• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1199-1205
• /
• 2012

An empirical acoustic impedance model of acoustic resonators with extended neck at a high sound pressure environment is proposed. The acoustic resonator with extended neck into its cavity is appropriate for the launcher fairing application because the length of neck does not increase the total height of the resonator. This enables one to design slim and light acoustic resonators for launch vehicles. The suggested acoustic impedance model considers the incident pressure and geometric variables(the neck length, the perforation ratio and the hole diameter) in terms of non-dimensional variables. Several acoustic resonators with extended neck are manufactured and their wall impedances are measured according to the pre-defined incident pressure levels. Effects of non-dimensional variables on the non-linear acoustic impedance are investigated so that a simple non-linear impedance model for the launcher fairing application can be proposed. It is demonstrated that the estimated acoustic resistance and acoustic length correction show reasonable agreement with the measured ones within the range of design parameters for launcher fairings.

• 대한전자공학회논문지
• /
• 제26권6호
• /
• pp.89-96
• /
• 1989

본 논문에서는 영역화에 기초를 둔 영상 부호화의 한 부분인 영역 부호화의 개선에 관한 연구가 수행되었다. 영역화시 texture의 효율적인 표현을 위하여 영상을 stochastic random field로 묘사 될 수 있는 stochastic 영역과 non-stochastic 영역으로 구분한다. 영역 부호화 및 복원시 stochastic 영역에 대해서는 autoregressive model을 이용하고 non-stochastic영역은 2차원 다항식 근사화를 이용한다. 제안 방식은 2차원 다항식 근사화만을 이용한 기존 방식보다 더 좋은 주관적 화질을 가지며, 상대적인 data 감축할 수 있었고 영상의 부호화 및 복원에 필요한 수행시간을 단축시켰다.

• Korea-Australia Rheology Journal
• /
• 제12권2호
• /
• pp.107-117
• /
• 2000

Prediction of the product shape in sheet casting process is performed from the numerical simulation. A three-dimensional finite element method is used to investigate the flow behavior and to examine the effects of processing conditions on the sheet produced. Effects of inertia, gravity, surface tension and non-Newtonian viscosity on the thickness profile of the sheet are considered since the edge bead and the flow patterns in the chill roll region have great influence on the quality of the products. In the numerical simulation with free surface flows, the spine method is adopted to update the free surface, and the force-free boundary condition is imposed along the take-up plane to avoid severe singularity problems existing at the take-up plane. From the numerical results of steady isothermal flows of a generalized Newtonian fluid, it is shown that the draw ratio plays a major role in predicting the shape of the final sheet produced and the surface tension has considerable effect on the bead thickness ratio and the bead width fraction, while shear-thinning and/or tension-thickening viscosity affect the degree of neck-in.

• Archives of Plastic Surgery
• /
• 제33권2호
• /
• pp.168-174
• /
• 2006

For over two thousand years, many artists and scientists have tried to understand or quantify the form of the perfect, ideal, or the most beautiful face both in art and in vivo(life). However, this mathematical relationship has been consistently and repeatedly reported to be present in beautiful things. This particular relationship is referred to as the golden ratio. It is a mathematical ratio of 1.618 : 1 that seems to appear recurrently in beautiful things in nature as well as in other things that are seen as beautiful. Dr. Marquardt made the facial golden mask that contains and includes all of the 1-dimensional and 2-dimensional geometric golden element formed from the golden ratio. The purpose of this study is to evaluate the usefulness of the golden facial mask. In our cases(n=40), the authors applied the facial golden mask to the preoperative and postoperative photographs, and scored each photograph. Compared with the average scores of the facial mask applied photographs and none applied photographs using non-parametric test, statistical significance was not checked (p > 0.05). It means that the facial golden mask can be used for facial analysis. The facial golden mask is easy to apply, cheap and relatively objective. So, the authors introduce the one of useful facial analyses.

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.149-163
• /
• 2023

This paper presents stability evaluation of unlined tunnels with semi-circular arch and straight sides (SASS) driven in non-homogeneous and anisotropic undrained clay. Numerical analysis has been conducted based on lower bound finite element limit analysis with second order cone programming under plane strain condition. The solutions will be used for the assessment of stability of unlined semi-circular arch tunnels and tunnels in which semi-circular roof is supported over rectangular/square sections. The stability charts have been generated in terms of a non-dimensional factor considering linear variation in undrained anisotropic strength for normally consolidated and lightly over consolidated clay with depth, and constant undrained anisotropic strength for heavily over-consolidated clay across the depth. The effect of normalized surcharge pressure on ground surface, non-homogeneity and anisotropy of clay, tunnel cover to width ratio and height to width ratio of tunnel on the stability factor and associated zone of shear failure at yielding have been examined and discussed. The geometry of tunnel in terms of shape and size, and non-homogeneity and anisotropy in undrained strength of clay has been observed to influence significantly the stability of unlined SASS tunnels.

• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.849-861
• /
• 1997

In this study, the effect of hole geometry of the cooling system on the flow and temperature field was numerically calculated. The finite volume method was employed to discretize the governing equation based on the non-orthogonal coordinate with non-staggered variable arrangement. The standard k-.epsilon. turbulence model was used and also the predicted results were compared with the experimental data to validate numerical modeling. The predicted results showed good agreement in all cases. To analyze the effect of the discharge coefficient for slots of different length to width, the inlet chamfering and radiusing holes were considered. The discharge coefficient was increased with increment of the chamfering ratio, radiusing ratio and slot length to width and also the effect of radiusing showed better result than chamfering in all cases. In order to analyze the difference between the predicted results with plenum region and without plenum region, the velocity profiles of jet exit region for a various flow conditions were calculated. The normal velocity components of jet exit showed big difference for the low slot length to width and high blowing rate cases. To analyze the flow phenomena injected from a row of inclined holes in a real turbine blade, three dimensional flow and temperature distribution of the region including plenum, hole and cross stream with flow conditions were numerically calculated. The results have shown three-dimensional flow characteristics, such as the development of counter rotating vortices, jetting effect and low momentum region within the hole in addition to counter rotating vortex structure in the cross stream.

• 한국지반공학회지:지반
• /
• 제13권3호
• /
• pp.5-20
• /
• 1997

본 연구에서는 유한변형률 이론에 근거하여 3차원 압밀 지배 방정식을 유도하였다. 이 방정식은 비교적 압밀층의 두께가 두꺼운 경우, 비선형 물성치, 공극비에 따른 비선형 투수계수를 갖는 지반에 적합하다. 기존의 유한차분 수치해석 기법(FTCS)은 지배 방정식이 비선형 이며 복잡한 경우 안정된 해를 얻을 수 없기 때문에 본 연구에서는 특수 유한 차분 기법을 도입하였다. 이 수치해석 기법을 지배 방정식에 적용하면 시간에 따른 압밀량을 예측할 수 있다. 본 해석기법에 의해 구해진 값들을 윅드레인을 설치한 여러 가지 고압축성 토질에서의 실험 결과와 비교한 결과, 최종 압밀량과 시간에 따른 압말량이 잘 일치하고 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.50-53
• /
• 2008

The differential equations governing free vibrations of the elastic arches with rectangular hollow section are derived in polar coordinates, in which the effect of rotatory inertia is included. Natural frequencies is computed numerically for circular arches with both clamped ends and both hinged ends. The lowest four natural frequency parameters are reported, with the rotatory inertia, as functions of three non-dimensional system parameters: the breadth ratio, the thickness ratio and the shape ratio.

• 한국강구조학회 논문집
• /
• 제18권2호
• /
• pp.161-171
• /
• 2006

본 논문은 고정과 자유 경계의 다양한 조합을 갖는 직사각형 복합적층판의 고유진동에하고 있다. 본 연구에서는 수학적으로 완전한 특성직교다항식으로 표현되는 근사변위와 Ritz법을 이용하여 Lagrange 범함수의 정상값을 구하였다. 3차원 모델의 정확성이 무차원 진동수의 수렴도를 검토하여 이루어졌으며, 또한 기존 문헌상의 해석결과와의 비교를 통하여 진동수의 정확성을 검토하였다. 본 논문에서 제시된 3차원 진동수의 결과를 이용하여 복합적층판의 기하 및 재료에 관한 매개변수 즉, 형상비(${\mathcal{a/b}}$), 폭두께비(${\mathcal{a/h}}$), 재료의 직교이방성, 플라이 수(${\mathcal{N}}$), 섬유배향각(${\theta}$) 및 적층순서가 미치는 효과를 설명하였다.

• Journal of Chest Surgery
• /
• 제22권2호
• /
• pp.234-245
• /
• 1989

Between January 1984 and December 1986, sixty nine patients, aged 16 months to 25 years [mean age 10.05*6.40 years], underwent total correction of tetralogy of Fallot in Kyungpook national university hospital. In 66 hospital survivors, 30 patients were followed up for 12 to 48 months [mean 30.10*10.26 months]. These 30 patients were classified in two groups, TAP [transannular patch] and Non-TAP group. There were 9 patients in TAP group, and 21 in Non-TAP group. There were no significant differences between two groups in terms of age at operation, follow up duration, ACC time, and bypass time. All patients were evaluated by two dimensional echocardiography, Doppler echocardiography, standard 12-lead electrocardiography, and plain chest X-ray. Right ventricular systolic pressure, pulmonary arterial systolic pressure, pressure gradient between the right ventricle and the pulmonary artery, presence or absence of pulmonary regurgitation and its grading, fractional shortening of the left ventricle, and Qp/Qs in case of remnant ventricular septal defect were obtained by echocardiographic examination. Cardiothoracic ratio was measured by plain chest film, and ventricular dysrrhythmia was detected by electrocardiogram. Comparing the data between two groups, there was significant difference in incidence of postoperative pulmonary regurgitation [p< 0.05], 100%[9/9] in TAP group and 47.6 %[10/21] in Non-TAP group, but all the regurgitations were not severe. There were no significant differences in other comparisons, despite of higher incidence of cardiomegaly in TAP group [CT ratio: 59.3*5.3% VS 54.7*6, 4 %].