• ETRI Journal
• /
• v.46 no.3
• /
• pp.421-431
• /
• 2024

In this study, a direct position tracking method for non-circular (NC) signals using distributed passive arrays is proposed. First, we calculate the initial positions of sources using a direct position determination (DPD) approach; next, we transform the tracking into a compensation problem. The offsets of the adjacent time positions are calculated using a first-order Taylor expansion. The fusion calculation of the noise subspace is performed according to the NC characteristics. Because the proposed method uses the signal information from the previous iteration, it can realize automatic data associations. Compared with traditional DPD and two-step localization methods, our novel process has lower computational complexity and provides higher accuracy. Moreover, its performance is better than that of the traditional tracking methods. Numerous simulation results support the superiority of our proposed method.

• Journal of Biosystems Engineering
• /
• v.37 no.5
• /
• pp.319-326
• /
• 2012

Purpose: Cheese texture is an important sensory attribute mainly considered for consumers' acceptance. The feasibility of nondestructive measurements of cheese texture was explored using non-contact ultrasonic sensors. Methods: A novel non-contact air instability compensation ultrasonic technique was used for five varieties of hard cheeses to measure ultrasonic parameters, such as velocity and attenuation coefficient. Five texture properties, such as fracturability, hardness, springiness, cohesiveness, and chewiness were assessed by a texture profile analysis (TPA) and correlated with the ultrasonic parameters. Results: Texture properties of five varieties of hard cheese were estimated using ultrasonic parameters with regression analysis models. The most effective model predicted the fracturability, hardness, springiness, and chewiness, with the determination coefficients of 0.946 (RMSE = 21.82 N), 0.944 (RMSE = 63.46 N), 0.797 (RMSE = 0.06 ratio), and 0.833 (RMSE = 17.49 N), respectively. Conclusions: This study demonstrated that the non-contact air instability compensation ultrasonic sensing technique can be an effective tool for rapid and non-destructive determination of cheese texture.

• The Korean Society of Law and Medicine
• /
• v.11 no.1
• /
• pp.397-445
• /
• 2010

This thesis introduces the trends of korean courts' ruling on damages in medical malpractice cases for past 10 years. First of all, Korean courts' ruling have had a tendency to pay only non-economic damages for not taking the informed consent. If a doctor cannot get the informed consent from a patient, he compensate only non-economic damages for the infringement of self-determination rights of patient. It's enough for the plaintiff to prove the infringement of self-determination rights, if the plaintiff just want to get non-economic damages. The Korean Supreme court have ruled that if plaintiffs want to get economic damages for the infringement of self-determination rights or informed consent, plaintiffs must prove that the infringement of self-determination rights is the proximate cause of the economic damages of patient. There is another tendency for the Korean Supreme court to limit the damages in medical malpractice cases on the ground of patient's diseases' dangerousness or patient's idiosyncrasy. In the past courts often limit the damages only to 70~80% of total damages, but now a days courts mostly limit the damages to 20~30%. This thesis also introduce the Korean courts' trends about Valuing damages in personal injury actions awarded for gratuitously rendered nursing and medical care.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.861-866
• /
• 1996

The Non-Circular Gears is more advantage than other machinery using link and cam in the automation equipment. We designed Non-Circular Gears for a velocity of inequalty rotational equipment according to the variation of pressure angle, radius of curvature etc., and studied about pitch curve.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.782-783
• /
• 2006

Titinium carbide $(TiC_x)$ was produced by self-propagating high temperature synthesis (SHS) method. The morphology and non-stoichiometric number of the SHS product were observed by scanning electron microscopy and neutron diffractometry, respectively. Tubular titanium carbide with hole inside was formed with different non-stoichiometric number (x), which value increased with combustion temperature.

• Food Science and Biotechnology
• /
• v.17 no.3
• /
• pp.623-630
• /
• 2008

A non-instrumental immunochromatographic (ICG) strip-test and direct competitive enzyme-linked immunosorbent assay (DC-ELISA) for aflatoxin B1 (AFB1) determination were developed and optimized. The detection limits of ICG strip-test and DC-ELISA were 0.5 and 0.004 ng/mL, respectively, and these methods possessed a cross-reaction to aflatoxins. The results of spiked samples by both methods were coincided with the amount spiked AFB1 and the comparative analyses of 172 real samples by 2 immunoassays and high performance liquid chromatography (HPLC) showed a good agreement. Especially, the ICG strip-test is easier to perform and quicker, but less sensitivity than DC-ELISA. Both methods could analyze a high sample throughput with short time, but the sample throughput of ICG strip-test was better. Therefore, the ICG strip-test can be used as a simple, easy, non-instrumental, and fast screening technique for AFB1 determination.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.7
• /
• pp.1009-1011
• /
• 2004

In the present work a very simple, sensitive and selective spectrophotometric method for the determination of nitrite in micellar media is described. The method is based on the color reaction of nitrite with p-nitroaniline in the presence of diphenylamine in acid media. In order to remove the extraction step, Triton X-100, a non-ionic surfactant was used as micellar media. The optimum reaction conditions such as acid concentration, reagents concentration and effect of time have been studied and the analytical characteristics of the method such as limit of detection, linear range and molar absorptivity have been obtained. The interference of some anions and cations was also tested. The method was applied to the determination of nitrite in real samples.

• International Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.6-12
• /
• 2020

The precise prediction of future position of satellite depends on the accurate determination of orbit, which is also helpful in performing orbit maneuvers and trajectory correction maneuvers. For estimating the orbit of satellite many methods are being used. Some of the conventional methods are based on (i) Differential Correction (DC) (ii) Extended Kalman Filter (EKF). In this paper, Differential Evolution (DE) is used to determine the orbit. Orbit Determination using DC and EKF requires some initial guess of the state vector to initiate the algorithm, whereas DE does not require an initial guess since a wide range of bounds for the design unknown variables (orbital elements) is sufficient. This technique is uniformly valid for all orbits viz. circular, elliptic or hyperbolic. Simulated observations have been used to demonstrate the performance of the method. The observations are generated by including random noise. The simulation model that generates the observations includes the perturbation due to non-spherical earth up to second zonal harmonic term.

• Journal of Applied and Pure Mathematics
• /
• v.5 no.5_6
• /
• pp.303-313
• /
• 2023

Generalized strictly diagonally dominant matrices have a wide range of applications in matrix theory and practical applications, so it is of great theoretical and practical value to study their numerical determination methods. In this paper, we study the numerical determination of generalized strictly diagonally dominant matrices by using the properties of generalized strictly diagonally dominant matrices. We obtain a new criterion for subdivision iteration determination of the generalized strictly diagonally dominant matrices by subdividing the set of non-prevailing row indices and constructing new iteration factors for the set of predominant row indices, new elements of the positive diagonal factors are derived. Advantages are illustrated by numerical examples.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.502-507
• /
• 2003

Toward the development of practical methods for observed data oriented bispectral estimation, an automatic means for determining the smoothing bandwidth of bispectral windows is proposed, that can also provide an associated optimum bispectral estimate of stationary non-Gaussian signals, systematically only from an observed time series datum of finite length. For the conventional non-parametric bispectral estimation, the MSE (mean squared error) of the normalized estimate is reviewed under a certain mixing condition and sufficient data length, mainly from the viewpoint of the inverse relation between its bias and variance with respect to the smoothing bandwidth. Based on the fundamental relation, a systematic method not only for determining the bandwidth, but also for obtaining the optimum bispectral estimate is presented by newly introducing a MSE evaluation index of the estimate only from an observed time series datum of finite length. The effectiveness and fundamental features of the proposed method are illustrated by the basic results of numerical experiments.