• Journal of Korean Society on Water Environment
• /
• v.20 no.5
• /
• pp.494-499
• /
• 2004

Growth in population and urbanization has progressively increased the loadings of pollutants from non-point sources as well as point sources. Therefore, it is necessary to manage both point and non-point sources contaminations for protecting water environment and improving water quality. This study investigated the characteristics of pollutant release over a wide range of rainfall intensities as a requisite to control road runoff that accounts for the largest portion of non-point source contamination in urban areas. Samples of runoff rainwater collected from real road surfaces were analyzed for physicochemical parameters such as pH, suspended solids, and heavy metals. A experimental model road ($30cm{\times}30cm$) was also used to evaluate wash-off properties of pollutants deposited on the surface as functions of time and rainfall intensity. Analysis of runoff samples on rain events showed that the pollutant wash-off patterns for heavy metal and suspended solids were similar. This implies that the particles in rainwater adsorb heavy metals. Experiments using the model road made of impervious asphalt demonstrate a strong first flush phenomenon. At high rainfall intensity, approximately 80% of total pollutants were released within 15 min. The pollutant wash-off rates rapidly increase from 9 mm/hr to 12 mm/hr of rainfall intensity and decrease over 12 mm/hr of rainfall intensity.

• Smart Structures and Systems
• /
• v.15 no.6
• /
• pp.1481-1501
• /
• 2015

MR-TLCD (Magneto-Rheological Tuned Liquid Column Damper) is a new developed vibration control device, which combines the traditional passive control property with active controllability advantage. Based on traditional TLCD governing equation, this study further considers MR-fluid viscosity in the equation and by transforming the non-linear damping term into an equivalent linear damping, a solution can be obtained. In order to find a countable set of parameters for the design of the MR-TLCD system and also to realize its applicability to structures, a series of experimental test were designed and carried out. The testing programs include the basic material properties of the MR-fluid, the damping ratio of a MR-TLCD and the dynamic responses for a frame structure equipped with the MR-TLCD system subjected to strong ground excitations. In both the analytical and experimental results of this study, it is found that the accurately tuned MR-TLCD system could effectively reduce the dynamic response of a structural system.

• International Journal of Concrete Structures and Materials
• /
• v.4 no.2
• /
• pp.71-75
• /
• 2010

The chloride ion attack on the passive iron oxide layer of reinforcement steel embedded in concrete under variable temperature environment is influenced by several parameters and some of them still need to be further investigated in more detail. Different school of thoughts exist between past researchers and the data is limited in the high temperature and high chloride concentration range which is necessary with regards to setting boundary conditions for enhancement of tafel diagram model presented in this research. The objective of this paper is to investigate the detrimental coupled effects of chloride and temperature on corrosion of reinforced concrete structures in the high range by incorporating classical Tafel diagram chloride induced corrosion model and laboratory controlled experimental non-linear effect of temperature on corrosion of rebar embedded in concrete.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.191-194
• /
• 2005

Characteristics of sorption and desorption in soils affect chemical fate, soil-remediation time, and selection of remediation technology. The sorption and desorption behavior of atrazine and naphthalene on soils was studied. Six soils collected at Gwangju area were used as sorbents and the organic matter contents ranged from 1.28 to 5.21%. Sorption and desorption experiments were conducted and sorption distribution coefficients(Kd) of atrazine and naphthalene were nearly linear$(R^2=0.93{\sim}0.97)$. Desorption parameters were evaluated using three site desorption model included equilibrium, nonequilibrium and nondesorption sites. Non-desorbable site fraction for atrazine was evaluated, but for naphthalene it was not enumerated during the experimental period. Through the series dilution desorption experiments, non-desorpbable sites were observed for both chemicals.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.167.2-168
• /
• 2003

This study was performed to evaluate Quality of spring water in seoul. After the revision the guideline of water Quality control on July 2002, the ratio of non-passed samples of spring water increased evidently(2001, 24.5％$\rightarrow$2002, 37.5％). So Citizens of Seoul have been worried about what makes the difference between two years. To find out the major reason of that rapid increasement, the experimental results of standard plate count and psychrotrophilic bacteria in seoul were used. (omitted)

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.34-39
• /
• 1999

Removal of spilled oil over the sea and the river has become one of the urgent problems in these days. Removing oil using mechanical devices by adhesion method is known to be closely related with the problem of estimating the thickness of film remaining on the surface of solid withdrawn from a quiescent liquid. In the present study a series of experimental results are compared with the analytic estimation for the thickness of film remaining on the solid surface using non-dimensional analysis. For the case of pure water both results show the remarkable agreement. However, discrepancy has been found for the case of Bunker C oil and diesel oil. The analytic estimation over-predicts the experimental value for the case of Bunker C oil and under-predicts it for the case of diesel oil. Further study is required to investigate the real situation including a contact angle and the property difference between oil and water.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.302-305
• /
• 2003

The purpose of this study was to assess the effect of surfactant on the rate of NAPLs(non-aqueous phase liquids) solubilization. The experimental variables were surfactant type, NAPLs type and water type. The main experimental designs were consists of two phases. The solubilization rate is sensitive to surfactant type based on this test. Used aqueous surfactants were solubilized and removed 72.77 to 89.90% of toluene, PCE(tetrachloroethylene) from the contaminated water during the test, respectively. T60 has higher and stable recovery ratio than SDS in surfactant type but, the micelle of the T60 is more weaker than that of SDS based on this study's results. And the solubilization rate in used water type was almost same.(deionized water, surface water).

• The Plant Pathology Journal
• /
• v.21 no.1
• /
• pp.64-67
• /
• 2005

The biocontrol agent Serratia plymuthica A21-4 readily colonized on the root of pepper plant and the bacterium moves to newly emerging roots continuously. The colonization of A21-4 on the pepper root was influenced by the presence ofPhytophthora capsici in the soil. When P. capsici was introduced in advance, the population density of A21-4 on the root of pepper plant was sustained more than $10^6$ cfu/g root until 3 weeks after transplanting. On the other hand, in the absence of P. capsici, the population density of A21-4 was reduced continuously and less than $10^5$ cfu/g root at 21 days after transplanting. S. plymuthica A21-4 inhibited successfully the P. capsici population in pepper root and rhizosphere soil. In the rhizosphere soil, the population density of P. capsici was not increased more than original inoculum density when A21-4 was treated, but it increased rapidly in non-treated control. Similarly, the population density of P. capsici sharply increased in the non-treated control, however the population of P. capsici in A21-4 treated plant was not increased in pepper roots. The incidence of Phytophthora blight on pepper treated with A21-4 was 12.6%, while that of non-treated pepper was 74.5% in GSNU experimental farm experiment. And in farmer's vinyl house experiment, the incidence of the disease treated with the fungicide was 27.3%, but treatment of A21-4 resulted in only 4.7% of the disease incidence, showing above 80% disease control efficacy.

• Asian Journal of Business Environment
• /
• v.5 no.1
• /
• pp.5-11
• /
• 2015

Purpose - This study aims to explore the influence of combining "non-halal" labels with visual and textual warning labels on cigarette packages to induce the intention to quit smoking and boost the stop-smoking campaign. Research design, data, and methodology - This study examines"non-halal" labeling on cigarette packages using an experimental method. A total of 120 smokers, aged 18-23, were chosen from among Universitas Indonesia students. Data obtained were analyzed using ANOVA and T-Test. Results - The use of a "non-halal" label as a warning on cigarette packages is more effective to influence Muslim smokers to quit smoking. The results also suggest that "non-halal" labels more effectively increase intentions to quit smoking when use din combination with textual-visual labels. Conclusions - The study found that the addition of "non-halal" labels in textual or textual-visual warning labels on cigarette packages would significantly increase the intention of Moslems smokers to quit smoking. These results support previous research findings, that if cigarettes are labeled as "non-halal" (haram) products for Moslem teenagers, it will induce them to quit smoking.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.7
• /
• pp.553-559
• /
• 2012

A plate-fin heat exchanger is a type of heat exchanger widely used in air conditioners, and tubes and fins are tightly assembled by the mechanical expansion process of tubes. The tube expansion process deforms the grooves inside the tube, and the groove shapes also affect the adhesion between tubes and fins. In this study, the adhesion and heat transfer performance affected by the tube expansion of the non-uniform groove shape tube with different heights are investigated by both analysis and experiments. From the analysis method, it was shown that the contact pressure of non-uniform groove tube is higher than that of the uniform groove tube, and the most appropriate high groove number of the non-uniform groove tube is designed for the maximum contact pressure. From the experimental results, the decreasing rate of the condensation heat transfer coefficient is smaller in the non-uniform groove tube with different heights, compared to the conventional uniform groove tube. Also, the air-side heat transfer coefficient of the non-uniform groove tube with different heights is higher than that of the uniform groove tubes.