• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.132-135
• /
• 2000

A process design expert system for rotationally symmetric deep drawing products has been developed The application of the expert system to non-axisymmetric components, however, has not been reported yet. Thus, in this present study, the expert system for non-axisymmetric deep drawing products with elliptical shape was constructed by using process sequence design. The system developed in this work consists of four modules. The first one is a recognition of shape module to recognize non-axisymmetric products. The second one is three dimensional (3-D) modeling module to calculate the surface area for non-axisymmetric products. The third one is a blank design module to create an oval-shaped blank with the identical surface area. The forth one is a process planning module based on the production rules that play the best important role in an expert system for manufacturing. The production rules are generated and upgraded by interviewing with field engineers.

• The Korean Society of Law and Medicine
• /
• v.9 no.2
• /
• pp.311-338
• /
• 2008

This paper aims to introduce an overview of the regime of expert witness in the medical malpractice litigation, and to provide a plan of how to make it improved. In regard with medical expert witness, several problems, such as time-consuming procedure, non-neural and unclear opinion without reasons provided, have been pointed out for several years. Lack of skill of the court and plaintiff/defender to question the expert is one of many cause to lead to the above problems. What is questioned to the expert? Because expert witness is used in determining probability of negligence, questions to the expert should be selected on the grounds of whether or not to obtain opinions or facts sufficient to let the judge infer negligence in view of the theory of proof burden established by the Supreme Court. In addition, to avoid non-neutral and unclear opinion, it is necessary to question the expert clearly, specifically and scientifically.

• The Journal of Information Systems
• /
• v.1
• /
• pp.95-109
• /
• 1992

A number of success story about various application areas including manufacturing, accounting, finance, education, and engineering are reported. MIS professionals predicted that expert systems would improve the productivity enormously. However, the expert system revolution has not happened yet. Although not reported in the open society widely, there are failure stories of expert systems. Most of problems concerning expert system failure stem from the non-technical issues such as cognitive and psychological problems rather than the technical issues. We hypothesize that human factor principle enables designers to handle most of these non-technical problems elegantly and to improve the performance and acceptance of the expert systems. Major reasons for expert system failure and needs of human factors are discussed. Human factor guidelines to expert system make the prospects of the expert systems with human factors clear and understandable.

• Journal of Korean Society for Quality Management
• /
• v.23 no.2
• /
• pp.1-9
• /
• 1995

Two user groups, expert and non-expert, are sampled to measure the image quality of G3 facsimile. A ITU-TS tset chart No. 2 has been transmitted among some selected cities and evaluated by user groups. Their subjective evaluation to the image quality is quantified by Mean Opinion Score method. There is highly significant difference in the image quality between expert and non-expert. From modified logit model, it is concluded that there is no significance in two considered factors, the effects of the number of links and transmission time. The derived percent curves show that 80% of non-experts(90% of expert) is considering the image quality of G3 facsimile "fair, good, or excellent".

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.1
• /
• pp.26-32
• /
• 2001

An ecpert system for rotationally symmetric deep drawing products has been developed. The application for non-axisymmetric components, however, has not been reported yet. This study construsctus and expert system for non-axisymmetric motor frame which shape is classified into ellipse in deep draqing process and investigates process sequence design with elliptical shape. The developed system consists of four modules. The first is recognition of calculate surface area for non-axisymmetric products. The third is blank design module the creates an oval-shaped blank with the same surface area. The fourth is a processplanning module based on production rules that play the best important roles in an expert system for manufacturing .The production rules are generated and upgraded by interviewing field engineers. Especially, drawing coefficient, punch and die radii for elliptical shape products are considered as main design parameters. The constructed system for elliptical deep drawing product would be very useful to reduce lead time and improve accuracy for products.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1434-1445
• /
• 2000

An expert system executes the inference, based on the knowledge of specific domain. the reliability on the results of inference depends upon both the consistency and accuracy of knowledge. This is the reason why expert system requires the facilities which can practice an access to the various kinds of knowledge and maintain the consistency and accuracy of knowledge an maintain the consistency and accuracy of knowledge. This paper is to implement an expert system permitting an access of declarative and procedural knowledge in the knowledge base and in the data base. This paper is also to implement a knowledge acquisition system which adds the knowledge a only if its accuracy and consistency are maintained, after verifying the potential errors such as contradiction, redundancy, circulation, non-reachable rule and non-lined rule. In consequence, the expert system realizes a good access to the various sorts of knowledge and increases the reliability on the results of inference. The knowledge acquisition system contributes tro strengthening man-machine interface that enables users to add the knowledge easily to the knowledge base.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.3
• /
• pp.255-262
• /
• 2000

A computer-aided process planning (CAPP) system for rotationally symmetric deep drawing products has been developed. The application for non-axisymmetric components, however, has not been reported yet. Therefore, this study investigates process sequence design in deep drawing process and constructs an expert system of process planning for non-axisymmetric motor frame products with elliptical shape. The system developed consists of four modules. The first one is recognition of shape module to recognize the products. The second one is a 3-D modeling module to calculate surface area for non-axisymmetric products. The third one is a blank design module that creates an oval-shaped blank with the identical surface area. The forth one is a process planning module based on production rules that play the best important role in an expert system for manufacturing. The production rules are generated and upgraded by interviewing with field engineers. The constructed system using AutoLISP language under the AutoCAD environment is baled on the knowledge base system which is involved a lot of expert's technology. Results of this system will be provide effective aids to the designer and engineer in this field.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.1
• /
• pp.9-17
• /
• 2002

The study is insufficient on process planning of the elliptical deep drawing product. Thus, in this present study, the expert system for elliptical deep drawing products was constructed by using process sequence design. The expert system was developed to be based on the general concept of each entity. The system was developed in this work consists of sixth modules. The first one is a shape recognition module to recognize non-axisymmetric products and to generate Entity_list. The second one is three dimensional (3-D) modeling module to calculate the surface area for non-axisymmetric products. The third one is a blank design module to create suggested blanks of three shapes with the identical surface area. The fourth one is shape design module based on the production rules that play the most important role in an expert system for manufacturing. The production rules are generated and upgraded by inter- viewing field engineers, plastic theory and experiments. The fifth and sixth ones are a graphic module to visualize results of the expert system and a post module to rise user's convenience, respectively. According to constructed the expert system for process sequence design, it was possible to reduce the lead time.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.8
• /
• pp.617-628
• /
• 1989

In systematic tuning of digital STC parameters, systems with time-varying parameters and systems with time-varying delays are studied individually because of many preconditions and difficulties. In order to eliminate all these difficulties effectively, the expert control technique is required to enhance STC control functions. In this paper, an expert controller, a STC utilizing expert control technique, for process control is designed. The expert controller is composed of an unstability indicator for detecting plant unstability, an expert back-up controller and an expert STC which are switched each other by the unstability indication, and expert system with knowledge base and inference engine. This expert controller is able to perform control functions successfuly for the following` 1) a system which has unknown and time-varying delay time, 2) a time-varying system which has unknown parameters, and 3) a system with minimun and non-minimum phase. The robust control function is demonstrated by computer simulations.

• Journal of The Korean Association For Science Education
• /
• v.32 no.9
• /
• pp.1443-1451
• /
• 2012

This study aims to investigate the gaze patterns of two expert and two novice teachers in one hour of lecture type class. Teachers recruited from the same middle school conducted the class each, wearing an eye-tracker. Gaze rate and gaze movement pattern were analyzed. The scene where teachers faced in the classroom was categorized into three zones; student zone, material zone, and non-teaching zone. Student zone was divided into nine areas of interest to see the gaze distribution within the student zone. Expert teachers showed focused gaze on student zone while novice teachers' gaze rate was significantly higher at the non-teaching zone, compared to expert teachers' one. Within student zone, expert teachers' gaze spread to the rear areas, but novice teachers' one was narrowly resided in the middle areas of the student zone. This difference in gaze caused different eye movement pattern: experts' T pattern and novices' I pattern. On the other hand, both teacher groups showed the least gaze rate onto the left and right front areas. Which change is required to teachers' gaze behavior and what must be considered in order to make effective teacher gaze in the classroom setting were discussed.