• Research in Plant Disease
• /
• v.14 no.2
• /
• pp.117-121
• /
• 2008

To determine the economic threshold level of Meloidogyne incognita on cucumber in greenhouse conditions, cucumber seedlings(Cucumis sativa L. cv. 'Super Manchon') grafted on 'Jangsushintozoa'(Cucurbita maxima x Cu. moschata) were planted in wooden boxes($30{\times}40{\times}15cm,\;L{\times}W{\times}D$) under a plastic house in August 01 and harvested from Sep. 01-Oct. 30, 2006. The initial nematode population densities(Pi) in the wooden boxes were adjusted to 0, 10, 30, 100, 300, and 600 second-stage juveniles(J2)/100 $cm^3$ soil. The relationship of total fruit yield to Pi level could be adequately described by a linear regression equation, $Y=0.82-0.04{\cdot}Log_{10}$(Pi+1). Initial nematode densities(Pi) before planting in excess of 5 J2/1,000 $cm^3$ soil caused in total yields loss that is equivalent to the costs of granular nematicide application; Pi level in excess of 25 J2/1,000 $cm^3$ soil caused in total yields loss that exceed the costs for application of fumigants at current control costs. We propose two different management strategies depending on nematode densities, (i) application of non-fumigant granular nematicides for M. incognita Pi level of 5 J2/1,000 $cm^3$ soil and (ii) fumigant treatment with Pi level over 25 J2/1,000 $cm^3$ soil. Soil samples to determine population density of Meloidogyne spp. for advisory purposes should be taken several months before planting time, which allows a period of time enough for implementing management procedures.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.43-54
• /
• 1992

For shallow arches with large dynamic loading, linear analysis is no longer considered as practical and accurate. In this study, a method is presented for the dynamic analysis of shallow arches in which geometric nonlinearity must be considered. A program is developed for the analysis of the nonlinear dynamic behavior and for evaluation of critical buckling loads of shallow arches. Geometric nonlinearity is modeled using Lagrangian description of the motion. The finite element analysis procedure is used to solve the dynamic equation of motion and Newmark method is adopted in the approximation of time integration. A shallow arch subject to radial step loads is analyzed. The results are compared with those from other researches to verify the developed program. The behavior of arches is analyzed using the non-dimensional time, load, and shape parameters. It is shown that geometric nonlinearity should be considered in the analysis of shallow arches and probability of buckling failure is getting higher as arches are getting shallower. It is confirmed that arches with the same shape parameter have the same deflection ratio at the same time parameter when arches are loaded with the same parametric load. In addition, it is proved that buckling of arches with the same shape parameter occurs at the same load parameter. Circular arches, which are under a single or uniform normal load, are analyzed for comparison. A parabolic arch with radial step load is also analyzed. It is verified that the developed program is applicable for those problems.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.144-148
• /
• 2005

Kale leaf had similar contents of vitamin C, $NO_3$, p, Ca, Mg, and Fe with reported values. Among these internal quality factors, $NO_3$ content which has been a concern recently, ranged from 139 to 429 mg in 100 g fresh kale leaf, Kale showed high vitamin C content ranging from 106 to 203 mg in 100 g fresh leaf. The relative concentration of chlorophyll and b value color had a high correlation coefficient (r) with vitamin C, $NO_3$, Mg and Fe content. The relationship between $NO_3$ content and the relative concentration of chlorophyll was given by the following linear equation: $NO_3$ content : 21.55 + (5.907 ${\times}$ the relative concentration of chlorophyll) with an r of $0.910^{{\ast}{\ast}}$. Correlation between $NO_3$ content and b value was also very dependable (r = $-0.901^{{\ast}{\ast}}$). Vitamin C content and the relative concentration of chlorophyll showed a high correlation, r = $-0.858^{{\ast}{\ast}}$. Among internal quality factors, vitamin C content increased with decreasing $NO_3$ content and their correlation coefficient was high (r = $-0.795^{{\ast}{\ast}}$). Consequently, $NO_3$ content of kale leaf could be inferred from an external nondestructive method, such as the relative concentration of chlorophyll. We may be able to produce high quality kale leaves containing high amount of vitamin C and low content of $NO_3$ using this method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1137-1143
• /
• 2010

This paper presents a fatigue design method for plug- and ring-type gas-welded joints, which takes into account the effects of welding residual stress. To develop this method, we simulated the gas-welding process by performing nonlinear finite element analysis (FEA) To validate the FEA results, numerically calculated residual stresses in the gas welds were then compared with experimental results obtained by the hole-drilling method. To evaluate the fatigue strength of plug- and ring-type gas-welded joints influenced by welding residual stresses, the use of stress amplitude $(\sigma_a)_R$, which includes the welding residual stress in gas welds, is proposed $(\sigma_a)_R$ on the basis of a modified Goodman equation that includes the residual stress effects. Using the stress amplitude $(\sigma_a)_R$ at the hot spot point of gas weld, the relations obtained as the fatigue test results for plug and ring type gas welded joints having various dimensions and shapes were systematically rearranged to obtain the $(\sigma_a)_R-N_f$ relationship. It was found that more systematic and accurate evaluation of the fatigue strength of plug- and ring-type gas-welded joints can be achieved by using $(\sigma_a)_R$.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.3
• /
• pp.83-90
• /
• 2016

Despite the ability of biochar to enhance soil fertility and to mitigate greenhouse gas, its carbon sequestration and profit analysis with arable land application have been a few evaluated. This study was conducted to estimate carbon sequestration and to evaluate profit of greenhouse gas mitigation during corn cultivation periods. For the experiment, the biochar application rates were consisted of pig compost(non application), 2,600(0.2%), 13,000(1%), and 26,000(2%) kg/ha based on pig compost application. For predicting soil carbon sequestration of biochar application, it was appeared to be linear model of Y = 0.5523X - 742.57 ($r^2=0.939^{**}$). Based on this equation, soil carbon sequestration by 0.2, 1 and 2% biochar application was estimated to be 1,235, 3,978, and 14,794 kg/ha, and their mitigations of $CO_2$-eq. emissions were estimated to be 4.5, 14.6, and 54.2 ton/ha, respectively. Their profits were estimated at $14.6 for lowest and $452 for highest. In Korea Climate Exchange, it was estimated that the market price of $CO_2$ in corn cultivation periods with 0.2, 1 and 2% biochar application was $35.6, $115.3 and $428.2 per hectare, respectively. For the plant growth response, it was observed that plant height and fresh ear yield were not significantly different among the treatments. Therefore, these experimental results might be fundamental data for assuming a carbon trading mechanism exists for biochar soil application in agricultural practices.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.592-599
• /
• 2019

This study aimed to develop an equation for estimating stem volume for Larix kaempferiin South Korea using independent variables, diameter at breast height (DBH), and height as being closely associated with stem volume. Analysis was conducted on the growth performance of 2,840 Larix kaempferi samples across South Korea after felling them and gleaning diameter data according to both stem height and stem analyses. In order to test the fitness of six different stem taper equations, empirical assessment was conducted for fitness index (FI), bias, mean, and absolute deviation (MAD), and coefficient variation (%CV). The two selectedmodels found to be optimal were the following: model one (V=a+bDBH²), established by employing DBH only; and model four (V=a+bDBH²H), established by utilizing DBH and height, respectively. The findings of non-linear regression indicated statistical significance (p < 0.05) in a and b, which were the coefficients for the intercepts and slopes of the models. The FI of the models ranged between 94% and 99%, and the bias was close to zero, while MAD ranged from 0.01 to 0.05, and %CV from 5.97 to 14.43, indicating a high level of fitness. Thus, using the suggested models, the basic information necessary for forest management was obtained, and an estimation of the stem volume was effected without delay soon after effecting DBH and height measurements.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.1
• /
• pp.38-43
• /
• 2013

In this study we aims to examine the effects of $Co_3O_4$ and NiO doping on the defects and electrical properties in ZnO-$Bi_2O_3-Sb_2O_3$ (Sb/Bi=0.5) varistors. It seemed to form ${Zn_i}^{{\cdot}{\cdot}}$(0.20 eV) and ${V_o}^{\cdot}$(0.33 eV) as dominant defects in Co and Ni co-doped ZBS system, however only ${V_o}^{\cdot}$ appeared in Co- or Ni-doped ZBS. Even though the same defects it was different in capacitance (1.5~4.5 nF) and resistance ($0.3{\sim}9.5k{\Omega}$). The varistor characteristics were improved with Co and Co+Ni doping (non-linear coefficient, ${\alpha}$= 36 and 29, relatively) in ZBS. The various parameters ($N_d=1.43{\sim}2.33{\times}10^{17}cm^{-3}$, $N_t=1.40{\sim}2.28{\times}10^{12}cm^{-2}$, ${\Phi}b$=1.76~2.37 V, W= 98~118 nm) calculated from the C-V characteristics in our systems did not depend greatly on the type of dopant, which were in the range of a typical ZnO varistors. It should be derived a improved C-V equation carefully for more reliable parameters because the variation of the varistor capacitance as a function of the applied dc voltage is depend on the defect, frequency, and temperature.

• Geophysics and Geophysical Exploration
• /
• v.10 no.2
• /
• pp.138-146
• /
• 2007

This paper describes 2.5D induced polarization (IP) modeling and inversion algorithms using complex resistivity. The complex resistivity method has merits for acquiring more valuable information about hydraulic parameters and pore fluid than the conventional IP methods. The IP modeling and inversion algorithms are developed by allowing complex arithmetic in existing DC modeling and inversion algorithms. The IP modeling and inversion algorithms use a 2.5D DC finite-element algorithm and a damped least-squares method with smoothness constraints, respectively. The accuracy of the IP modeling algorithm is verified by comparing its responses of two synthetic models with two different approaches: linear filtering for a three-layer model and an integral equation method for a 3D model. Results from these methods are well matched to each other. The inversion algorithm is validated by a synthetic example which has two anomalous bodies, one is more conductive but non-polarizable than the background, and the other is polarizable but has the same resistivity as the background. From the inverted section, we can cleary identify each anomalous body with different locations. Furthermore, in order to verify its efficiency to the real filed example, we apply the inversion algorithm to another three-layer model which includes phase anomaly in the second layer.

• Journal of Bio-Environment Control
• /
• v.19 no.3
• /
• pp.123-129
• /
• 2010

A study on modeling of medium temperature drops of the elevated-bench hydroponic system for strawberry cultivation during low temperature season was conducted. Four different conditions were used for the experiment. These consisted of two kinds of bed types (plant, V), four kinds of medium (rice, perlite, rice hulls80% and peatmoss20%, perlite80% and peatmoss20%), two kinds of mulched bed (mulched, non mulched) and four kinds of greenhouse air temperature (l.5, 3.2, 5.0, $6.7^{\circ}C$), and the results were summarized as follows: Temperature drop of medium in the V-bed was slower than that in the plant bed, showing better insulation effect of V-bed. Temperature drop of medium with mulching on the top of the bed was slower than the case without mulching, as a result, the beneficial effect of temperature drop was appeared in mulched bed. Linear regression of the temperature descent rate and the temperature difference between medium and air showed significant correlation. The regression equation for the Pearlite80% and Peatmoss20% in the V-bed was f(x) = -0.2656 + 0.1345x at the $R^2$ of 0.9269. Using the model, the temperature drop during night can be predicted for the various media at the different depths.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.130-137
• /
• 2017

The purpose of this study is to provide a reasonable analytical method for the reinforced concrete beams which shows failure mode of shear and flexure-shear by proposing a modified formulation to consider the effect of shear deformation on the beam-column fiber element based on the flexibility method and a new constitutive law of inelastic shear response history for the section. A total of 6 specimens of reinforced concrete beams which is designed to cause shear failure before yielding longitudinal reinforcement to investigate the influence of the main experimental variables on the shear behavior characteristics and the analysis was performed by using a non-linear finite element analysis program (RCAHEST) applying the newly modified constitutive equation by the authors. The failure mode and the overall behavior characteristics until fracture are predicted appropriately for all specimens and the results are expected to be useful enough for the 3 - D analysis to carry out reliable results of large-scale and complicated structures in the future.