• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4918-4924
• /
• 2015

In this paper, we consider the capacity improvement of systems exploiting dual-polarized antennas for two-user transmission. To this end, we analyze the upper bounds of ergodic capacities for multicast and unicast data services in the systems, and propose the condition for adjusting the complex cross-polarization discriminations (XPDs) to maximize the ergodic capacities. In addition, we present the adjustment condition of the complex XPDs that can achieve spectral efficiencies close to the maximum ergodic capacities with lower system complexity. Lastly simulation results demonstrate that the systems using the proposed conditions can obtain higher spectral efficiencies than the ones employing different adjustment conditions including the exiting adjustment condition.

• Bulletin of the Korean Space Science Society
• /
• 1992.10a
• /
• pp.21-21
• /
• 1992

The X-ray binary pulsar Her X-1 was observed with Ginga on 1988 August 28 during the orbital phase of 0.76 to 0.85 at the main-on phase of the 35 day cycle. During the observations the X-ray intensity varied by a factor of five or more on a time scale as short as 30 sec, due mostly to the soft X-ray absorption in the pre-eclipse phase. From the studies of pulse profiles and energy spectra, we revealed that there exists in the dipphase an unpulsed component which is "3% of the intensity at the non-absorbed high-level. We suggest that scattering of the source continuum by the optically thin hot corona is responsible for the unpoised component. In the spectral analysis, we find that the high-state non-absorbed spectra can be fitted by a power-law without absorption, and the spectra observed in the different abgorption states by two components of a power-law with the same photon index. An iron-K emission line is required in to the cases of fitting. The estimated equivalent width of the iron line varies from 0.18 to 0.51 key according to the change in the absorption column density along the line of sight. We suggest that the fluorescent iron line arises in a cool and relatively small region, like the Alfvensur face, and may be partially intercepted by the optically thick gas cloud passing across the line of sight.1 Korea Astronomy Observatorya The Institute of Space and Astronautical Science in Japan3 Korea Advanced Institute of Science and Technology

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.105-113
• /
• 2008

In Ubiquitous Society, accurate Location Calculation of user's device is required to achieve the need of users. As the location calculation is processed by ranging between transceivers, if some obstacles exist between transceivers, NLoS(Non-line-of-Sight) components of received signal increase along with the reduction of LoS(Line-of-Sight) components. Therefore the location calculation error will increase due to the NLoS effect. The conventional location calculation algorithm has the original ranging error because there is no transformation of ranging information which degrades the ranging accuracy. The Iterative Calculation method which minimizes the location calculation error relys on accurately identifying NLoS or LoS condition of the tested channel. We employ Kurtosis, Mean Excess Delay and RMS Delay spread of the received signal to identify whether the tested channel is LoS or NLoS firstly. Thereafter, to minimize location calculation error, the proposed Iterative Calculation method iteratively select random range and finds the averaged target location which has high probability. The simulation results confirm the enhancement of the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1027-1034
• /
• 2005

IEEE802.15.4a, which is started to realize the PHY layer including high precision ranging/positioning and low data rate communication functions, requires a simple and low power consumable transceiver architecture. To satisfy this requirements, the simple noncoherent on-off keying (OOK) UWB transceiver with the parallel energy window banks (PEWB) giving high precision signal processing interface is proposed. The flexibility of the proposed system in multipath fading channel environments is acquired with the pulse and bit repetition method. To analyze the bit error rate (BER) performance of this proposed system, a noise model in receiver is derived with commonly used random variable distribution, chi-square. BER of $10^{-5}$ under the line-of-sight (LOS) residential channel is achieved with the integration time of 32 ns and signal to noise ratio (SNR) of 15.3 dB. For the non-line-of-sight (NLOS) outdoor channel, the integration time of 72 ns and SNR of 16.2 dB are needed. The integrated energy to total received energy (IRR) for the best BER performance is about $86\%$.

• Journal of Internet of Things and Convergence
• /
• v.10 no.3
• /
• pp.57-64
• /
• 2024

In this paper, we propose a Line-of-Sight (LoS)/Non-Line-of-Sight (NLoS) identification- based Human Activity Recognition (HAR) system using Channel State Information (CSI) to improve the accuracy of HAR, which dynamically changes depending on the reception environment. to consider the reception environment of HAR system, the proposed system includes three operational phases: Preprocessing phase, Classification phase, and Activity recognition phase. In the preprocessing phase, amplitude is extracted from CSI raw data, and noise in the extracted amplitude is removed. In the Classification phase, the reception environment is categorized into LoS and NLoS. Then, based on the categorized reception environment, the HAR model is determined based on the result of the reception environment categorization. Finally, in the activity recognition phase, human actions are classified into sitting, walking, standing, and absent using the determined HAR model. To demonstrate the superiority of the proposed system, an experimental implementation was performed and the accuracy of the proposed system was compared with that of the existing HAR system. The results showed that the proposed system achieved 16.25% higher accuracy than the existing system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1098-1105
• /
• 2009

In this paper, we propose an asynchronous UWB (Ultra Wide Band) Positioning scheme that can provide precise positioning performance with low complexity and low power consumption. We also present the residual test to improve the positioning performance in multipath channels having heavy NLoS (Non-Line of Sight) components. As compared to conventional ToA (Time of Arrival) positioning scheme that requires round-trip transmissions as many as the number of beacons, the proposed UWB positioning scheme effectively decrease power consumption and processing delay since a single round-trip transmission is only required. Also, as compared to conventional TDoA (Time Difference of Arrival) positioning scheme requiring precise synchronization among the beacons, asynchronous nature of the proposed scheme achieves very low system complexity. Through simulations in LoS (Line of Sight) channel models, we observe that the proposed scheme requires low system complexity, low power consumption, while providing positioning performance of almost the same accuracy as the conventional ToA and TDoA positioning schemes. In addition, the proposed scheme by employing the residual test achieves accurate positioning performance even in multipath channels having heavy NLoS components.

• Journal of Communications and Networks
• /
• v.5 no.4
• /
• pp.303-308
• /
• 2003

We present a statistical model for the path loss of ultrawideband (UWB) channels in indoor environments. In contrast to our previously reported measurements, the data reported here are for a bandwidth of 6GHz rather than 1.25GHz; they encompass commercial buildings in addition to single-family homes (20 of each); and local spatial averaging is included. As before, the center frequency is 5.0GHz. Separate models are given for commercial and residential environments and, within each category, for lineof sight (LOS) and non-line-of-sight (NLS) paths. All four models have the same mathematical structure, differing only in their numerical parameters. The two new models (LOS and NLS) for residences closely match those derived from the previous measurements, thus affirming the stability of our path loss modeling. We find, also, that the path loss statistics for the two categories of buildings are quite similar.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.5
• /
• pp.2299-2318
• /
• 2019

Location-aware networks are of great importance for both civil lives and military applications. Methods based on line-of-sight (LOS) measurements suffer sever performance loss in harsh environments such as indoor scenarios, where sensors can receive both LOS and non-line-of-sight (NLOS) measurements. In this paper, we propose a data association (DA) process based on the expectation maximization (EM) algorithm, which enables us to exploit multipath components (MPCs). By setting the mapping relationship between the measurements and scatters as a latent variable, coefficients of the Gaussian mixture model are estimated. Moreover, considering the misalignment of sensor position, we propose a space-alternating generalized expectation maximization (SAGE)-based algorithms to jointly update the target localization and sensor position information. A two dimensional (2-D) circularly symmetric Gaussian distribution is employed to approximate the probability density function of the sensor's position uncertainty via the minimization of the Kullback-Leibler divergence (KLD), which enables us to calculate the expectation step with low computational complexity. Moreover, a distributed implementation is derived based on the average consensus method to improve the scalability of the proposed algorithm. Simulation results demonstrate that the proposed centralized and distributed algorithms can perform close to the Monte Carlo-based method with much lower communication overhead and computational complexity.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.32.3-33
• /
• 2021

We present H I gas kinematics and star formation activities of NGC 6822, a dwarf galaxy located in the Local Volume at a distance of ~ 490 kpc. We perform profile decomposition of the line-of-sight velocity profiles of the high-resolution (42.4" × 12" spatial; 1.6 km/s spectral) H I data cube taken with the Australia Telescope Compact Array (ATCA). For this, we use a new tool, the so-called BAYGAUD (BAYesian GAUssian Decompositor) which is based on Bayesian Markov Chain Monte Carlo (MCMC) techniques, allowing us to decompose a line-of-sight velocity profile into an optimal number of Gaussian components in a quantitative manner. We classify the decomposed H I gas components of NGC 6822 into bulk-narrow, bulk-broad, and non_bulk with respect to their velocity and velocity dispersion. We correlate their gas surface densities with the surface star formation rates derived using both GALEX far-ultraviolet and WISE 22 micron data to examine the impact of gas turbulence caused by stellar feedback on the Kennicutt-Schmidt (K-S) law. The bulk-narrow component that resides within r25 is likely to follow the linear extension of the Kennicutt-Schmidt (K-S) law for molecular hydrogen (H2) at the low gas surface density regime where H I is not saturated.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.2
• /
• pp.77-85
• /
• 2013

this study examined hybrid Time of Arrival/Angle of Arrival (TOA/AOA) localization technique in a cellular network. Based on the linearized equations from the TOA and AOA measurements, the weighted least square (WLS) method is proposed to obtain the location estimation of a mobile station (MS) by analyzing the statistical properties of the error vector in Line of Sight (LOS) and Non-line of Sight (NLOS) environments, respectively. Moreover, the precise expression of the Cramer-Rao lower bound (CRLB) for hybrid TOA/AOA measurements in different LOS/NLOS conditions was derived when the LOS error is a Gaussian variable and the NLOS error is an exponential variable. The idea of cooperative localization is proposed based on the additional information from short-range communication among the MSs in fourth generation (4G) cellular networks. Therefore, the proposed hybrid TOA/AOA WLS method can be improved further with the cooperative scheme. The simulation results show that the hybrid TOA/AOA method has better performance than the TOA only method, particularly when the AOA measurements are accurate. Moreover, the performance of the hybrid TOA/AOA method can be improved further by the cooperative scheme.