• 한국산림과학회지
• /
• 제105권4호
• /
• pp.505-509
• /
• 2016

본 연구는 현재 수목관리 현장에서 사용 중인 상처도포제의 유효성을 확인하기 위해 실시하였다. 티오파네이트메틸 도포제(상표명: 톱신페스트)는 은행나무, 느티나무, 왕벚나무에서, 라놀린은 느티나무와 왕벚나무에서, 테부코나졸 도포제(상표명: 실바코)는 왕벚나무에서 각각 무처리구 대비 유의하게 높은 상처유합률을 나타냈다. 페트롤리움젤리(상표명: 바셀린)는 은행나무, 느티나무, 왕벚나무 등 소나무를 제외한 전 수종에서, 인체 무독성 접착제(상표명: 오공본드)는 느티나무에서 각각 무처리구보다 유의하게 낮은 상처유합률을 보였다. 특히 바셀린을 처리한 느티나무와 왕벚나무 상처부위에서는 형성층이 괴사되어 상처가 확대되는 피해가 발생하였다. 소나무는 수지 유출로 인해 상처도포제 처리효과가 나타나지 않았다.

• Applied Microscopy
• /
• 제26권3호
• /
• pp.277-291
• /
• 1996

The structures of the egg envelope in fertilized eggs of three species of characidae, head and tail light fish (Hemigrammus ocellifer), black tetra (Gymnocorymbus ternetzi), and buenos aires tetra (Hemigrammus caudovittatus) were studied using light and electron microscopes. The fertilized eggs in all species were colorless, transparent, spherical and non-floted type. The egg envelopes have a single micropyle resembling the pathway of sperm in the area of the animal pole. The micropyle was surrounded by protruded lines of the egg envelope in a radiated form. Egg envelopes of fertilized eggs in both head and tail light fish and buenos aires tetra consisted of three distinct layers; an outer layer, a middle layer and an inner layer. And that of blacktetra consisted of two layers; an outer layer and an inner layer. Also, an outer layers of both head and tail light fish and black tetra were adhesive types but, in that of buenous aires tetra was non-adhesive type. An outer surface of egg envelope in black tetra was arranged by pores regularly. In that of head and tail light fish and buenos aires tetra have a rough side. An inner layer of egg envelope in fertilized eggs consisted of lamellae alternating with interlamellae of lower electron density; an inner layer of fertilized eggs in head and tail light fish consisted of three layers, that of black tetra was four layers, and that of buenos aires tetra was five layers.

• 마이크로전자및패키징학회지
• /
• 제13권2호
• /
• pp.21-26
• /
• 2006

NCA의 물성이 미세피치 Chip on glass (COG) 접합부의 신뢰성에 미치는 영향을 연구하였다. Si 위에 Sn을, 유리기판 위에 In을 열증발 방법으로 증착하고 lift-off 방법을 이용하여 $30{\mu}m$ 피치를 가지는 솔더범프를 형성하였으며 열압착 방법으로 $120^{\circ}C$에서 In 범프와 Sn 범프를 접합하였다. 접합할 때 세 종류의 Non conductive adhesive (NCA)를 적용하였다. 신뢰성은 $0^{\circ}C$와 $100^{\circ}C$ 사이로 열충격시험을 2000회까지 실시하여 평가하였다. 4단자 저항측정법을 이용하여 접합부의 저항을 측정하였다. 필러의 양이 증가할수록 열충격시험 후 접합부의 저항이 가장 적게 증가하여 신뢰성이 우수하였다. 필러의 양이 증가할수록 NCA의 열팽창이 작아지기 때문이다.

• The Journal of Advanced Prosthodontics
• /
• 제3권3호
• /
• pp.119-125
• /
• 2011

PURPOSE. The aim of this study was to evaluate the influence of resin cement thickness on the microtensile bond strength between zirconium-oxide ceramic and resin cement. MATERIALS AND METHODS. Thirty-two freshly extracted molars were transversely sectioned at the deep dentin level and bonded to air-abraded zirconium oxide ceramic disks. The specimens were divided into 8 groups based on the experimental conditions (cement type: Rely X UniCem or Panavia F 2.0, cement thickness: 40 or 160 ${\mu}m$, storage: thermocycled or not). They were cut into microbeams and stored in $37^{\circ}C$ distilled water for 24 h. Microbeams of non-thermocycled specimens were submitted to a microtensile test, whereas those of thermocycled groups were thermally cycled for 18,000 times immediately before the microtensile test. Three-way ANOVA and Sheffe's post hoc tests were used for statistical analysis (${\alpha}$=95%). RESULTS. All failures occurred at the resin-zirconia interface. Thermocycled groups showed lower microtensile bond strength than non-thermocycled groups (P<.001). Differences in cement thickness did not influence the resin-zirconia microtensile bond strength given the same resin cement or storage conditions (P>.05). The number of adhesive failures increased after thermocycling in all experimental conditions. No cohesive failure was observed in any experimental group. CONCLUSION. When resin cements of adhesive monomers are applied over air-abraded zirconia restorations, the degree of fit does not influence the resin-zirconia microtensile bond strength.

• Restorative Dentistry and Endodontics
• /
• 제28권6호
• /
• pp.498-503
• /
• 2003

The purpose of this study was to evaluate the rewetting effect of water-based primer on the air-dried dentin. In this in vitro study, freshly extracted non-caries human molars and three-step adhesive system(SBMP) were used. Freshly extracted non-caries human molars and three-step adhesive system(SBMP) were used. Flat occlusal dentin surface were prepared using low-speed diamond saw, Prepared teeth were randomly divided into three groups. Group 1.(W): etched(35% phosphoric acid for 15s) and blot-dried, Group 2.(5D): 5s air-dried, Group 3.(30D): 30s ail-dried, To obtain color contrast in CLSM observation, primer was mixed with rhodamine B and bonding resin was mixed with fluorescein. Microscopic sample of each group were obtained after longitudinal section. Morphological investigation of resin-dentin interface and thickness of hybrid layer measurement using CLSM were done. Microtensile bond strength for each specimen was measured. Specimen were observed under microscope to examine the failure patterns of interface between resin and dentin. The results of this study were as follows: 1. The results(mean) of Thickness of hybrid layer were W:19.67, 5D:20.9, 30D:10$\mu\textrm{m}$. Only 30D had statistically significant differences to Wand 5D(P<0.05). 2. The results(mean) of Microtensile bond strength were W:16.02, 5D:14.69, 30D:11.14MPa. Only 30D had statistically significant differences to Wand 5D(P<0.05). 3. There were positive correlation between Thickness of hybrid layer and microtensile bond strength(P<0.05).

• 청정기술
• /
• 제22권3호
• /
• pp.203-207
• /
• 2016

Here, we report a novel fabrication technique for patchable organic lasing sheet based on non-volatile liquid organic semiconductors and freestanding polymeric film with high flexibility and patchability. For this work, we have fabricated the second-order DFB grating structure, which leads to surface emission, embedded in the freestanding polymeric film. Using an ultra-violet (UV) curable polyurethaneacrylate (PUA) mixture, the periodic DFB grating structure can be easily prepared on the freestanding polymeric film via a simple UV curing process. Due to unsaturated acrylate remained in the PUA mixture after UV curing, the freestanding PUA film provides adhesive properties, which enable mounting of the patchable organic lasing sheet onto non-flat surfaces with conformal contact. To achieve laser actions in the freestanding resonator structure, a composite material of liquid 9-(2-ethylhexyl)carbazole (EHCz) and organic laser dyes was used as the laser medium. Since the degraded active materials can be easily refreshed by a simple injection of the liquid composite, such a non-volatile liquid organic semiconducting medium has degradation-free and recyclable characteristics in addition to other strong advantages including tunable optoelectronic responses, solvent-free processing, and ultimate mechanical flexibility and uniformity. Lasing properties of the patchable organic lasing sheet were also investigated after mounting onto non-flat surfaces, showing a mechanical tunability of laser emission under variable surface curvature. It is anticipated that these results will be applied to the development of various patchable optoelectronic applications for light-emitting displays, sensors and data communications.

• 비파괴검사학회지
• /
• 제25권2호
• /
• pp.81-86
• /
• 2005

본 논문에서는 반도체 패키지 내부결함의 비파괴 정량평가를 위한 ESPI 기법을 이용한 시스템 및 검사기 법을 제안하고 있으며, 검사시스템은 ESPI 검사장치, 열변형유도장치, 단열챔버로 구성되어있다. 기존 초음파, X-ray 기반의 검사기법에 비하여 측정시간 및 검사방법이 용이하며, 결함의 정량검출이 가능하다는 장점이 있다. 검사결과에서 대부분의 결함이 열 방출이 많은 칩 주위에서 박리결함으로 나타났으며, 원인은 층간 접착강도의 약화와 열분배 설계에서 문제점인 것으로 사료된다.

• 콘크리트학회지
• /
• 제8권1호
• /
• pp.121-129
• /
• 1996

본 연구에서는 대기 습도변화에 의한 콘크리트 보수체(기층 콘크리트/보수 모르터)의 파괴현상을 조사하기 휘해서 보수체내의 비정상적인 습도분포를 계산하였다. 계산된 습도분포에 의해서 기층과 보수층 경계면 부위의 습도차이가 보수층 두께(0.5~2.5cm)와 보수작업전 기층 콘크리트 표면의 습윤처리시간(0~72hr)을 주요 변수로 하여 조사되었고, 이는 주로 시멘트 모르터로 보수된 접촉면이 없는 보수체에서 수행되었다. 계산 및 조사결과 보수층 두께가 감소하고 습윤 처리시간이 증가할수록 경계면 부위의 습도차이는 감소하는 경향을 보였고, 특히 보수후 습도차이가 음수값이 될 때의 시간을 하나의 수식으로 표시하였다.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1179-1186
• /
• 2006

This paper was designed to assess the adhesive properties of hard coatings on non-nitrided and nitrided various tool steels. Estimations of adhesion were done to scratch test which is mainly used in hard coating. The critical load$(L_c)$ between coating and substrate is defined through analysis of frictional load vs. normal load curve, signals of acoustic emission and optical observations. Coatings employed in this study are TiN, CrN and TiAlN, tools as substrates are STD11, STD61 and SKH51. It was classified to substrates with/without intermediate nitrided layer and hard coatings on substrate were deposited by arc PVD. Results showed that harder substrates and coatings give higher values of critical loads.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1085-1087
• /
• 2002

Deformation of soft tissue is known inhomogeneous and non-linear in general. In this study, we propose a measurement methodology of local/global strain during soft tissue elongation precisely using laser extensometer which has high accuracy, resolution and is possible to measure global/local strain. The mechanical tensile test are performed on tibialis cranialis, flexor hallucis longus, extensor digitorum longus of swine hindlimb. In order to measure target displacement, reflective marker is attached to detect elongation on specimen using surgical adhesive. The result of this study is to show that laser extensometer is valid to measure longitudinal elongation which is inhomogeneous and non-linear fur soft tissue.