• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.119-120
• /
• 2015

We report results of the measurement of the trigonometric parallax of an $H_2O$ maser source in IRAS 22555+6213 with the VLBI Exploration of Radio Astrometry (VERA). The annual parallax was determined to be $0.278{\pm}0.019$ mas, corresponding to a distance of $3.66^{+0.30}_{-0.26}kpc$. Our results confirm that IRAS 22555+6213 is located in the Perseus arm. We computed the peculiar motion of IRAS 22555+6213 to be ($U_{src}$, $V_{src}$, $W_{src}$) = ($0{\pm}1$, $-32{\pm}1$, $9{\pm}1$) $km\;s^{-1}$, where $U_{src}$, $V_{src}$, and $W_{src}$ are directed toward the Galactic center, in the direction of Galactic rotation and toward the Galactic north pole, respectively. IRAS 22555+6213, NGC7538 and Cepheus A lie along the same line of sight, and are within $2^{\circ}$ on the sky. Their parallax distances, with which we derived their absolute position in the Milky Way, show that IRAS 22555+6213 and NGC7538 are associated with the Perseus arm, while Cepheus A is located in the Local arm. We compared the kinematic distances of IRAS 22555+6213 derived with flat and non-flat rotation curve with its parallax distance and found the kinematic distance derived from the non-flat rotation assumption ($-32km\;s^{-1}$ lag) to be consistent with the parallax distance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.140-146
• /
• 2018

Recently, VLC(Visible Light Communication) fusing with LED(Light Emitting Diode) used in indoor lighting and wireless communication technology has attracted attention. However, the VLC can communicate only within the coverage to measure the optical signal and the communication disconnection phenomenon is occur in the NLoS(Non-Line-of-Sight) area. In this paper, we propose VLC relay module to extend the coverage of VLC and improve the communication disconnection phenomenon in NLoS area. The proposed VLC relay module transmits the packet received from the transmitter to the VLC relay module and receiver. The experiment was carried out by installing one VLC transmitter and three VLC relay modules, communication coverage expansion and the improvement of communication disconnection phenomenon in the NLoS were confirmed by the increase of the VLC relay module. Also, we confirmed that the optical signal measurement performance is improved 2.4 times by using the dual sampling method.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.357-362
• /
• 2021

UWB(ultra wide band) communication systems employ short pulses to transmit information which spreads the signal energy over a very wide frequency spectrum. Received signal-to-noise power ratio of UWB signals is an important factor in determining the accuracy of a positioning system. As the signal to noise power ratio gets higher, positioning errors decrease since noise becomes less effective. Calculation of signal to noise power ratio as a function of communication distance provides important guidelines for the system design. And the performance of a positioning system also depends heavily on the channel model. As a result of the analysis, it was found that the performance of the received signal to noise power ratio according to the communication distance was better in the LOS channel environment than in the Non LOS(line of sight) channel environment. And as the symbol interval of the preamble signal increases at a specific communication distance, the channel capacity of the UWB system increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.725-730
• /
• 2010

Preparing the conversion to the digital broadcasting system, we are deciding broadcasting network plan and interference protection area, using the measured receiving electric field level from the digital broadcasting station. However, the essential researches are needed about a receiving electric field level, because a digital TV (DTV) broadcasting receiver has been improved and an actual receiving environment should be considered. In this paper, the measured data were classified with domestic terrain of line of sight (LOS) and those of non-LOS, and effective receiving electric field level was proposed based on the LOS data. It is known that receiving electric field-level of 48 ㏈uV/m or more should be required for receiving rate of 90% and 50 ㏈uV/m for that of 95%, on the basis of the information of domestic terrain LOS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.309-316
• /
• 2012

The compensation algorithm for localization using the least-squires method in NLOS(Non Line of Sight) environment is suggested and the performance of the algorithm is analyzed in this paper. In order to improve the localization correction rate of the moving node, 1) the distance value of the moving node that is moving as an constant speed is measured by SDS-TWR(Symmetric Double-Sided Two-Way Ranging); 2) the location of the moving node is measured using the triangulation scheme; 3) the location of the moving node measured in 2) is compensated using the least-squares method. By the experiments in NLOS environment, it is confirmed that the average localization error rates are measured to ${\pm}1m$, ${\pm}0.2m$ and ${\pm}0.1m$ by the triangulation scheme, the Kalman filter and the least-squires method respectively. As a result, we can see that the localization error rate of the suggested algorithm is higher than that of the triangulation as average 86.0% and the Kalman filter as average 16.0% respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1789-1798
• /
• 2012

IEEE 802.15.4a standard can provide a variety of location-based services for ZigBee or wireless network applications by adapting the time-of-arrival (TOA) ranging technique. The non-line-of-sight (NLOS) condition is the critical problem in the IEEE 802.15.4a networks, and it can significantly degrade the performance of the TOA-based localization. To enhance the location accuracy due to the NLOS problem, this paper proposes an energy-efficient low complexity localization algorithm. The proposed approach performs the ranging with the multicast method, which can reduce the message overhead due to packet exchanges. By limiting the search region for the location of the node, the proposed approach can enhance the location accuracy. Experimental results show that the proposed algorithm outperforms previous algorithms in terms of the energy consumption and the localization accuracy.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.5
• /
• pp.1317-1340
• /
• 2024

With the rapid development of information technology, people's demands on precise indoor positioning are increasing. Wireless sensor network, as the most commonly used indoor positioning sensor, performs a vital part for precise indoor positioning. However, in indoor positioning, obstacles and other uncontrollable factors make the localization precision not very accurate. Ultra-wide band (UWB) can achieve high precision centimeter-level positioning capability. Inertial navigation system (INS), which is a totally independent system of guidance, has high positioning accuracy. The combination of UWB and INS can not only decrease the impact of non-line-of-sight (NLOS) on localization, but also solve the accumulated error problem of inertial navigation system. In the paper, a fused UWB and INS positioning method is presented. The UWB data is firstly clustered using the Fuzzy C-means (FCM). And the Z hypothesis testing is proposed to determine whether there is a NLOS distance on a link where a beacon node is located. If there is, then the beacon node is removed, and conversely used to localize the mobile node using Least Squares localization. When the number of remaining beacon nodes is less than three, a robust extended Kalman filter with M-estimation would be utilized for localizing mobile nodes. The UWB is merged with the INS data by using the extended Kalman filter to acquire the final location estimate. Simulation and experimental results indicate that the proposed method has superior localization precision in comparison with the current algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1926-1933
• /
• 2013

Many localization algorithms have been proposed for Wireless Sensor Networks (WSNs). The IEEE 802.15.4a-based location-aware-system can provide precise ranging distance between two mobile nodes. The mobile nodes can obtain their exact locations by using accurate ranging distances. However, the indoor environments contain various obstacles which cause non-line-of-sight (NLOS) conditions. In NLOS condition, the IEEE 802.15.4a-based location-aware system has a large scale location error. To solve the problem, we propose location error compensation in indoor environment by using MST-based topology control. Experimental and simulation results show that the proposed algorithm improves location accuracy in NLOS conditions.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.35.1-35.1
• /
• 2012

Determining the virial factor of the broad-line region (BLR) gas is crucial in calibrating AGN black hole mass estimators, since the measured line-of-sight velocity needs to be converted into the representative velocity of the BLR gas. The unknown virial factor has been empirically calibrated based on the $M_{BH}-{\sigma}_*$ relation of non-AGN galaxies, but the claimed values are different by a factor of 2 in recent studies. We investigate the origin of the difference by measuring the $M_{BH}-{\sigma}_*$ relation using the most updated nearby galaxy sample, and explore the dependence of the virial factor on the various fitting methods. We find that the discrepancy is mostly caused by the sample bias while the difference stemming from various regression methods is marginal. Based on the best-determined virial factor, we present the updated $M_{BH}-{\sigma}_*$ relation of local active galaxies.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1797-1799
• /
• 1998

Plasma source ion implantation(PSII) is a non-line-of-sight technique for surface modification of materials which is effective for non-planar targets. A apparatus of 30kV PSII is established and plasma characteristics are diagnosed by using a Langmuir probe. A spherical target is immersed in argon plasma and biased negatively by a series of high voltage pulses. Sheath evolution is measured by using a Langmuir probe and compared with the result of computer simulations.