• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.122.1-122.1
• /
• 2011

The motivation for this work was the potential of hydrophobic amino acids such as glycine, L-alanine, and L-valine to be applied as thermodynamic hydrate inhibitors (THIs). To confirm their capabilities in inhibiting the formation of gas hydrates, three-phase (liquid-hydrate-vapor) equilibrium conditions for carbon dioxide hydrate formation in the presence of 0.1 to 3.0 mol% amino acid solutions were determined in the range of 273.05 to 281.45 K and 14.1 to 35.2 bar. From quantitative analyses, the inhibiting effects of the amino acids (on a mole concentration basis) decreased in the following order: L-valine > L-alanine > glycine. The application of amino acids as THIs has several potential advantages over conventional methods. First, the environmentally friendly nature of amino acids as compared to conventional inhibitors means that damage to ecological systems and the environment could be minimized. Second, the loss of amino acids in recovery process would be considerably reduced because amino acids are non-volatile. Third, amino acids have great potential as a model system in which to investigate the inhibition mechanism on the molecular level, since the structure and chemical properties of amino acids are well understood.

• 지질공학
• /
• 제9권3호
• /
• pp.253-265
• /
• 1999

충청북도 제천 지역에 있는 갑산층 퇴적암을 대상으로 지구물리검층과 실내 코어물성 측정에 의한 물성 반응 특성을 연구하였다. 자연감마와 전기비저항 및 밀도를 대상으로 하여 지구물리검층과 실내 코어물성 사이에 나타나는 유사성과 차이점을 비교하는데 초점이 모아졌으며 특히 물리검층과 실내 코어물성 사이에 나타나는 차이점 분석 과정을 통하여 검층밀도 결정에 있어서 자연감마의 영향을 분석하였다. 자연감마의 영향 보정에 의하여 두 물성간의 상관성이 개선되고 검층해석 결과에서 신뢰도가 크게 향상되었다. 물성 값중에서는 갑산층 셰일의 밀도가 주변의 치밀질 석회암보다도 높게 나타나고 있음이 주목되었다.

• 설비공학논문집
• /
• 제14권10호
• /
• pp.863-870
• /
• 2002

Fossil fuels have been depleted gradually and new energy resource which can solve this shortage is needed now. Methane hydrate, non-polluting new energy resource, satisfies this requirement and considered the precious resource prevent the global warming. Fortunately, there are abundant resources of methane hydrate distribute in the earth widely, so developing the techniques that can use these gases effectively is fully valuable. the work presented here is to develop the skill which can transport and store methane hydrate. As a first step, the equilibrium point experiment has been carried out by increasing temperatures in the cell at fixed pressures. The influence of gas consumption rates under variable degree of subcooling, stirring and water injection has been investigated formation to find out kinetic characteristics of the hydrate. The results of present investigation show that the enhancements of the hydrate formation in terms of the gas/water ratio are closely related to operational pressure, temperature, degrees of subcooling, stirring rate, and water injection.

• Journal of Plant Biology
• /
• 제2권1호
• /
• pp.35-42
• /
• 1959

1. 발아시부터 단일, 암기저온 조건하에서는 괴근은 전연 형성되지 않고, 장일조건에서만 괴근이 형성됨. 따라서 장일조건이 고구마괴근 형성에 대한 유도조건 내지 촉진조건임을 알 수 있다. 2. 본실험은 시종 약전광(300W 전구 사용)으로 재배하였기 때문에 동화작용이나 생장이 특히 미약한 상태에서도 괴근이 유도되었다. 따라서 괴근형성에는 동화물질이나 생장보다도 장일조건이 직접적결요인을 이루는 1종자극을 성립하는 것으로 보인다. 3. 장기조건과 단일조건하의 근계가 서로 특이한 상태를 나타냈고 그것은 단일과 장일조건이 이룬 자극과 관계하는 것으로 보인다. 4. 고구마괴근이 장일조건에 유되되는 사실의 생태학적 의의를 고찰함.

• 안보군사학연구
• /
• 통권5호
• /
• pp.393-599
• /
• 2007

In order to restore the Hwangsanbeol Combat at present, it is necessary to make a close examination on the name of the military cops, the number of units, and the numerical strength, an unit organization, and a combat formation. Based on Samguksagi, Samgukyusa, other historical documents and military history information, I tried to restore the Hwansanbeol Combat as follow. The Shilla, at the 7 year of Mooyeol Dynasty, AD. 660, maintained 35 military units. The Shilla committed18 military units from among 35 units to battle against Baekje at the 7 Year of Mooyeol Danasty. The names ofmilitary units are as follow: 1) Daedang, 2) Sangjoojeong, 3) Hajoojeong, 4) Seodang, 5) Nangdang, 6) Eumlihwajeong, 7) Samryanghwajeong, 8) Sosarnjeong, 9) Namcheonjeong, 10) Leehwahaejeong, 11) Kaegeumdang, 12) Geupdang, 13) Nodang, 14) Woonjaednag, 15) Chungdang, 16) Suktoodang, 17) Gwidang, and 18) Soogun. The numerical strength, which the Shilla maintained at the year of A.D. 660, was total 106,353 persons from 35 military units. Shilla committed 57,433 military personnel to combats against the Great Baekche. Ground Forces from the 57,433 personnel were 58,343 persons, and the naval forces were 9,100 persons. Finally, 2,602 persons from among the 9,100 naval forces were only combating forces, and non-combat forces were 6498 persons.

• Structural Engineering and Mechanics
• /
• 제63권5호
• /
• pp.669-681
• /
• 2017

The design of reinforced concrete buildings must satisfy the serviceability stiffness criteria in terms of maximum lateral deflections and inter story drift in order to prevent both structural and non-structural damages. Consideration of plastic hinge formation is also important to obtain accurate failure mechanism and ultimate strength of reinforced concrete frames. In the present study, an iterative procedure has been developed for the analysis of reinforced concrete frames with cracked elements and consideration of plastic hinge formation. The ACI and probability-based effective stiffness models are used for the effective moment of inertia of cracked members. Shear deformation effect is also considered, and the variation of shear stiffness due to cracking is evaluated by reduced shear stiffness models available in the literature. The analytical procedure has been demonstrated through the application to three reinforced concrete frame examples available in the literature. It has been shown that the iterative analytical procedure can provide accurate and efficient predictions of deflections and ultimate strength of the frames studied under lateral and vertical loads. The proposed procedure is also efficient from the viewpoint of computational time and convergence rate. The developed technique was able to accurately predict the locations and sequential development of plastic hinges in frames. The results also show that shear deformation can contribute significantly to frame deflections.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.22-28
• /
• 2008

Friction stir welding(FSW) is an relatively new solid state joining process. A1606l-T6 aluminium alloy has gathered wide acceptance in the fabrication of light weight structures requiring a high strength to weight ratio and good corrosion resistance. This friction stir process(FSP) uses a non-consumable tool to generate frictional heat in the abutting surfaces. The welding parameters such as tool rotational speed, welding speed, etc., and tool pin profile playa major role in deciding FSP zone formation in A16061-T6 aluminium alloy. Tow different tool pin profiles have been used to fabricate the joints. The formation of friction stir processed zone has been analysed macroscopically. Tensile properties of the joints have been evaluated and correlated with the friction stir processed zone formation.

• 천문학회보
• /
• 제37권2호
• /
• pp.90.2-90.2
• /
• 2012

Galaxy merging plays a important role to the formation and evolution of galaxy. Early-type galaxies are believed to be formed by galaxy merging. We combined 3 color images in g,r,i band using Stripe82 image of which the surface brightness is 2 mag deeper than that of SDSS image. We classified early-type galaxies which have the merging features, the evidence of galaxy mergers through careful visual inspection. We investigated the IR properties of early-type galaxies with the merging feature using WISE data. We analyzed the star formation according to the type of galaxy. Early-type galaxies with the merging feature show the higher star formation than non-merging galaxies, but the difference is not significant. This results implies that quite a few early-type galaxies might be formed by dry merger, not wet merger. Meanwhile, the most of ULIRGs show tidal tail, on the other hand, early-type galaxies show tidal tail including shell structure. It suggests that ULIRGs have more gas and it might be in early stage of galaxy merging, early-type galaxies might be in the late stage of galaxy merging.

• Journal of Microbiology and Biotechnology
• /
• 제5권4호
• /
• pp.213-217
• /
• 1995

The effect of inorganic phosphate on the fermentative production of aminopeptidase M inhibitors MR-387A and B by Streptomyces sp. SL-387 has been studied. With inorganic phosphate concentrations higher than 0.78 mM, an inverse correlation was found between the maximum inhibitor production and the initial phosphate concentration added. Growth sensitivity of this actinomycete to arsenate, a phosphate analogue, and the use of magnesium carbonate, a phosphate-trapping agent, suggested that the inhibitor formation was under phosphate repression. Exogenous ATP further increased the degree of phosphate interference in both phosphate-repressed and non repressed culture conditions. The use of a phosphate analogue and a protein synthesis inhibitor also suggested that the phosphate itself repressed inhibitor formation.

• Journal of Mechanical Science and Technology
• /
• 제19권12호
• /
• pp.2253-2262
• /
• 2005

The focus of this work is placed on the analysis of the mixture formation mechanism under the evaporative diesel spray of impinging and free conditions. As an experimental parameter, ambient gas density was selected. Effects of density variation of ambient gas on liquid and vapor-phase inside structure of evaporation diesel spray were investigated. Ambient gas density was changed between ${\rho}a=5.0\;kg/m^3$ and $12.3\;kg/m^3$. In the case of impinging spray, the spray spreading to the radial direction is larger due to the decrease of drag force of ambient gas in the case of the low density than that of the high density. On the other hand, in the case of free spray, in accordance with the increase in the ambient gas density, the liquid-phase length is getting short due to the increase in drag force of ambient gas. In order to examine the homogeneity of mixture consisted of vapor-phase fuel and ambient gas in the spray, image analysis was conducted with statistical thermodynamics based on the non-dimensional entropy (S) method. In the case of application of entropy analysis to diesel spray, the entropy value always increases. The entropy of higher ambient density is higher than that of lower ambient gas density during initial injection period.