• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.155-165
• /
• 2013

PURPOSES : Benefits for improvement of travel time reliability obtained from construction of new highways should be considered as a major factor in the feasibility study for highway constructions. The purpose of this study is to develop a method of estimation for the value of travel time reliability. METHODS : Highway type (urban/rural highway) and traffic flow type(interrupted/uninterrupted) was considered to estimate he value of travel time reliability. And Double-bounded Dichotomous Choice among Contingent Valuation Method(CVM) was applied to survey the willingness-to-pay of drivers when travel time reliability is improved. Finally the value of travel time reliability was estimated using the results of survey and logit model. The value of travel time reliability was estimated considering travel objectives, time constraint travel and non-time constraint travel. RESULTS: The value of travel time reliability of business trip is higher than that of non-business trip. The value of travel time reliability of time constraint travel is higher than that of non-time constraint travel. The value of travel time reliability in urban area is higher than that in rural area. CONCLUSIONS: It was concluded that the proposed method in this study is more realistic and proper to estimate the value of travel time reliability because it reflects the situations of time constraint travel and non-time constraint travel.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.70-75
• /
• 2002

It is generally applied constraint welding condition to structure manufacture in the industry field. But it is thinkable that the residual stress of the construction and specimens for experiment is different because not constraint welding but non-constraint welding are applied for experiment. To apply the constraint welding condition as the industry field and compare and evaluate the welding residual stress distribution, the TlG welding of the pure titanium was carried out under constraint and non-constraint welding conditions

• Journal of Biomedical Engineering Research
• /
• v.37 no.5
• /
• pp.161-167
• /
• 2016

Recent technological advances in sensor fabrication and bio-signal processing enabled non-constraint and non-intrusive measurement of human bio-signals. Especially, non-constraint measurement of ECG makes it available to estimate various human health parameters such as heart rate. Additionally, non-constraint ECG measurement of wheelchair user provides real-time health parameter information for emergency response. For accurate emergency response with low false alarm rate, it is necessary to discriminate quality levels of ECG measured using non-constraint approach. Health parameters acquired from low quality ECG results in inaccurate information. Thus, in this study, a machine learning based approach for three-class classification of ECG quality level is suggested. Three sensors are embedded in the back seat, chest belt, and handle of automatic wheelchair. For the two sensors embedded in back seat and chest belt, capacitively coupled electrodes were used. The accuracy of quality level classification was estimated using Monte Carlo cross validation. The proposed approach demonstrated accuracy of 94.01%, 95.57%, and 96.94% for each channel of three sensors. Furthermore, the implemented algorithm enables classification of user posture by detection of contacted electrodes. The accuracy for posture estimation was 94.57%. The proposed algorithm will contribute to non-constraint and robust estimation of health parameter of wheelchair users.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.4
• /
• pp.45-56
• /
• 2010

This paper suggests constraint data modeling based on constraint data presentation techniques to perform complex spatial database operation naturally. We were able to identify the limitation of extendibility of dimension and non-equal framework via relevant research for former schema of spatial database and query processing. Therefore we described generalized tuple of spatial data and the definition of suggested constraint data modeling. Also we selected MLPQ/PReSTO tool among constraint database prototype and compare standard functionality of ARC/VIEW. Then we design scenario for spatial operation using MLPQ/PReSTO and we suggested application effect after query processing. Based on above explanation, we were able to identify that we can process spatial data naturally and effectively using simple constraint routine on same framework via constraint data modeling.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.2
• /
• pp.78-88
• /
• 2001

In order to adopt feature-based parametric modeling, CAD/CAM applications must have a geometric constraint solver that can handle a large set of geometric configurations efficiently and robustly. In this paper, we describe a graph constructive approach to solving geometric constraint problems. Usually, a graph constructive approach is efficient, however it has its limitation in scope; it cannot handle ruler-and-compass non-constructible configurations and under-constrained problems. To overcome these limitations. we propose an algorithm that isolates ruler-and-compass non-constructible configurations from ruler-and-compass constructible configurations and applies numerical calculation methods to solve them separately. This separation can maximize the efficiency and robustness of a geometric constraint solver. Moreover, the solver can handle under-constrained problems by classifying under-constrained subgraphs to simplified cases by applying classification rules. Then, it decides the calculating sequence of geometric entities in each classified case and calculates geometric entities by adding appropriate assumptions or constraints. By extending the clustering types and defining several rules, the proposed approach can overcome limitations of previous graph constructive approaches which makes it possible to develop an efficient and robust geometric constraint solver.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.355-360
• /
• 2002

To calibrate a non-redundantly actuated parallel mechanism, one can find actual kinematic parameters by means of geometrical constraint of the mechanism's kinematic structure and measurement values. However, the calibration algorithm for a non-redundant case does not apply fur a redundantly actuated parallel mechanism, because the angle error of the actuating joint varies with position and the geometrical constraint fails to be consistent. Such change of joint angle error comes from constraint torque variation with each kinematic pose (meaning position and orientation). To calibrate a redundant parallel mechanism, one therefore has to consider constraint torque equilibrium and the relationship of constraint torque to torsional deflection, in addition to geometric constraint. In this paper, we develop the calibration algorithm fir a redundantly actuated parallel mechanism using these three relationships, and formulate cost functions for an optimization algorithm. As a case study, we executed the calibration of a 2-DOF parallel mechanism using the developed algorithm. Coordinate values of tool plate were measured using a laser ball bar and the actual kinematic parameters were identified with a new cost function of the optimization algorithm. Experimental results showed that the accuracy of the tool plate improved by 82% after kinematic calibration in a redundant actuation case.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.25-30
• /
• 2004

The magnitude of constraint effect $A_{2}$ values were experimentally estimated using displacement according to measuring positions on the non-linear elastic plastic fracture toughness estimate. For 25.4 mm thickness SS400 steel CT specimen, constraint effect $A_{2}$ values we re dependent on specimen configuration and on measured displacement near crack front. Commonly, Estimating constraint effect $A_{2}$ measuring position for displacement should be existed inside plastic region. Therefore, the ${\delta}_{5}$ method was not reliable for evaluation of constraint effect $A_{2}$ values because measuring position for displacement is in elastic region at crack growth initiation in this paper.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.211-222
• /
• 1998

Parametric design is an important modeling paradigm in CAD/CAM applications, enabling efficient design modifications and variations. One of the major issues in parametric design is to develop a geometric constraint solver that can handle a large set of geometric configurations efficiently and robustly. In this appear, we propose a new approach to geometric constraint solving that employs a graph-based method to solve the ruler-and-compass constructible configurations and a numerical method to solve the ruler-and-compass non-constructible configurations, in a way that combines the advantages of both methods. The geometric constraint solving process consists of two phases: 1) planning phase and 2) execution phase. In the planning phase, a sequence of construction steps is generated by clustering the constrained geometric entities and reducing the constraint graph in sequence. in the execution phase, each construction step is evaluated to determine the geometric entities, using both approaches. By combining the advantages of the graph-based constructive approach with the universality of the numerical approach, the proposed approach can maximize the efficiency, robustness, and extensibility of geometric constraint solver.

• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.27-33
• /
• 2011

This paper explores two articulatory characteristics of inter-consonantal coordination observed in lingual-lingual (/kt/, /ks/) and labial-lingual (/pt/) sequences. Using electromagnetic articulometry (EMMA), temporal aspects of the lip movement and lingual movement (of the tongue tip and the tongue dorsum) were examined. Three sequences (/ks/, /kt/, /pt/) were investigated in two respects: gestural overlap in C1C2 and formation duration of coronals in C2 (/t/ or /s/). Results are summarized as follows. First, in a sequence of two stop consonants gestural overlap did not vary with order contrast or a low-level motor constraint on lingual articulators. Gestural overlap between two stop consonants was similar in both /kt/ (lingual-lingual; back-to-front) and /pt/ (labial-lingual; front-to-back). Second, gestural overlap was not simply constrained by place of articulation. Two coronals (/s/ and /t/) shared the same articulator, the tongue tip, but they showed a distinctive gestural overlap pattern with respect to /k/ in C1 (/ks/ (less overlap) < /kt/ (more overlap)). Third, temporal duration of the tongue tip gesture varied as a function of manner of articulation of the target segment in C2 (/ks/ (shorter) < /kt/ (longer)) as well as a function of place of articulation of the segmental context in C1 (/pt/ (shorter) < /kt/ (longer)). There are several implications associated with the results from Korean non-assimilating contexts. First, Korean can be better explained in the way of its language-specific gestural pattern; gestural overlap in Korean is not simply attributed to order contrast (front-to-back vs. back-to-front) or a physiological motor constraint on lingual articulators (lingual-lingual vs. nonlingual-lingual). Taking all factors into consideration, inter-gestural coordination is influenced not only by C1 (place of articulation) but also C2 (manner of articulation). Second, the jaw articulator could have been a factor behind a distinctive gestural overlap pattern in different C1C2 sequences (/ks/ (less overlap) vs. /kt/ and /pt/ (more overlap)). A language-specific gestural pattern occurred with reference to a physiological motor constraint on the jaw articulator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.10
• /
• pp.1349-1353
• /
• 2013

The optimal analysis has objective functions, equality constraint functions and inequality functions. Objective functions may be used with inequality function, because occasionally variables are moved to non-analytic condition with calculating objective functions. But inequality constraint functions are very complicated problem in a optimal analysis. this paper suggest a method to solve inequality constraint functions.