• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.399-402
• /
• 2004

착탈식의 플라스틱 디스크와 부상형 광헤드를 사용하는 광드라이브에서 부상형 광헤드의 부상안정성 문제는 고밀도 표면기록의 신뢰성 확보를 위해 매우 중요한 요소로 고려되어야 한다. 플라스틱 디스크와 광헤드의 포커싱 제어를 위해 부상형광헤드의 광학적 조립오차와 플라스틱디스크의 보호층의 오차를 보상해주는 추가적인 엑츄에이터의 몇 가지 설계방안에 대해 검토한다. 또한 본 논문에서는 부상형 광헤드의 부상안정성을 위하여 디스크의 굴곡에 대한 부상특성과 안정성을 해석하고, 특히 로드/언로드 시의 부상안정성에 대해서도 검토해 본다.

• Structural Monitoring and Maintenance
• /
• 제5권4호
• /
• pp.463-488
• /
• 2018

In the last decades, research efforts have been spent to investigate the effect of prestressing on the dynamic behaviour of prestressed concrete (PSC) beams. Whereas no agreement has been reached among the achievements obtained by different Researchers and among the theoretical and the experimental results for simply supported beams, very few researches have addressed this problem in continuous PSC beams. This topic is, indeed, worthy of consideration bearing in mind that many relevant bridges and viaducts in the road and railway networks have been designed and constructed with this structural scheme. In this paper the attention is, thus, focused on the dynamic features of continuous PSC bridges taking into account the effect of prestressing. This latter, in fact, contributes to the modification of the distribution of the bending stress along the beam, also by means of the secondary moments, and influences the flexural stiffness of the beam itself. The dynamic properties of a continuous, two spans bridge connected by a nonlinear spring have been extracted by solving an eigenvalue problem in different linearized configurations corresponding to different values of the prestress force. The stiffness of the nonlinear spring has been calculated considering the mechanical behaviour of the PSC beam in the uncracked and in the cracked stage. The application of the proposed methodology to several case studies indicates that the shift from the uncracked to the cracked stage due to an excessive prestress loss is clearly detectable looking at the variation of the dynamic properties of the beam. In service conditions, this shift happens for low values of the prestress losses (up to 20%) for structure with a high value of the ratio between the permanent load and the total load, as happens for instance in long span, continuous box bridges. In such conditions, the detection of the dynamic properties can provide meaningful information regarding the structural state of the PSC beam.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2008년도 공동학술대회
• /
• pp.131-136
• /
• 2008

일주문 주변 지반의 지반 구조 및 상태를 파악하고 복원시 보존, 보수의 방향 및 설계자료를 제공하기 위해, 탄성파 탐사, 전기비저항탐사, 평판재하시험 등의 비파괴 지구물리탐사를 수행하였다. 전기비저항탐사결과, 전반적인 전기비저항분포는 50-1300 ohm-m의 범위를 보여주고 있다. 또한 일주문 석주 남쪽 1m, 석주 3번과 4번 사이, 석주 2번과 3번 북쪽 1m 위치에서 주위보다 비교적 낮은 전기비저항 이상을 보여주고 있다. 석주 3번과 4번 사이에서 나타나는 낮은 전기비저항 이상은 탄성파 반사법 탐사결과에서 나타나는 이상구간과 일치함을 보여주고 있다. 평판재하시험 결과 허용지지력은 $10.70tf/m^2$이상이며, 이때의 침하량은 19.635mm로 산정되었다. 일주문 복원시 설계하중은 가정치를 적용하여 계산한 결과 $16.37t/m^2$로 계산되었으며, 이는 허용지지력을 훨씬 상회하므로 기초지반에 대한 강화대책이 반드시 필요한 것으로 판단된다.

• Tribology and Lubricants
• /
• 제30권1호
• /
• pp.59-63
• /
• 2014

Laser Surface Texturing(LST) is a surface engineering process used to improve tribological characteristics of materials by creating patterned microstructures on the mechanical contact surface. In LST technology, a pulsated laser beam is used to create arranged dimples on a surface by a material ablation process, which can improve such as load capacity, wear resistances, lubrication lifetime, and reduce friction coefficients. In the present study, the effect of multi-scale LST on lubricant regime was investigated. A pulsed Nd:YAG laser was applied on the bearing steel(AISI 52100) to create arranged dimples. To optimize the surface texturing effect on friction, multi-scale texture dimples with some specific formula arrays were fabricated by combining circles, ellipses and the laser ablation process. The tribological testing of multi-scale textured surface was performed by a flat-on-flat unidirectional tribometer under lubrication and the results compared with that of the non-textured surface. Through an increase in sliding speed, the beneficial effect of multi-scale LST performance was achieved. The multi-scale textured surface had lower friction coefficient performances than the non-textured surface due to the hydrodynamic lubrication effect.

• Structural Engineering and Mechanics
• /
• 제58권5호
• /
• pp.757-781
• /
• 2016

The results of diagnostics and analysis of an industrial hall located on the premises of a thermal power plant severely damaged by fire are presented in the paper. The comprehensive failure-related diagnostics, non-destructive and destructive tests of steel and concrete materials, geodetic surveying of selected structural members, numerical modelling, static analysis and reliability assessment were focused on two basic goals: The determination of the current technical condition of the load bearing structure and the assessment of its post fire resistance as well as assessing the degree of damage and subsequent design of reconstruction measures and arrangements which would enable the safe and reliable use of the building. The current mechanical properties of the steel material obtained from the tests and measured geometric characteristics of the structural members with imperfections were employed in finite element models to study the post-fire behaviour of the structure. In order to compare the behaviour of the numerically modelled steel roof truss, subjected to the effects of fire, with the real post-fire response of the damaged structure theoretically obtained resistance, critical temperature and the time at which the structure no longer meets the required reliability criteria under its given loading are compared with real values. A very good agreement between the simulated results and real characteristics of the structure after the fire was observed.

• Computers and Concrete
• /
• 제20권4호
• /
• pp.369-380
• /
• 2017

The effects of the vertical component of a ground motion on the earthquake performances of semi-ductile high-rise R/C structures were investigated in the present study. Linear and non-linear time-history analyses were conducted on an existing in-service R/C building for the loading scenarios including and excluding the vertical component of the ground motion. The ratio of the vertical peak acceleration to the horizontal peak acceleration (V/H) of the ground motion was adopted as the main parameter of the study. Three different near-source earthquake records with varying V/H ratio were used in the analyses. The linear time-history analyses indicated that the incorporation of the vertical component of a ground motion into analyses greatly influences the vertical deflections of a structure and the overturning moments at its base. The lateral deflections, the angles of rotation and the base shear forces were influenced to a lesser extent. Considering the key indicators of vertical deflection and overturning moments determined from the linear time-history analysis, the non-linear analyses revealed that the changes in the forces and deformations of the structure with the inclusion of the vertical ground motion are resisted by the shear-walls. The performances and damage states of the beams were not affected by the vertical ground motion. The vertical ground motion component of earthquakes is markedly concluded to be considered for design and damage estimation of the vertical load-bearing elements of the shear-walls and columns.

• Earthquakes and Structures
• /
• 제24권5호
• /
• pp.353-364
• /
• 2023

In this study, a method has been proposed for the static and dynamic nonlinear analysis of multi-storey buildings, which takes into account the contribution of axial deformations in vertical load-bearing elements, which are especially important in tall and narrow structures. Shear deformations on the shear walls were also taken into account in the study. The presented method takes into account the effects that are not considered in the fishbone and flexural-shear beam models developed in the literature. In the Fishbone model, only frame systems are modeled. In the flexural shear beam model developed for shear wall systems, shear deformations and axial deformations in the walls are neglected. Unlike the literature, with the model proposed in this study, both shear deformations in the walls and axial deformations in the columns and walls are taken into account. In the proposed model, multi-storey building is represented as a sandwich beam consisting of Timoshenko beams pieced together with a double-hinged beam. At each storey, the total moment capacities of the frame beams and the coupled beams in the coupled shear walls are represented as the equivalent shear capacity. On the other hand, The sums of individual columns and walls moment at the relevant floor level are represented as equivalent moment capacity at that floor level. At the end of the study, examples were solved to show the suitability of the proposed method in this study. The SAP2000 program is employed in analyses. In a conclusion, it is observed that among the solved examples, the proposed sandwich beam model gives good results. As can be seen from these results, it is seen that the presented method, especially in terms of base shear force, gives very close results to the detailed finite element method.

• 한국터널지하공간학회 논문집
• /
• 제17권4호
• /
• pp.473-485
• /
• 2015

디스크커터 내부부품의 손상과 관련된 원인은 씰(seal)부의 손상으로 인한 윤활유 부족, 토사 및 수분의 침투, 과부하, 과열, 조립문제, 소재문제 등이 있으며 손상 정도에 따라 디스크커터의 작동여부, 즉 회전이 가능한지가 나타난다. 따라서 디스크커터 회전문제에서의 핵심은 베어링의 작동여부라고 할 수 있다. 본 연구는 TBM의 굴착도구인 디스크커터의 재활용에 도움이 되고자 현장 적용된 디스크커터를 회수한 후 분해하여 내부부품을 조사하고 분석하였다. 그 결과, 허브의 부하영역에서의 스크래치는 재활용을 위해 가공작업이 필요한 것으로 나타났으며, 플로팅 씰의 래핑면과 오일상태는 재활용을 위한 성능파악에 필요한 시험으로 판단되었다. 특히 플로팅 씰은 베어링의 정상작동여부에 중요한 영향을 미치는 부품으로 파악되었다. 그 외의 베어링, 샤프트, 씰 리테이너에서는 특이사항이 없는 것으로 나타났다.

• 한국화재소방학회논문지
• /
• 제26권6호
• /
• pp.72-77
• /
• 2012

콘크리트-강재 합성보가 고온에 노출된 경우 콘크리트는 강재를 피복하여 온도상승을 지연시키거나 보 내부의 수열용량을 높이는 역할을 한다. 한편 재료 간 일체화로 부재의 강도가 보완되기 때문에 일반적으로 단순 강재 보 보다 합성보의 내화성능이 유리하게 나타난다. 합성보에서 외부에 노출된 강재의 온도상승은 부재 단면의 형상 및 강재의 노출정도와 직접 관련하게 된다. 본 연구에서는 합성보와 일반철골보에 내화인정을 받은 내화뿜칠재를 동일 두께로 피복하여 표준화재조건의 내화실험을 실시하고, 그 결과로 나타난 강재의 온도이력과 단면형상계수와의 관계를 비교 분석하였다. 강재 온도 측정결과와 부재별 단면형상계수의 상관관계를 살펴본 결과 상관성이 매우 높은 것으로 나타났다. 이 결과는 부재의 내화성능에 영향을 미치는 명확한 조건에 의해 비교우위의 성능예측이 가능한 경우 부재별 개별 인정 없이 표준구조 인정을 통한 보편적인 사용이 가능할 수 있음을 시사한다.

• 국제초고층학회논문집
• /
• 제4권1호
• /
• pp.9-25
• /
• 2015

Field measurements of various structures have been conducted for many purposes. Measurement data obtained by field measurement is very useful to determine vibration characteristics including dynamic characteristics such as the damping ratio, natural frequency, and mode shape of a structure. In addition, results of field measurements and modal identification can be used for modal updating of FEM analysis, for checking the efficiency of damping devices and so on. This paper shows some examples of field measurements and modal identification for structural health monitoring. As the first example, changes of dynamic characteristics of a 15-story office building in four construction stages from the foundation stage to completion are described. The dynamic characteristics of each construction stage were modeled as accurately as possible by FEM, and the stiffness of the main structural frame was evaluated and the FEM results were compared with measurements performed on non-load-bearing elements. Simple FEM modal updating was also applied. As the next example, full-scale measurements were also carried out on a high-rise chimney, and the efficiency of the tuned mass damper was investigated by using two kinds of modal identification techniques. Good correspondence was shown with vibration characteristics obtained by the 2DOF-RD technique and the Frequency Domain Decomposition method. As the last example, the wind-induced response using RTK-GPS and the feasibility of hybrid use of FEM analysis and RTK-GPS for confirming the integrity of structures during strong typhoons were shown. The member stresses obtained by hybrid use of FEM analysis and RTK-GPS were close to the member stresses measured by strain gauges.