesses in its suuity features when its in security services are applied to Home networks. The purpose of this study is to propose a safe Bluetooth scenario with an upgraded suity feature. This paper first reviews the general characteristics and security features of Bluetooth together with an analysis of its weaknesses, and presents the formation and maintenance process of Bluetooth piconet what is created by using ECDSA and group key in the ACL(Asynchronous Connection-less Link) connection through a safe Bluetooth inquiry process.

• Journal of Distribution Science
• /
• v.18 no.5
• /
• pp.5-13
• /
• 2020

Purpose: The aim of this article is to test the link between growth of loan distribution and Bank Valuation in Vietnam's banking sector. At the same time, the study also compared the differences in the effect of growth of loan to valuation bank in banks of different sizes, ownership rates and bank values. Research design, data and methodology: With panel data estimation techniques along with robust standard error for a sample of the banks listed on Vietnam stock exchange from 2012 to 2019. Results: Growth of loan has a positive impact on Bank Valuation (by Tobin's Q). A closer investigation provides evidence for the differential valuation effect of loan growth depending on different features of banks. Specifically, loan growth is found positively and significantly associated with Bank Valuation in small and non-state-owned banks only. Besides, bank size, deposit, and return on equity are found negatively associated with Tobin's Q, while loan loss provisions exhibit a positive relation with this measure of Bank Valuation. Conclusions: These findings provide contributions to the literature on the existence of the effect of loan growth on Bank Valuation. At the same time, the study also provides practical implications for policy makers in banks and investors.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1052-1057
• /
• 2004

Bluetooth technology is essentially a method for wireless connectivity of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments, The bluetooth system both point-to point connection and point-to multipoint connection. In point-to multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The bluetooth standard ha s been suggested that bluetooth equipments can be used in the short-range, maximum 100 meters. It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.