• Advances in concrete construction
• /
• v.8 no.4
• /
• pp.311-320
• /
• 2019

In this study, the effect of cellulose nanocrystals (CNCs) on the fire resistance properties of fiber-reinforced cement composites was investigated. The main variables were CNCs content (0.4, 0.8 and 1.2vol.% compared with cement), steel fiber ratio, and exposure temperature (100, 200, 400, 600 and 800℃). The fire resistance properties, i.e., residual compressive strength, flexural strength, and porosity, were evaluated in relation with the exposure temperature of the specimens. The CNCs suspensions were prepared to composited dispersion method of magnetic stirring and ultra-sonication. CNCs are effective for increasing the compressive strength at high temperatures but CNCs do not seem to have a significant effect on flexural reinforcement. Porosity test result showed CNCs reduce the non-hydration area inside the cement and promote hydration.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.4
• /
• pp.217-222
• /
• 2007

To develop cleansing tissue composed of silicone multiple emulsions which could easily remove make-up residues and confer skin protecting effect without damaging skin, we formulated various silicone multiple emulsions and evaluated the physicochemical properties including viscosity, cleansing effect, and safety effect. Also, cleansing tissue incorporated with silicone multiple (W/Si/W) emulsion was stored for 6 months, and judged its stability through microscopes under accelerated and long-term condition. Cleansing effect was evaluated by chromameter. Skin hydration effect was determined by corneometer and incorporation effect into non-woven fabric cotton was evaluated by volunteer survey. Low viscosity ranged from 400 centipoise (cP) to 1,000 cP was obtained from a stabilized W/Si/W emulsion containing more than 10% volatile silicone. Mean diameter of fresh W/Si/W emulsion was $20{\mu}m$, but after storage for 3 months at $45^{\circ}C$, the particle size of the W/Si/W emulsion increased up to $50{\mu}m$. Both W/Si/W emulsion-incorporated cleansing tissue and commercial product showed equally good cleansing effect. In addition, skin allergies such as erythema, edema, scaling itching, stinging, burning, tightness and prickling were not observed through macroscopic examination. From the transepidermal water loss results, the cleansing tissue consisting of W/Si/W emulsion showed superior hydration effect to commercial product. In conclusion, this study suggests cleansing tissue using W/Si/W emulsion could be used for an excellent efficacy compared with commercialized cleansing tissue.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.173-177
• /
• 1995

Thermal cracks ard occured when thermal stress due to the hydration of cement exceeds the tensile strength of concrete. Since cracking causes poor durability of concrete, the effect of thermal cracking should be included for the desing and construction of massive concrete structures. In this study, an experiments are performed for the investigation of time dependent temperature and thermal stress of massive concrete structure at early ages. In order to measure temperatures and thermal stresses, concrete stress meter, embedded strain meter, non-stress meter, and thermocouples are used. Based on the analyses of measured thermal stress data, measured values by concrete stress meter are more reliable than those by embedded strain meter and non-stress meter, And measured values by concrete stress meter are compared with the calculated values by FEM program developed by DICT (DWTS2D). Calculated values by DWTS2D show good agreement with measured values.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.148-153
• /
• 1996

Concrete with ground granulated blast-furnace slag can be affected by frost attack because the reaction of hydration is slow at the early age. In this study, therefore, the freezing and thawing test has been carried out to investigate the freezing and thawing resistance on concrete with ground granulated blast-furnace slag. The freezing and thawing test has been performed on concrete a blended cement, which was substituted by ground granulated blast-furnace slag with 4 kinds of ratio (non-admixture, 20%, 40% and 60%). And also tested on concrete added the AE agents to the concrete of same mix proportion to search the improvement effects about the resistance. As a result, the freezing and thawing resistance showed a tendency of reduction in proportion to the increase of the substitution ratio. For non-AE concrete, resistances of the freezing and thawing were very poor as the durability index indicated less than 5.8%. For AE concrte, resistance of the freezing and thawing were excellent as the durability index indicated more than 80.9%.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.2
• /
• pp.97-104
• /
• 2021

This study aims to develop non-sintered cement that can replace the Portland cement by utilizing industrial by-products. As a suggestion, the physical properties of non-sintered cement mortar depending on the curing method were investigated with ground granulated blast furnace slag, class C fly ash, and class F fly ash. As a result of the study, it was found that the strength performance and absorption rate were improved through the heat treatment process after steam curing. It was confirmed through crystal phase analysis that the hydration was accelerated after heat treatment, and the bonding material formed a dense internal structure.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.4
• /
• pp.381-388
• /
• 2019

Recently, the importance of individual skin characteristic is emphasized for customized beauty products. There are many studies on the concept of the syndrome differentiation, related to individual cosmetics in Korean Medicine. However, skin characteristic according to Yin deficiency syndrome (YDS), which is associated with aging, are yet to be clarified. The objective of this study was to evaluate the skin characteristic and questionnaire of female with YDS compare to with non-YDS. 218 healthy females between 40 and 59 years of age were assessed for the skin hydration, elasticity, brightness (L^* value), redness (a^* value), pore, pigmentation, wrinkle, and sebum by Corneometerr^®, Cutometerr^®, and Janus lll. Independent t-test showed lower hydration, lower elasticity, and higher redness in the YDS group compared to the non-YDS group (all p < 0.05). There was significant difference on the facial fever, insomnia, decreased amount of urine, and skin sensitive checklist. These results suggested that using the questionnaire associated with YDS and skin characteristic could separate skin types and apply to customized beauty products.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.1
• /
• pp.25-33
• /
• 2015

In this study, initial crack index was evaluated by FEM analysis to find the crack propagation from hydration heat in precast concrete. As results, as the usage of hardening accelerator increased, initial compressive strength increased and setting time was shortened. Additionally, as amounts of hardening accelerators increased, the central temperature of concrete increased and the time to reach the highest temperature was shortened. It was demonstrated that the hardening accelerators accelerated the hydration reaction of cement, and caused the increase of hydration heat within the short period of time. Furthermore, the crack index for evaluating the heat level was performed by FEM. As results, there was no problem about the cracks, despite of the growth of initial high hydration heat. This is because of the increased tensile strength that is large enough to sustain the thermally induced-stress.

• Journal of Hospice and Palliative Care
• /
• v.9 no.1
• /
• pp.35-39
• /
• 2006

A 77-year-old female presented panperitonitis due to advanced gastric ranter during palliative care. In the case of panperitonitis following obstruction or perforation, surgical treatment is vital to avoid fatal sepsis and dehydration. However, the risk of surgery and the residual life of a patient must be carefully considered because of high mortality and complication rate in those patients with advanced disease due to the poor condition. The therapeutic value of aggressive hydration, nasogastric tube insertion, and the use of antibiotics is also questionable. Palliative surgery was not performed on this case, and she passed away peacefully in the presence of family after 4 days of palliative medical care. Here is the appropriate management for this kind of patients we would like to recommend through review of relevant references and long discussions. Firstly, we need to predict survival time using clinical variables. Secondly, considering patient status and risk of surgery, non surgical palliative care such as pain control, transient nasogastric tube insertion, and parenteral hydration is recommended. Minimal use of fluid is desirable to minimize complications such as edema and dyspnea if massive hydration in the beginning of treatment is not proved to be effective. Even though started earlier in the course of disease, discontinuation of antibiotics could be discussed with patients and their caregiver if patient status is not improved.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.4
• /
• pp.41-50
• /
• 2000

Cement-bonded particleboard is being used as outdoor siding material all over the world, because this composite particularly bears a light weight, high resistance against fire, decay, and crack by cyclic freezing and thawing, anti-shock property, and strength enhancement. Construction systems are currently changing into a frame-building style and wooden houses are being constructed with prefabrication type. Therefore, they require a more durability at outdoor-exposed sides. In this study, the cement hydration property for Korean pine particle, Japanese larch particle and face- and middle layer particles (designated as PB particle below) used in Korean particleboard-manufacturing company was investigated, and the rapid manufacturing characteristics of cement-bonded particleboard by supercritical $CO_2$ curing was evaluated. Korean pine flour showed a good hydration property, however, larch flour showed a bad one. PB particle had a better hydration property than larch flour. The addition of $Na_2SiO_3$ indicated a negative effect on hydration, however, $MgCl_2$ had a positive one. Curing by supercritical $CO_2$ fluid gave a conspicuous enhancement in the performances of cement-bonded particleboards compared to conventional curing. $MgCl_2$ 3%-added PB particle had the highest properties, and $MgCl_2$ 1%-added Korean pine particle had the second class with the conditions of cement/wood ratio of 2.7, a small fraction-screened particle and supercritical curing. On the contrary, the composition of non-hammermilled or large fraction-screened particle at cement/wood ratio of 2.2 was poorer. Also, the feasibility for actual use of 3%-added, small PB particle-screened fraction was greatest of all the conventional curing treatments. Relative superiority of supercritical curing vs. conventional curing at dimensional stability was not so apparent as in strength properties. Through the thermogravimetric analysis, it was ascertained that the peak of a component $CaCO_3$ was highest, and the two weak peaks of calcium silicate hydrate and ettringite and $Ca(OH)_2$ were present in supercritical treatment. Accordingly, it was inferred that the increased formation of carbonates in board contributes to strength enhancement.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.1
• /
• pp.25-39
• /
• 2022

This study was conducted to evaluate the manufacturing process of non-sintered cement for the safe containment of radioactive waste using low level or ultra-low level radioactive waste soil generated from nuclear-decommissioning facilities, clay minerals, and blast furnace slag (BFS) as an industrial by-product recycling and to characterize the products using mineralogical and morphological analyses. A stepwise approach was used: (1) measuring properties of source materials (reactants), such as waste soil, clay minerals, and BFS, (2) manufacturing the non-sintered cement for the containment of radioactive waste using source materials and deducing the optimal mixing ratio of solidifying and adjusting agents, and (3) conducting mineralogical and morphological analyses of products from the hydration reactions of manufactured non-sintered cement solidifier (NSCS) containing waste concrete generated from nuclear-decommissioning facilities. The analytical results of NSCS using waste soil and clay minerals confirmed none of the hydration products, but calcium silicate (CSH) and ettringite were examined as hydration products in the case of using BFS. The compressive strength of NSCS manufactured with the optimum mixing ratio and using waste soil and clay minerals was 3 MPa after the 28-day curing period, and it was not satisfied with the acceptance criteria (3.44 MPa) for being brought in disposal sites. However, the compressive strength of NSCS using BFS was estimated to be satisfied with the acceptance criteria, despite manufacturing conditions, and it was maximized to 27 MPa at the optimal mixing ratio. The results indicate that the most relevant NSCS for the safe containment of radioactive waste can be manufactured using BFS as solidifying agent and using waste soil and clay minerals as adsorbents for radioactive nuclides.