• Steel and Composite Structures
• /
• 제4권6호
• /
• pp.489-507
• /
• 2004

The flexibility of the connection between steel and concrete largely influences the global behaviour of the composite beam. Therefore the way the connection is modelled is the key issue in its structural analysis. Here we present a new strain-based finite element formulation in which we consider non-linear material and contact models. The computational efficiency and accuracy of the formulation is proved with the comparison of our numerical results with the experimental results of Abdel Aziz (1986) obtained in a full-scale laboratory test. The shear connectors are assumed to follow a non-linear load-slip relationship proposed by Ollgaard et al. (1971). We introduce the notion of the generalized slip, which offers a better physical interpretation of the behaviour of the contact and gives an additional material slip parameter. An excellent agreement of experimental and numerical results is obtained, using only a few finite elements. This demonstrates that the present numerical approach is appropriate for the evaluation of behaviour of planar composite beams and perfect for practical calculations.

• Coupled systems mechanics
• /
• 제11권3호
• /
• pp.217-231
• /
• 2022

The present paper is concerned with a delamination analysis of a multilayered frame structure that exhibits non-linear creep behavior. A solution to the strain energy release rate is obtained by considering the time-dependent complementary strain energy in the frame. The mechanical behavior of the frame is treated by using a non-linear stress-strain-time relationship. The time-dependent solution to the strain energy release rate obtained in the present paper holds for a multilayered frame made of arbitrary number of adhesively bonded layers of different thicknesses and material properties. Besides, the dealamination is located arbitrary along the thickness. The solution to the strain energy release rate is verifiedby applying the J-integral approach. A parametric study of the strain energy release rate is carried-out. Two three-layered frame configurations are analyzed in order to evaluate the influence of the delamination crack location along the thickness on the strain energy release rate. The strain energy release is analyzed also for the case when a notch is cut-out in the inner delamination crack arm. The results obtained are compared with these for a frame without a notch.

• Advances in materials Research
• /
• 제12권1호
• /
• pp.15-29
• /
• 2023

In this paper, fracture analysis of a continuously inhomogeneous arch structure with two longitudinal cracks is developed in terms of the time-dependent strain energy release rate. The arch under consideration exhibits non-linear creep behavior. The cross-section of the arch is a rectangle. The material is continuously inhomogeneous along the thickness of the cross-section. The arch is loaded by two bending moments applied at its end sections. The mechanical behavior of the material is described by using a non-linear stress-strain-time relationship. The two longitudinal cracks are located symmetrically with respect to the mid-span of the arch. Due to the symmetry, only half of the arch is considered. Time-dependent solutions to strain energy release rate are obtained by analyzing the balance of the energy. For verification, time-dependent solutions to the strain energy release rate are derived also by considering the time-dependent complementary strain energy. The evolution of the strain energy release rate with the time is analyzed. The effects of material inhomogeneity, locations of the two cracks along the thickness of the arch and the magnitude of the external loading on the time-dependent strain energy release rate are evaluated.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.284-290
• /
• 2012

This paper addresses a new passive target tracking problem using the range differences measured by cooperative UAVs. In order to solve the range difference based passive target tracking problem within the framework of linear robust state estimation, the uncertain linear measurement model which contains the stochastic parameter uncertainty is derived by using the noisy range difference measurements. To cope with the performance degradation due to the stochastic parameter uncertainty, the recently developed non-conservative robust Kalman filtering technique [1] is applied. For the cruciform formation flying UAVs, the relationship between the target tracking performance and the measurement errors is quantitatively analyzed. The proposed filter has practical advantages over the classical nonlinear filters because, for its recursive linear structure, it can provide satisfactory convergence properties and is suitable for real-time multiple UAVs applications. Through the simulations, the usefulness of the proposed method is demonstrated.

• 디지털산업정보학회논문지
• /
• 제7권4호
• /
• pp.75-79
• /
• 2011

With the rapid growth of digital communication and the internet, the importance of conducting research on data encryption methods is increasing. Some of the pertinent researches that have been conducted so far introduced data encryption methods using chaos systems, and numerous researches are currently being conducted on such methods. The signals produced by the chaos systems are called "determined noise," and if this is applied to data encryption, very effective results can be obtained. Using the Henon map, the relationship between the non-linearity of the chaos system and the strength of encryption was analyzed, and a linear-structure chaos system that uses non-linearity as a variable for encryption strength was constructed. Using the constructed chaos system, an image was encrypted and decoded, and the correlation coefficient of the linear-structure chaos system's performance was calculated and then analyzed.

• 아태비즈니스연구
• /
• 제13권3호
• /
• pp.73-92
• /
• 2022

Purpose - The purpose of this paper is to explore the relationship between corporate social responsibility (CSR) and corporate present and future value. Design/methodology/approach - This paper intends to prove the relationship between CSR and corporate value once again by selecting A-share companies listed on the China Shenzhen Stock Exchange and Shanghai Stock Exchange from 2010 2017. This paper also examines the effect of five dimensions of CSR on corporate value in China. Findings - Empirical evidence shows that CSR is conducive to corporate value. The fulfillment of social responsibilities improves firm value in the future. Further, the regression results show that the social responsibility of the non-state-owned enterprise (Non-SOEs) group has a more significant effect on corporate financial performance than on the state-owned enterprise (SOEs) group. Research implications or Originality - This study has limitations. First, the grouping is only divided into two groups of SOEs and non-SOEs, and we did not consider foreign investments, that is, foreign-funded enterprises, for the comparative analysis. Second, only the linear relationship between CSR and corporate value was tested. In the future, we must determine whether there exists a nonlinear relationship between the two key concepts. Finally, there exists no research on CSR and corporate value by specific industries. Thus, the relationship between the five dimensions of CSR and corporate value should be investigated by specific industries.

• Journal of Preventive Medicine and Public Health
• /
• 제57권2호
• /
• pp.185-196
• /
• 2024

Objectives: Excess mortality associated with long-term exposure to fine particulate matter (PM_2.5) has been documented. However, research on the disease burden following short-term exposure is scarce. We investigated the cause-specific mortality burden of short-term exposure to PM_2.5 by considering the potential non-linear concentration-response relationship in Korea. Methods: Daily cause-specific mortality rates and PM_2.5 exposure levels from 2010 to 2019 were collected for 8 Korean cities and 9 provinces. A generalized additive mixed model was employed to estimate the non-linear relationship between PM_2.5 exposure and cause-specific mortality levels. We assumed no detrimental health effects of PM_2.5 concentrations below 15 ㎍/m³. Overall deaths attributable to short-term PM_2.5 exposure were estimated by summing the daily numbers of excess deaths associated with ambient PM_2.5 exposure. Results: Of the 2 749 704 recorded deaths, 2 453 686 (89.2%) were non-accidental, 591 267 (21.5%) were cardiovascular, and 141 066 (5.1%) were respiratory in nature. A non-linear relationship was observed between all-cause mortality and exposure to PM_2.5 at lag0, whereas linear associations were evident for cause-specific mortalities. Overall, 10 814 all-cause, 7855 non-accidental, 1642 cardiovascular, and 708 respiratory deaths were attributed to short-term exposure to PM_2.5. The estimated number of all-cause excess deaths due to short-term PM_2.5 exposure in 2019 was 1039 (95% confidence interval, 604 to 1472). Conclusions: Our findings indicate an association between short-term PM_2.5 exposure and various mortality rates (all-cause, non-accidental, cardiovascular, and respiratory) in Korea over the period from 2010 to 2019. Consequently, action plans should be developed to reduce deaths attributable to short-term exposure to PM_2.5.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.72.1-72.1
• /
• 2010

Thin film a-Si solar cells deposited by PECVD have many advantages compared to the traditional crystalline Si solar cells. They do not require expensive Si wafer, the process temperature is relatively low, possibility of scaling up for mass production, etc. In order to produce thin film solar cells, understanding the relationship between the material characteristics and deposition conditions is important. It has been reported by many groups that the band gap of the a-Si material and the deposition rate has an linear relationship, when RF power is used to control both. However, when the process pressure is changed in order to control the deposition rate and the band gap, a diversion from the well known linear relationship occurs. Here, we explain this diversion by the deposition condition crossing different plasma regions in the Paschen curve with a simple model. This model will become a guide to which condition a-Si thin films must be fabricated in order to get a high quality film.

• 대한임상검사과학회지
• /
• 제45권2호
• /
• pp.54-59
• /
• 2013

NonHDL cholesterol values have been suggested as a risk marker for cardiovascular disease. NonHDL cholesterol values were calculated, using a very simple measurement [nonHDL cholesterol=serum total cholesterol-HDL cholesterol]. This formula is very useful as a screening tool for identifying dyslipoproteinemias, risk assessment, and assessing the results of hypolipidemic therapy. The data from the 2009 Korean National Health and Nutrition Examination Survey were used. Analysis was done for 1,992 subjects with lipid panels (Cholesterol, HDL, LDLdirect and Triglycerides) results. We studied the relationship between nonHDL cholesterol and LDL cholesterol. As a result, nonHDL cholesterol values were plotted against the LDL direct and calculated values. The linear regression equation for nonHDL cholesterol and direct LDL cholesterol was $nonHDLchol=23.60+1.03{\times}LDLdirect$ (p<0.0001, $r^2=0.80$) in all subjects. The subjects were classified into triglyceride values. When triglycerides are below 400 mg/dL, the linear fit to LDL direct is found to be $[nonHDLchol=17.34+1.07{\times}LDLdirect]$ (p<0.0001, $r^2=0.88$) and to the Friedewald LDL calculation is $[nonHDLchol=23.10+1.02{\times}LDLcalc]$ (p<0.0001, $r^2=0.82$). For triglycerides above 400 mg/dL, the linear fit equation is $[nonHDLchol=87.57+0.92{\times}LDLdirect]$ (p<0.0001, $r^2=0.50$) and to the LDL calculated, it is $[nonHDLchol=142.70+0.50{\times}LDLcalc]$ (p<0.0001, $r^2=0.32$). This study provides examples of the utility of nonHDL cholesterol concentrations in clinical medicine.

• Earthquakes and Structures
• /
• 제4권4호
• /
• pp.341-363
• /
• 2013

Earthquake response calculation, parametric analysis and seismic parameter optimization of base-isolated structures are some critical issues for seismic design of base-isolated structures. To calculate the earthquake responses for such non-symmetric and non-classical damping linear systems and to implement the earthquake resistant design codes, a modified complex mode superposition design response spectrum method is put forward. Furthermore, to do parameter optimization for base-isolation structures, a graphical approach is proposed by analyzing the relationship between the base shear ratio of a seismic base-isolation floor to non-seismic base-isolation one and frequency ratio-damping ratio, as well as the relationship between the seismic base-isolation floor displacement and frequency ratio-damping ratio. In addition, the influences of mode number and site classification on the seismic base-isolation structure and corresponding optimum parameters are investigated. It is demonstrated that the modified complex mode superposition design response spectrum method is more precise and more convenient to engineering applications for utilizing the damping reduction factors and the design response spectrum, and the proposed graphical approach for parameter optimization of seismic base-isolation structures is compendious and feasible.