• 한국방사선학회논문지
• /
• 제7권3호
• /
• pp.227-232
• /
• 2013

엑스선 디지털 검출기의 내부 픽셀들은 조금씩 다른 감도와 오프셋 변동을 가지게 되어 불균일한 영상이 얻어진다. 이러한 문제를 해결하기 위해서 flat-field 보정 방법이 개발되었고, 이는 디지털 의료 영상 시스템의 전처리 과정에서 필수적으로 수행된다. 그럼에도 불구하고 여러 가지 이유로 균일하지 않은 영상이 획득되는 경우가 종종 발생한다. 본 연구에서는 디지털 의료 영상 장비에서 획득된 불균일한 영상에 flat-field 보정을 다시 적용시켜 화질이 개선되는 것을 확인하였다. 그리고 객관적인 화질의 평가를 위해 보정 전후의 NPS를 각각 산출하여 비교하였다. 주파수 영역에서 잡음의 변화를 분석한 결과 저주파수 성분의 잡음이 flat-field 보정 후에 크게 제거된 것을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.213-229
• /
• 2013

Although performance based assessment procedures are mainly developed for reinforced concrete and steel buildings, URM (Unreinforced Masonry) buildings occupy significant portion of buildings in earthquake prone areas of the world as well as in IRAN. Variability of material properties, non-engineered nature of the construction and difficulties in structural analysis of masonry walls make analysis of URM buildings challenging. Despite sophisticated finite element models satisfy the modeling requirements, extensive experimental data for definition of material behavior and high computational resources are needed. Recently, nonlinear equivalent frame models which are developed assigning lumped plastic hinges to isotropic and homogenous equivalent frame elements are used for nonlinear modeling of URM buildings. The equivalent frame models are not novel for the analysis of masonry structures, but the actual potentialities have not yet been completely studied, particularly for non-linear applications. In the present paper an effective tool for the non-linear static analysis of 2D masonry walls is presented. The work presented in this study is about performance assessment of unreinforced brick masonry buildings through nonlinear equivalent frame modeling technique. Reliability of the proposed models is tested with a reversed cyclic experiment conducted on a full scale, two-story URM building at the University of Pavia. The pushover curves were found to provide good agreement with the experimental backbone curves. Furthermore, the results of analysis show that EFM (Equivalent Frame Model) with Dolce RO (rigid offset zone) and shell element have good agreement with finite element software and experimental results.

• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.403-423
• /
• 2016

The challenges involved with fatigue damage assessment of steel catenary riser (SCR) in the touchdown zone (TDZ) are primarily due to the non-linear behaviour of the SCR-seabed interaction, considerable uncertainty in SCR-seabed interaction modelling and geotechnical parameters. The issue of fatigue damage induced by the cyclic movements of the SCR with the seabed has acquired prominence with the touch down point (TDP) interaction in the TDZ. Therefore, the SCR-seabed response is critical for reliable estimation of fatigue life in the TDZ. Various design approaches pertaining to the lateral pipe-soil resistance model are discussed. These techniques have been applied in the finite element model that can be used to analyse the lateral SCR-seabed interaction under hydrodynamic loading. This study investigates the sensitivity of fatigue performance to geotechnical parameters through a parametric study. In this study, global analyses are performed to assess the influence of vertical linear seabed springs, the lateral seabed model and the non-linear seabed model, including trench evolution into seabed, seabed normalised stiffness, re-penetration offset parameter and soil suction resistance ratio, on the fatigue life of SCRs in the TDZ.

• 전자공학회논문지
• /
• 제53권10호
• /
• pp.77-83
• /
• 2016

본 논문에서는 칼라 영상의 대조비 개선을 위한 비대칭도 특성을 이용한 적응적인 대조비 개선 레티넥스 방식을 제안한다. 입력 영상 휘도 성분의 저조도 정도를 예측하기 위해 휘도 성분의 비대칭도 함수로 표현되는 매개변수를 정의하고, 정의된 매개 변수 및 예측 반사 성분을 이용하여 반사 성분을 보정하기 위한 비선형 함수를 제안한다. 더불어, 추정된 반사 성분의 통계 특성을 이용하여 비선형 함수의 이득 및 오프셋을 결정하는 방식에 대해 기술한다. 연산량 절감을 위해 색차 성분의 보정 과정을 위해 입력 영상의 휘도 성분과 보정된 휘도 성분을 이용한다. 실험을 통해 색신호 성분의 대조비 및 색신호 왜곡의 개선이 효과적으로 이루어짐을 확인할 수 있었다.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.9-15
• /
• 2011

In order to develop a practical postprocessor for 5-axis machining, the general equations of numerically controlled (NC) data for 5-axis configurations with not only non-orthogonal rotary axes but also orthogonal rotary axes were exactly expressed by the inverse kinematics, and a Windows-based postprocessor written in Visual Basic was developed according to the proposed algorithm. The developed postprocessor is a general system that suitable for all kinds of 5-axis machine tool with orthogonal and non-orthogonal rotary axes. Through implementation of the developed postprocessor and verification by a cutting simulation and machining experiment, the effectiveness of the proposed algorithm is confirmed. Compatibility is improved by allowing exchange of data formats such as rotational tool center position (RTCP) controlled NC data, vector post NC data, and program object file (POF) cutter location (CL)data, and convenience is increased by adding the function of work-piece origin offset. Consequently, the technology of practical post-processor for 5-axis machining is developed.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.162-169
• /
• 2019

This paper describes a thermal image processing algorithm for uncooled type TEC-less IR detector which is applicable to fire control system of small arms. We implemented a real-time gain and offset compensation algorithm based on polynomial approximation from the raw dataset which is acquired by two reference temperature of blackbody from various FPA(Focal Plane Array) temperature. Through the experiment, we analyzed the output characteristics of detector's raw-data and compared IR image quality to traditional non-uniformity correction method. It shows that the proposed method works well in all FPA temperature range with low residual non-uniformity.

• 디지털융복합연구
• /
• 제17권9호
• /
• pp.39-46
• /
• 2019

본 연구는 인천공항의 비항공수익 비중이 과연 지나치게 높은 것인가라는 연구 질문에서 출발하게 되었다. 공항의 전통적 비즈니스 모델에 기반 한 항공수익은 여러 규제로 인해 성장의 한계를 가지고 있지만, 경쟁력 향상을 고민하는 공항운영주체들에 의해 비항공수익 증대에 대한 관심이 커지고 있다. 본 연구에서는 공항의 비항공수익이 공항사용료에 미치는 영향을 다루고 있으며, 공항산업의 핵심이슈 중 하나인 민영화 요인을 연구에 반영하였다. 또한, 인천공항 단일 사례가 아닌 전 세계 178개 공항을 대상으로 실증 분석하였다. 연구결과 국제공항의 비항공수익 비중이 높을수록 공항사용료는 낮아지는 것으로 나타났으며, 민간지분율은 비항공수익 비중과 공항사용료 간의 인과관계를 양(+)의 방향으로 조절하였다. 이는 공항의 민영화 추진이 상업 활동 증대를 통한 공항사용료 감소효과를 상쇄하는 결과를 초래할 수 있는 것으로 해석할 수 있다. 조절효과에 대한 가설검증은 그림으로 이해하기 쉽도록 도표로 제시하였다.

• Structural Engineering and Mechanics
• /
• 제57권6호
• /
• pp.989-1014
• /
• 2016

This paper deals with the analysis of the natural frequencies, mode shapes of an axially loaded beam system carrying ends consisting of non-concentrated tip masses and three spring-two mass sub-systems. The influence of system design and sub-system parameters on the combined system characteristics is the major part of this investigation. The effect of material properties, rotary inertia and shear deformation of the beam system is included. The end masses are elastically supported against rotation and translation at an offset point from the point of attachment. Sub-systems are attached to center of gravity eccentric points out of the beam span. The boundary conditions of the ordinary differential equation governing the lateral deflections and slope due to bending of the beam system including developed shear force frequency dependent terms, due to the sub.system suspension, have been formulated. Exact formulae for the modal frequencies and the modal shapes have been derived. Based on these formulae, detailed parametric studies are carried out. The geometrical and mechanical parameters of the system under study have been presented in non-dimensional analysis. The applied mathematical model is presented to cover wide range of mechanical, naval and structural engineering applications.

• 조명전기설비학회논문지
• /
• 제20권10호
• /
• pp.74-81
• /
• 2006

본 논문은 회전자 위치와 속도 정보를 가진 고정자 자속을 추정할 수 있는 프로그래머블 저역통과 필터를 이용한 비돌극 영구자석형 동기전동기의 센서리스 벡터제어를 제안한다. PLPF를 사용한 PMSM의 센서리스 벡터제어는 LPF와 순수적분기가 갖는 DC 드리프트 문제를 해결할 수 있다. 또한 PLPF는 정확한 회전자 위치와 속도 추정을 위해 위상과 이득 보상기를 갖는다. 그러므로, 드리프트와 옵셋 문제는 PLPF로써 해결되기 때문에 위치 및 속도의 정보는 정확히 추정된다. 실험결과는 정격속도의 10[%]이상과 부하상태에서 좋은 성능을 보여준다.

• Journal of Electrical Engineering and information Science
• /
• 제2권6호
• /
• pp.202-207
• /
• 1997

Design and fabrication issues for an L-band GaAs Monolithic Microwave Integrated Circuit(MMIC) Voltage Controlled Oscillator(VCO) as a component of Personal Communications Systems(PCS) Radio Frequency(RF) transceiver are discussed. An ion-implanted GaAs MESFET tailored toward low current and low noise with 0.5mm gate length and 300mm gate width has been used as an active device, while an FET with the drain shorted to the source has been used as the voltage variable capacitor. The principal design was based on a self-biased FET with capacitive feedback. A tuning range of 140MHz and 58MHz has been obtained by 3V change for a 600mm and a 300mm devices, respectively. The oscillator output power was 6.5dBm wth 14mA DC current supply at 3.6V. The phase noise without any buffer or PLL was 93dB/1Hz at 100KHz offset. Harmonic balance analysis was used for the non-linear simulation after a linear simulation. All layout induced parasitics were incorporated into the simulation with EEFET2 non-linear FET model. The fabricated circuits were measured using a coplanar-type probe for bare chips and test jigs with ceramic packages.