• 제목/요약/키워드: Non-asbestos fiber

검색결과 17건 처리시간 0.022초

포항지역 부검 폐조직에서 석면과 비석면 섬유농도에 관한 연구 (Asbestos and Non-Asbestos Fiber Content in Lungs of Autopsied Subjects in Pohang with no Known History of Occupational Asbestos Exposure)

  • 임현술;김동훈;사카이 기요시;히사나가 나오미;김지용
    • Journal of Preventive Medicine and Public Health
    • /
    • 제33권4호
    • /
    • pp.477-483
    • /
    • 2000
  • Objectives : To obtain reference values for the pulmonary asbestos and non-asbestos fiber contents of residents in Korea and to compare them with similar results from Japan. Methods : The autopsied lung specimens from 22 deceased people (20 males and 2 females) in Pohang, without any known occupational history of asbestos exposure, were analyzed for incidence of asbestos and non-asbestos fibers by transmission electron microscopy with energy dispersive X-ray analysis after using low temperature ashing procedures. Results : Chrysotite fiber (46.2%) was the major fiber type found in the lungs of the subjects. The asbestos fiber concentrations found in males and females were $0.09\times10^6$ fiberss(g of dry lungs) and $0.30\times10^6$ fibers/(g of dry lungs), respectively, showing a geometric mean concentration $0.09\times10^6$ fibers/(g of dry lung tissue), due to the predominance of males in the sample. The non-asbestos fiber contents in males and females were $4.61\times10^6$ fibers/(g of dry lungs) and $17.79\times10^6$ fibers/(g of dry lungs), respectively, with a geometric mean concentration $5.21\times10^6$ fibers/(g of dry lung tissue). Conclusions : Residents in Pohang had significantly lower levels of both asbestos and non-asbestos fibers than urban residents in Korea. Furthermore, Koreans had significantly lower levels of both asbestos and non-asbestos fibers than Japanese.

  • PDF

다중이용시설 및 학교 교사내 실내공기중 섬유상 입자의 농도 특성 (Characterizations of Airborne Fiber Particle Concentrations in Public Facilities and Schools)

  • 박정호;서정민
    • 한국환경과학회지
    • /
    • 제19권4호
    • /
    • pp.509-516
    • /
    • 2010
  • This study was investigated the characteristics of indoor air concentration of fiber particles in 30 public facilities and 245 schools by PCM (phase contrast microscopy). Also SEM/EDX (scanning electron microscope / energy dispersive using X-ray analysis) was used to obtain physicochemical information of asbestos fiber and to classify asbestos and non-asbestos of fiber particles. The airborne concentrations of fiber particles were $0.0009\pm0.0009$ counts/mL in public facilities and $0.0012\pm0.0006$ counts/mL in schools by PCM. All the samples were satisfied with the IAQ (indoor air quality) level of 0.01 counts/mL. In classification of 4 type shapes, over 80% of the fiber particles were identified as single fiber type. And this study analysed airborne fiber particles in 4 sites for identifying asbestos of by SEM/EDX. The asbestos fibers in most samples could not be found.

경남지역의 실내외 공기 중 총섬유 입자의 농도특성 및 석면 입자의 확인 (Concentration Characteristics of Indoor and Outdoor Airborne Total Fiber Particles and Identification of Asbestos in Gyeongnam Provinces)

  • 박희은;박정호;김형갑
    • 한국산업보건학회지
    • /
    • 제22권2호
    • /
    • pp.119-127
    • /
    • 2012
  • Objectives: The aim of this study is to identify concentration characteristics of indoor and outdoor airborne total fiber particles and asbestos in Gyeongnam Provinces. Methods: This study investigated concentration characteristics of indoor fiber particles from 748 schools and 38 public facilities as well as outdoor particles from 11 sites through PCM (phase contrast microscope). SEM/EDX (scanning electron microscope/energy dispersive using X-ray analysis) was used to obtain physicochemical information of asbestos fiber particles. The study identified asbestos rate in the 15 samples from indoor and outdoor airborne total fiber particles. Results: 1. The average indoor airborne concentrations of total fiber particles were $0.0011{\pm}0007$ f/cc in schools and $0.0015{\pm}0007$ f/cc in public facilities by PCM. Over 90% of the fiber particles were identified as single fibers. 2. The average outdoor airborne concentrations of total fiber particles were $0.0007{\pm}0002$ f/cc, and they were lower than those of indoor airborne concentrations. 3. The results showed that the form of asbestiform was diverse as skein of thread like form and long needle, which was relatively narrower than that of glass fiber and rock wool. 4. The results of SEM/EDX analysis of 15 areas where total fiber particle was relatively high showed that the form was rather similar to that of asbestos, but chemical composition was proven to be non-asbestos. Conclusions: The concentration of indoor and outdoor airborne total fiber particles of Gyeongnam Provinces satisfied the IAQ (Indoor air quality) level of 0.01 f/cc and asbestos was not found in most of the samples by SEM/EDX.

석면 분석방법에 대한 고찰 (Review on asbestos analysis)

  • 함승헌;황성호;윤충식;박동욱
    • 한국산업보건학회지
    • /
    • 제19권3호
    • /
    • pp.213-232
    • /
    • 2009
  • This document was prepared to review and summarize the analytical methods for airborne and bulk asbestos. Basic principles, shortcomings and advantages for asbestos analytical instruments using phase contrast microscopy(PCM), polarized light microscopy(PLM), X-ray diffractometer (XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM) were reviewed. Both PCM and PLM are principal instrument for airborne and bulk asbestos analysis, respectively. If needed, analytical electron microscopy is employed to confirm asbestos identification. PCM is used originally for workplace airborne asbestos fiber and its application has been expanded to measure airborne fiber. Shortcoming of PCM is that it cannot differentiate true asbestos from non asbestos fiber form and its low resolution limit ($0.2{\sim}0.25{\mu}m$). The measurement of airborne asbestos fiber can be performed by EPA's Asbestos Hazard Emergency Response Act (AHERA) method, World Health Organization (WHO) method, International Standard Organization (ISO) 10312 method, Japan's Environmental Asbestos Monitoring method, and Standard method of Indoor Air Quality of Korea. The measurement of airborne asbestos fiber in workplace can be performed by National Institute for Occupational Safety and Health (NIOSH) 7400 method, NIOSH 7402 method, Occupational Safety and Health Administration (OSHA) ID-160 method, UK's Health and Safety Executive(HSE) Methods for the determination of hazardous substances (MDHS) 39/4 method and Korea Occupational Safety and Health Agency (KOSHA) CODE-A-1-2004 method of Korea. To analyze the bulk asbestos, stereo microscope (SM) and PLM is required by EPA -600/R-93/116 method. Most bulk asbestos can be identified by SM and PLM but one limitation of PLM is that it can not see very thin fiber (i.e., < $0.25{\mu}m$). Bulk asbestos analytical methods, including EPA-600/M4-82-020, EPA-600/R-93/116, OSHA ID-191, Laboratory approval program of New York were reviewed. Also, analytical methods for asbestos in soil, dust, water were briefly discussed. Analytical electron microscope, a transmission electron microscope equipped with selected area electron diffraction (SAED) and energy dispersive X-ray analyser(EDXA), has been known to be better to identify asbestiform than scanning electron microscope(SEM). Though there is no standard SEM procedures, SEM is known to be more suitable to analyze long, thin fiber and more cost-effective. Field emission scanning electron microscope (FE-SEM) imaging protocol was developed to identify asbestos fiber. Although many asbestos analytical methods are available, there is no method that can be applied to all type of samples. In order to detect asbestos with confidence, all advantages and disadvantages of each instrument and method for given sample should be considered.

석면과 건강에 대한 이슈 (Critical Issues on Health Risk of Asbestos)

  • 윤충식
    • 한국환경보건학회지
    • /
    • 제35권5호
    • /
    • pp.426-432
    • /
    • 2009
  • Asbestos is a commercial term of natural occurring silicated minerals and forms long, thin fibers. Chrysotile, the serpentine asbestos, accounts for most use in commercial use. Asbestos is well known health hazard material and it is proved that inhalation of asbestos fibers leads to increased risk of developing several diseases such as lung cancer, mesothelioma, asbestosis. In these days, people most at risk for exposure are maintenance and construction workers and general citizens who are working on and close to the work area at which asbestos containing material is disturbing. Non asbestiform, though its chemical composition is same with regulated asbestos, is known to be less hazardous than asbestiform. Exposure guideline, 0.01 f/ml, is not safe level in terms of health risk. It is reasonable to take preventable action when asbestos is suspicious. In Korea, it is necessary to clarify the concept between hazard and risk, to differentiate asbestiform from non asbestiform, to make regulations for compensation for asbestos related patients, to manage future exposure for general citizens.

전문가시스템을 이용한 석면 및 비석면의 분류 및 확인 (Classifying and Identifying Asbestos and Non-Asbestos Fibers by a Rule Building Expert System)

  • 최영아;이태정;김동술
    • 한국대기환경학회지
    • /
    • 제24권3호
    • /
    • pp.346-356
    • /
    • 2008
  • Asbestos is the name of a group of minerals with long and thin fibers that originate naturally in the environment. Asbestos mainly affects lungs and the membrane that surrounds the lungs. In general, PCM (phase contrast microscopy) and PLM (polarized light microscopy) have been used to analyze asbestos fibers. However, these methods have often problems to over-estimate number concentration when counting real asbestos fibers. Moreover, there are many difficulties when separating and identifying various asbestos and non-asbestos fibers. In order to determine quantitative information on fibrous particles, source profiles for asbestos and non-asbestos fibers must be initially developed on the basis of their chemical compositions and physical parameters. In our study, a SEM/EDX was used to develop source profiles from known asbestos samples as reference samples. We could make the source profile matrix consisting of 6 types of asbestos fibers and 2 types of non-asbestos fibers by analyzing 380 fibers. Based on these profiles, a rule building expert system was developed by using the visual basic application (VBA). Various fibers were successfully classified by 2 simple rules in the EXCEL environment based on several visual steps such as inserting data, viewing results, and saving results. For a case study to test the expert system, samples from a construction materials and from various indoor environments such as a residental area, a preschool classroom, and an underground store were collected and analyzed. As a result of the survey, a total of 76 individual test fiber particles was well classified into 5 different types of particle classes; 9.3% of chrysotile, 15.4% of amosite, 0.8 of crocidolite, 4.2% of tremolite, 5.8% glass fiber, 21.1% of other fibers, and 43.5% of unknown fibers in terms of number concentration. Even though unknown portion was high, it will be decreased markedly when expanding fiber source profiles.

대형건물내 비고형 석면함유 건축자재에 의한 기중 석면오염 및 관리실태 (Asbestos Content in Friable Sprayed-on Surface Material and Airborne Fiber Concentrations in Commercial Buildings)

  • 김현욱
    • 한국산업보건학회지
    • /
    • 제5권2호
    • /
    • pp.137-146
    • /
    • 1995
  • Twenty(20) large commercial buildings located in Seoul with friable sprayed-on surface insulation material on ceilings were investigated for asbestos content in bulk material by polarized light microscopy and for airborne fiber concentrations in buildings by phase contrast microscopy. In addition, such building-related variables as building age, numbers of traffic, airflow, surface conditions of the ceiling, temperature, and humidity were studied for any correlation with airborne fiber concentrations. The results were as follows: 1. Chrysotile asbestos was found in two bulk samples with 3-5% content and with <1%in one sample out of total 20 bulk samples collected. Glass fiber and mineral wool were the two major constituents of the bulk samples. 2. The ceiling surfaces were very friable in 16 buildings and were relatively hard in 4 buildings. The friability of the surface material was dependent upon the type and the amount of binder that had been mixed with the sprayed-on surface material. 3. Airborne fiber concentrations were log-normally distributed and the geometric mean(geometric standard deviation) fiber concentrations in the underground parking lots, inside buildings, and outdoor ambient air were 0.0063(1.97)f/cc, 0.0068(2.29)f/cc, and 0.0033(2.36)f/cc, respectively. 4. No significant relationship of airborne fiber concentrations and all building-related variables studied except humidity was found. The results of this study suggest that the sprayed-on surface insulation material found in some commercial buildings may possibly be contaminated with asbestos. Since most of the ceiling surfaces surveyed were very friable and poorly maintained and the airborne fiber concentrations were relatively high, there is a possibility of asbestos fiber contamination in these buildings, particularly at those buildings with asbestos-contaminated surface material. Since poorly maintained surface conditions were thought to be a source of high airborne fiber concentrations, there is a urgent need of a systematic operation and maintenance program. Further study of non-occupational asbestos exposure in general population utilizing advanced analytical technique such as transmission electron microscopy is highly recommended.

  • PDF

고온에서 비석면 마찰재의 마찰$cdot$마모특성 (Frictional and Wear Characteristics of Non-Asbestos Materials at Elevated Temperature)

  • 안병길;최웅수;권오관
    • Tribology and Lubricants
    • /
    • 제7권2호
    • /
    • pp.61-66
    • /
    • 1991
  • The frictional and wear characteristics of non-asbestos friction materials made of four different fibers (carbon, aramid, ceramic and glass) have been investigated at elevated temperature using High Frequency Friction Tester. On the basis of the experimental results, friction and wear phenomena of four different non-asbestos fibers were caused by lattice layer film of carbon, polymeric transfer film of aramid, abrasion of ceramic and adhesion of glass fiber under each contact junction. The surface analysis of the worn specimens and counter parts after tests were observed using Scanning Electron Microscope and Optical Microscope.

사문석 채석장과 제철소 내 사문석 취급 근로자의 공기 중 석면 노출 평가 (Occupational Exposure to Airborne Asbestos Fibers in Serpentine Quarries and a Steel Mill)

  • 권지운;서회경;김갑배;정은교
    • 한국산업보건학회지
    • /
    • 제23권1호
    • /
    • pp.35-40
    • /
    • 2013
  • Objectives: Asbestos contents of crushed serpentine rocks and airborne fiber concentrations of workers were determined at two serpentine quarries and a steel mill. Methods: Bulk samples of uncrushed and crushed serpentine rocks were collected and analyzed by PLM and TEM. Airborne asbestos samples were collected from the breathing zone of workers and the vicinity of working area and analyzed by PCM and TEM. Results: Chrysotile was identified with antigorite, lizardite and non-asbestiform actinolite in bulk samples. The arithmetic means of chrysotile contents in crushed serpentines were 0.11, 0.01, 0.42%(W/W) by quarry A, quarry B and a steel mill, respectively. The asbestos concentrations of all personal samples were less than 0.1 f/cc which is the permissible exposure limit of workers in Korea. The arithmetic means of airborne asbestos concentrations were 0.017 f/cc and 0.009 f/cc in personal samples collected from two serpentine quarries. The asbestos concentrations of all personal samples collected from a steel mill were less than LODs by PCM analysis but asbestos was detected in area samples by TEM. By the job tasks of serpentine quarries, crusher/separator operation generated the highest exposure to airborne asbestos. Conclusions: Although chrysotile contents in crushed serpentines of quarries were less the permissible level, the highest exposure of workers in serpentine quarries reached up to 76% of the permissible level of airborne asbestos. There were also possibilities of occupational exposure to airborne asbestos in a steel mill. The present exposure study should encourage further survey and occupational control of quarries producing serpentine or other types of asbestos-bearing rocks.

충남 서부 사문석 광산 인근에서의 석면 산출 특성: 홍성 및 비봉광산을 중심으로 (Characteristics of Asbestos Occurrence in the Vicinity of Serpentine Mines in the Western Part of Chungnam: A Study Based on the Hongseong and Bibong Mine Areas)

  • 송석환
    • 광물과 암석
    • /
    • 제36권4호
    • /
    • pp.233-257
    • /
    • 2023
  • 충남 서부 홍성 및 비봉 사문석 광산의 암석 및 토양에는 석면이 산출된다. 이 지역은 기반암인 선캠브리아기의 편마암류 및 변성퇴적암류가 있고, 이들 암체를 관입하는 중생대의 화성암류, 그리고 시대 미상의 편마암류, 중생대 퇴적암류로 구성되어 있다. 상세한 지질조사와 더불어 사문암과 각섬암 시료를 채취하였고, 석면으로 추정되는 부분에서 광물시료도 채취하였다. 이들 중 대표시료에 대해 PLM, XRD, SEM, EPMA 분석을 실시하였다. 사문암은 급경사 단층으로 인접한 편마암 및 변성퇴적암과 NNE 방향을 이루며 발견되고 있고, 반복적인 사문암화와 활석화 작용이 사문암의 정치 방향에 따라 발생하였다. 각섬암은 선캠브리아기의 복합체내에서 관입암 또는 층상으로 산출된다. 사문암 및 각섬암에서 각섬석은 석면형 또는 비석면형으로 산출된다. 사문암들은 백석면과 트레모라이트 석면, 악티노라이트 석면을 포함하는데, 이 석면들은 단구, 벽개, 층상면을 따라 발견이 되고 산출상은 교차, 미끄럼, 덩어리 형이다. 각섬암들에는 트레모라이트 석면, 악티노라이트 석면이 덩어리 형으로 산출된다. 전체적인 결과 사문석 광산에서 온 암석들은 사문석계와 각섬석계 석면을 포함하며 이는 열수의 변질에 기인 한 것이다. 광산 지역의 건설상황 및 석면의 환경적 위해성을 고려시 추가적인 토지 관리 방안이 필요하다.