• 한국전기전자재료학회논문지
• /
• 제18권7호
• /
• pp.641-646
• /
• 2005

To fabricate a single layer white organic light emitting diode (OLED), a novel non-conjugated blue emitting material PPPMA-co-DTPM copolymer was synthesized containing a perylene moiety unit with hole transporting and blue emitting ability and a triazine moiety unit with electron transporting ability. The devices were fabricated using PPPMA-co-DTPM $(PPPMA[70\;wt\%]:DTPM[30\;wt\%])$ copolymer by varying the doping concentrations of each red, green and blue fluorescent dye, by molecular-dispersing into Toluene solvent with spin coating method. In case of ITO/PPPMA-co-DTPM:TPB$(3\;mol\%):C6(0.04\;mol\%):NR(0.015\;mol\%)/Al$ structure, as they were molecular-dispersing into 30 mg/ml Toluene solvent, nearly-pure white light was obtained both (0.325, 0.339) in the CIE coordinates at 18 V and (0.335, 0.345) at 15 V. The turn-on voltage was 3 V, the light-emitting turn-on voltage was 4 V, and the maximum external quantum efficiency was $0.667\%$ at 24.5 V. Also, in case of using 40 mg/ml Toluene solvent, the CIE coordinate was (0.345, 0.342) at 20 V.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.174-174
• /
• 2006

By condensing two different functional monomers, highly fluorescent aromatic polymers were prepared to produce a conjugated- conjugated spacer-type copolymer or conjugated-non-conjugated spacer-type copolymer. As synthesized polymers were soluble in an organic solvent and showed significantly enhanced optical properties compared to its monomer. Variation in the monomer composition afforded polymers having multifunctionaility such as photochromic-fluorescent polymers. Transparent thin films of the polymer as a solid medium were prepared using spin coating method and fabricated as a photoswitch, which showed photo-induced conductivity switching properties depending on the core monomeric unit in the polymers.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.675-679
• /
• 2004

The existing conjugated blue emitting material polymer which has been used for the two-wavelength method white-emission has good stability and low operating voltage as merits, but the imbalanced carrier transport has been indicated as problem area. We have introduced a novel blue emitting material having perylene moiety unit with hole transporting ability and blue emitting property and triazine moiety unit with electron transporting ability into the same host chain. We have synthesized N-[p-(perylen-3-y1)pheny1]methacry1 amide (PPMA) monomer and [N-(2,4-dipheny1-1,3,5-triazine)pheny1 methacry1 amide] (DTPM) monomer having blue light-emitting unit and electron transport unit, respectively by three steps. A novel non-conjugated blue emitting material Poly[N -[p­(perylene-3-y1) pheny1] methacry1 amide-co-N-[P-(4,6-dipheny1-1,3,5-triazine-2-y1]pheny1]methacry1 amide] (PPPMA-co-DTPM) copolymer having electron transporting unit was synthesized by the solution polymerization of PPMA and DTPM monomers with an AIBN initiator and showed high yield of $75{\%}$. It was very soluble in common organic solvents, and the fabrication of the thin film using a spin coating method was very simple. The PPPMA exhibited a good thermal stability.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.97-102
• /
• 2002

The mixtures of non-conjugated dienes, 4-methyl-1,4-hexadiene and 5-methyl-1,4-hexadiene (MHD), were successfully synthesized by the reaction of isoprene with ethylene using Fe(III)-based catalyst in toluene. The conversion was over 96 mol% on the basis of the initial amount of isoprene used. The production yield for MHD was nearly 50 mol%, the other was polyisoprene. The mixtures were successfully copolymerized with ethylene by using zirconium-based metallocenes. The products were characterized by the combinations of gas chromatography, high temperature gel permeation chromatography, $^1$H NMR, $^{13}$ C NMR, high temperature $^1$H NMR, UV/visible spectroscopy, and differential scanning calorimetry. It was found that 5-methyl-1,4-hexadiene was active enough to be incorporated into the copolymer chain but the corresponding isomeric material,4-methyl-1,4-hexadiene, was inactive in metallocene-catalyzed copolymerizations. Specifically, in the zirconocene-catalyzed copolymerizations of ethylene with MHD, ansa-structure catalysts seem to be more efficient than non-bridged type zirconocene. The degree of incorporation of MHD in the resulting copolymers was able to be controlled by the amount of non-conjugated dienes used initially.

• 폴리머
• /
• 제30권6호
• /
• pp.512-518
• /
• 2006

양친성 블록공중합체는 생분해성 고분자인 poly((R)-3-hydroxybutyrie acid), PHB와 친수성 고분자인 poly(ethylene glycol), PEG를 이용하여 제조되었다. 미생물에 의해 생산된 분자량이 수십만인 PHB는 약물전달용 재료로 적합하지 않으므로 산 촉매 가수분해를 통해 분자량이 $3000{\sim}30000$을 가지도록 조절되었다. 공중합체를 수용액에 넣으면, 고분자들은 자기 조립에 의해 친수성인 PEG가 소수성인 PHB를 감싸는 형태의 고분자 미셀을 형성한다. 형성된 고분자 미셀은 생분해성과 생체적합성을 가지면서 생체 내에서 낮은 독성과 환자 친화적인 특성을 가지므로 약물 전달체로의 이용이 가능하다. 양친성 블록 공중합체는 PHB에 PEG를 도입한 것으로 에스테르교환(transesterification) 반응을 통해 유도되었다. PEG는 친수성 블록의 형성과 반응성을 향상시키기 위해 말단의 작용기를 개질한 후 사용되었다. 양친성 블록 공중합체 형성에 대한 열적 특성과 화학적 구조 분석은 DSC, FTIR, $^1H-NMR$을 사용하여 알아보았다. 임계 미셀 농도(critical micelle concentration, CMC)는 고분자 미셀이 형성되는 시점으로 형광 분광기를 사용하여 분석한 결과 $5{\times}10^{-5}g/L$ 부근에서 측정되었다. 수용액 상의 고분자 미셀은 냉동 건조 후, 분말형태의 나노입자를 얻었다. 고분자 미셀의 크기는 dynamic light scattering으로 측정한 결과 약 130 nm 정도로 나타났다. 또한 atomic force microscopy 측정을 통해 크기가 약 130 nm 정도인 구형 입자를 확인하였다. 나노입자가 형성된 고분자 미셀은 소수성 약물을 담지하여 수동적 표적지향형 약물 전달용 수송체로 이용이 가능할 것이다.

• 폴리머
• /
• 제28권5호
• /
• pp.367-373
• /
• 2004

발광체로 페릴렌기와 전자 전달체로 트리아진기를 측쇄로 가지는 새로운 비공액계 청색 발광 공중 합체를 합성하였다. 제조한 공중합체는 클로로벤젠, THF 클로로포름, 벤젠과 같은 일반 유기 용매에 매우 잘 녹았다. 전도성 투명 전극 (ITO)/공중합체 /알루미늄으로 구성된 단층형 유기 발광 소자는 공중합체에서 트리아진의 함유량이 $30\%$일 때 캐리어 균형이 잘 맞았고 최고의 외부 양자 효율 ($0.003\%$)을 나타내었다. 특히 위에서 제작한 유기 발광 소자는 페릴렌 발광체에 상응하는 청색 발광 (479 nm)을 나타냈다. 구동 전압은 5V로 매우 낮았고, 색 좌표는 X 값이 0.16, Y 값이 0.17이었다.