• 제목/요약/키워드: Non-linear Vibration

검색결과 405건 처리시간 0.043초

영구자석 선형동기전동기의 디텐트력 저감법 (Detent Force Minimization Techniques in Permanent Magnet Linear Synchronous Motor)

  • 임기채;우준근;홍정표;김규탁
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제49권11호
    • /
    • pp.749-756
    • /
    • 2000
  • Detent force develops generally undesirable effect that contributes to the output ripple of machine, vibration and noise. This paper proposes detent force minimization techniques for a Permanent Magnet Linear Synchronous Motor (PMLSM). In addition, thrust according to each minimization technique is estimated to observe the change of machine performance. A two-dimensional Finite Element Method is used to predict detent force and thrust due to structural factors and non-linearity. And moving node technique for geometric models is proposed to reduce modeling time and efforts.

  • PDF

유한요소-전달행렬법에 의한 스크롤 압축기 크랭크축의 과도 동적 해석 (Transient Dynamic Analysis of Scroll Compressor Crankshaft Using Finite Element-Transfer Matrix Method)

  • 김태종
    • 소음진동
    • /
    • 제10권1호
    • /
    • pp.97-106
    • /
    • 2000
  • The dynamic behavior of crankshaft-bearing system in scroll compressor has been investigated using the combined methodologies of finite elements and transfer matrices. The finite element formulation is proposed including the field element for a shaft section and the point element at balancer weight locations, bearing locations, etc., whereas the conventional method is used with the elements. The Houbolt method is used to consider the time march for the integration of the system equations. The linear stiffness and damping coefficients are calculated for a finite cylindrical fluid-film bearing by solving the Reynolds equation, using finite difference method. The orbital response of crankshaft supported on the linear bearing model is obtained, considering balancer weights of motor rotor. And, the steady state displacement of crankshaft are compared with a variation in balancer weight. The loci of crankshaft at bearing locations are composed of the synchronous whirl component and the non-synchronous whirl component.

  • PDF

파력을 받는 해양케이블의 동적 비선형 해석 (Dynamic Nonlinear Analysis of Ocean Cables Subjected to Wave Forces)

  • 김문영;김남일;이정렬
    • 한국해안해양공학회지
    • /
    • 제11권4호
    • /
    • pp.173-188
    • /
    • 1999
  • 김등(1999)은 등매개 케이블요소(isoparametric cable element)의 접선강성행렬과 질량행렬을 유도하고, 하중증분법을 이용하여 지점 변위를 일으키고 자중, 부력 및 조류력을 받는 해양케이블의 초기평형 상태를 결정하였다. 또한 초기의 정적평형상태를 기준으로 자유진동해석법을 제시하였다. 본 연구에서는 이전의 연구를 확장시켜서 파랑하중을 받는 해양 케이블의 비선형 동적 해석을 수행한다. 규칙파 및 불규칙파에 의한 파력을 받는 수중케이블에 대하여 비선형해석을 수행하고, 해석결과의 결과분석을 통하여 해양케이블의 동적특성을 파악한다.

  • PDF

Internal modals interactions analysis in terms of AFG nanorods based on Rayleigh model of nonlinear nonlocal axial behaviour

  • Somaye Jamali Shakhlavi;Shahrokh Hosseini Hashemi;Reza Nazemnezhad
    • Steel and Composite Structures
    • /
    • 제52권5호
    • /
    • pp.557-569
    • /
    • 2024
  • Nonlinear internal modals interactions analysis of axially functionally graded nanorods is evaluated on the basis of nonlocal elasticity theory and Rayleigh beam model for the first time. Functionally graded materials can be determined as nonhomogeneous composites which are obtained by combining of two various materials in order to get a new ideal material. In this research, material properties of nanorods are supposed to be calmly varied along the axial direction. Hamilton's principle is used to derive the equations with consideration of Von-Kármán's geometrically nonlinearity. Harmonic Differential Quadrature (HDQ) and Multiple Scale (MS) solution techniques are used to derive an approximate-analytic solution to the linear and nonlinear free axial vibration problem of non-classical nanorods for clamped-clamped and clamped-free boundary conditions. A parametric study is carried out to indicate the effects of index of AFG, aspect ratio, mode number, internal resonances and nonlinear amplitude on nonlinear nonlocal frequencies of axially functionally graded nanorods. Also, the effects of nonlocal and nonlinear coefficients and AFG index on relationships of internal resonances have been investigated. The presented theatrical-semi analytical model has the ability to predict very suitable results for extracting the internal modal interactions in the AFG nanorod.

스파이크 웨이블렛 변환을 이용한 기어 시스템의 건전성 감시 (Condition Monitoring in Gear System Using Spike Wavelet Transform)

  • 이상권;심장선
    • 한국음향학회지
    • /
    • 제20권5호
    • /
    • pp.21-27
    • /
    • 2001
  • 기어 시스템의 충격음과 충격 신호는 대개 기어의 결함과 관련이 있다. 그래서 이러한 충격음과 충격 신호는 기어 시스템의 건전성 감시의 주요 요소로 사용되어진다. 본 연구에서는 이런 충격음과 충격 신호를 효율적으로 추출해 내기 위해 스파이크 웨이블렛 변환을 이용하는 방법을 제안한다. 스파이크 웨이블렛 변환은 기존에 제안된 연속 웨이블렛 변환의 한계점인 임의의 영역에서의 시간-주파수 분해능의 스케일 변수에 대한 선형성을 보완하여 비 선형적으로 이것을 조절할 수 있게 하였다. 이로 인해서 스파이크 웨이블렛 변환은 관심 주파수를 기준으로 연속 웨이블렛 변환보다 고주파 영역에서는 시간 분해능이 향상되고 동시에 저주파 영역에서는 주파수 분해능이 향상되어 기어 결함에 대한 정보 손실 없이 기어의 결함 위치를 보다 명확히 판단할 수 있는 장점을 가진다. 또한 본 연구에서는 상단 절손의 결함을 갖는 기어에 대한 실험을 통해 본 연구에서 제안하는 스파이크 웨이블렛 변환의 유용성을 검증하였다.

  • PDF

동적격자변형기법을 이용한 2차원 실린더의 와류유발진동에 대한 수치해석 (Numerical analysis of the vortex induced vibration of the 2-D cylinder using dynamic deforming mesh)

  • 이남훈;백지영;이승수
    • 한국항공우주학회지
    • /
    • 제41권1호
    • /
    • pp.1-9
    • /
    • 2013
  • 이 논문에서는 2 차원 실린더의 와류유발진동에 따른 Lock-in 현상에 대해 수치해석을 수행하였다. 실린더의 운동을 모사하기 위해 변형격자와 고정격자를 이용하였다. 스프링 상사기법을 이용하여 격자를 변형하였다. 격자수 및 시간 간격 등을 조절해 얻은 수렴된 수치해가 비교 및 검증에 사용되었다. 또한, 유체-구조 결합 방법들의 효율성과 정확도를 비교 검토하였다.

직사각형 평판의 비선형 진동 (Non-linear Vibration of Rectangular Plates)

  • Chang, Seo-Il;Lee, Jang-Moo
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1994년도 추계학술대회논문집; 한국종합전시장, 18 Nov. 1994
    • /
    • pp.35-39
    • /
    • 1994
  • One of the important characteristics of the response of nonlinear systems is the existence of subharmonic resonances. When some conditions in parameter space are satisfied. It is possible even in the presence of damping for a periodically excited nonlinear system to possess a response which is the combination of a contribution at the excitation frequency and a component at the system natural frequency. The system natural frequency being a submultiple of the excitation frequency implies that the resulting response is a subharmonic oscillation. In general, there also co-exists, for the system, a response at the excitation frequency, and initial conditions determine which of the steady-state responses is achieved in an experiment or a numerical simulation. In single-degree-of-freedom systems with harmonic excitation, depending on the type of the nonlinearity, e.g., cubic or quadratic the frequency of subharmonic response is respectively, one-third or one-half of that of the excitation frequency. Although subharmonic resonance is one of the principal characteristics of a nonlinear system the subharmonic responses of structures in the presence of internal resonances have been studied very rarely. In this work, we consider subharmonic responses in the two-mode approximation of the plate equations. It is assumed that the two modes are in one-to-one internal resonance. Constant and periodic steady-state solutions of the averaged equations are studied. Finally, the results of direct time integration of the original equations of motion are presented and compared with those obtained from the averaged equations.

  • PDF

Steady-state response and free vibration of an embedded imperfect smart functionally graded hollow cylinder filled with compressible fluid

  • Bian, Z.G.;Chen, W.Q.;Zhao, J.
    • Structural Engineering and Mechanics
    • /
    • 제34권4호
    • /
    • pp.449-474
    • /
    • 2010
  • A smart hollow cylinder consisting of a host functionally graded elastic core layer and two surface homogeneous piezoelectric layers is presented in this paper. The bonding between the layers can be perfect or imperfect, depending on the parameters taken in the general linear spring-layer interface model. The effect of such weak interfaces on free vibration and steady-state response is then investigated. Piezoelectric layers at inner and outer surfaces are polarized axially or radially and act as a sensor and an actuator respectively. For a simply supported condition, the state equations with non-constant coefficients are obtained directly from the formulations of elasticity/piezoelasticity. An approximate laminated model is then introduced for the sake of solving the state equations conveniently. It is further assumed that the hollow cylinder is embedded in an elastic medium and is simultaneously filled with compressible fluid. The interaction between the structure and its surrounding media is taken into account. Numerical examples are finally given with discussions on the effect of some related parameters.

Hybrid nonlinear control of a tall tower with a pendulum absorber

  • Orlando, Diego;Goncalves, Paulo B.
    • Structural Engineering and Mechanics
    • /
    • 제46권2호
    • /
    • pp.153-177
    • /
    • 2013
  • Pendulums can be used as passive vibration control devices in several structures and machines. In the present work, the nonlinear behavior of a pendulum-tower system is studied. The tower is modeled as a bar with variable cross-section with concentrated masses. First, the vibration modes and frequencies of the tower are obtained analytically. The primary structure and absorber together constitute a coupled system which is discretized as a two degrees of freedom nonlinear system, using the normalized eigenfunctions and the Rayleigh-Ritz method. The analysis shows the influence of the geometric nonlinearity of the pendulum absorber on the response of the tower. A parametric analysis also shows that, with an appropriate choice of the absorber parameters, a pendulum can decrease the vibration amplitudes of the tower in the main resonance region. The results also show that the pendulum nonlinearity cannot be neglected in this type of problem, leading to multiplicity of solutions, dynamic jumps and instability. In order to improve the effectiveness of the control during the transient response, a hybrid control system is suggested. The added control force is implemented as a non-linear variable stiffness device based on position and velocity feedback. The obtained results show that this strategy of nonlinear control is attractive, has a good potential and can be used to minimize the response of slender structures under various types of excitation.

Modal identifiability of a cable-stayed bridge using proper orthogonal decomposition

  • Li, M.;Ni, Y.Q.
    • Smart Structures and Systems
    • /
    • 제17권3호
    • /
    • pp.413-429
    • /
    • 2016
  • The recent research on proper orthogonal decomposition (POD) has revealed the linkage between proper orthogonal modes and linear normal modes. This paper presents an investigation into the modal identifiability of an instrumented cable-stayed bridge using an adapted POD technique with a band-pass filtering scheme. The band-pass POD method is applied to the datasets available for this benchmark study, aiming to identify the vibration modes of the bridge and find out the so-called deficient modes which are unidentifiable under normal excitation conditions. It turns out that the second mode of the bridge cannot be stably identified under weak wind conditions and is therefore regarded as a deficient mode. To judge if the deficient mode is due to its low contribution to the structural response under weak wind conditions, modal coordinates are derived for different modes by the band-pass POD technique and an energy participation factor is defined to evaluate the energy participation of each vibration mode under different wind excitation conditions. From the non-blind datasets, it is found that the vibration modes can be reliably identified only when the energy participation factor exceeds a certain threshold value. With the identified threshold value, modal identifiability in use of the blind datasets from the same structure is examined.