• 한국생산제조학회지
• /
• 제18권3호
• /
• pp.270-278
• /
• 2009

Friction stir welding is a relatively new solid state joining process. A6061-T6 and A5052-H32 aluminium alloy has gathered wide acceptance in the fabrication of light weight structures requiring a high strength to weight ratio and good corrosion resistance. This friction stir process uses a non-consumable tool to generate frictional heat in the abutting surfaces. The welding parameters such as tool rotational speed, welding speed, etc., and tool pin profile play a major role in deciding FSP zone formation in A6061-T6 and A5052-H32 aluminium alloy. Three different tool pin profiles have been used to fabricate the dissimilar butt joints. The formation of friction stir processed zone has been analysed macroscopically. Tensile properties of the joints have been evaluated and correlated with the friction stir processed zone formation.

• 대한기계학회논문집B
• /
• 제24권11호
• /
• pp.1464-1469
• /
• 2000

The effects of SiCl$_4$addition on flame structures have been studied in flame hydrolysis deposition (FHD) processes using Coherent anti-Stokes Raman spectroscopy (CARS) and planar laser induced fluorescence (PLIF) to measure temperatures and OH concentrations, respectively. The results demonstrate that even a small amount of SiCl$_4$ addition can change thermal and chemical structures of H$_2$/O$_2$ diffusion flames. When SiCl$_4$ is added to a flame temperature decreases in non-reacting zone due to the increases in both specific heat and density of the gas mixture, while flame temperature increase in particle formation zone due to the heat release through hydrolysis and oxidation reactions of SiCl$_4$. It is also found that OH concentration decreases dramatically in particle formation zone where temperatures increase. This can be attributed to consumption of oxidative species and generation of HCl during silica formation.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.11-22
• /
• 1996

It has been generally accepted that NOx formation increases as the maximum temperature or correspondingly the maximum pressure of a combustion system increases. Recently some exceptional experimental results have been reportes that under certain circumstance NOx formation could be reduced while the maximum pressure was increasing by varying the methods of combustion for the same kind of premixed gases. Until now that kind of results have been acquired only for the case of a dual opposed prechamber. But the mechanism has not been clearly understood yet. 3D computer simulation has been tried to clarify the mechanism. Flor this purpose KIVA-Ⅱ has been modified and applied to the model combustion chamber with which the same kind of experimental works have been done by the authors. A good agreement with the experimental results was achieved with the spatial and temporal resolution which is hard th be obtained by the experimental methods. And it was observed that for the dual opposed prechamber case the time for the NOx formation, which is non-equilibrium reaction, is shorter than any other case by an appropriate mixing process in the main combustion chamber. The shorter time reduceed heat loss through the combustion chamber walls and thereby obtaines the higher maximum pressure.

• Journal of Microbiology and Biotechnology
• /
• 제7권3호
• /
• pp.204-208
• /
• 1997

Aureobasidium puliulans possesses the capacity for simultaneous formation of fructosyltransferase and glucosyltransferase in various sugar media including sucrose, maltose, glucose and fructose. Among them, sucrose (300 g/1) was the most suitable carbon source for fructosyltransferase production, while fructose (100 g/1) gave the maximal production of glucosyltransferase. There existed a critical concentration for the optimal formation of enzymes in sucrose, glucose and fructose media. By contrast, no effect of maltose concentrations up to 300 g/1 was observed. The specific activity of the glucosyltransferase on maltose medium was highest during the early period of fetmentation, after which a sharp decrease occurred, whereas fructosyltransferase activity on sucrose medium maintained a nearly constant rate for a given culture period. Concomitant production of fructosyltransferase and glucosyltransferase was investigated with different combinations of lower concentrations of sucrose and maltose. Maltose supplementation in sucrose media and sucrose addition to maltose media enhanced the activity ratios of fructosyltransferase to glucosyltransferase as compared to that of non-supplemented media. Several polymers and surfactants were added in an attempt to enhance enzyme production, and supplementation of polyoxyethylene-sorbitan monolaurate (Tween 20) promoted fructosyltransferase production by 20%.

• 천문학회보
• /
• 제41권2호
• /
• pp.43.1-43.1
• /
• 2016

The duration of star formation activity is a key to understanding the formation process of star clusters. Although a number of astronomers have attempted to derive the underlying age spread in photometric diagrams with a variety of stellar evolutionary models, the resultant findings are subject to uncertainties due to intrinsic variability of pre-main sequence (PMS) stars, observational errors, difficulties in reddening correction, and systematic differences in adopted stellar evolutionary models. The distribution of Li abundance for PMS stars in a cluster could, on the other hand, provide an alternative way to estimate the age spread. In this study, a total of 134 PMS stars in NGC 2264 are observed with the high resolution multi-object spectrogragh Hectochelle attached to the 6.5m Multi Mirror Telescope. We have successfully detected Li ${\lambda}6708$ resonance doublet for 86 low-mass PMS stars. The Li abundance of the stars is derived from their equivalent width using a curves of growth method. After correction for non-LTE effects, the underlying age spread of 3 - 4 Myr is inferred from the Li abundance distribution of low-mass PMS stars. We suggest that NGC 2264 formed on a timescale shorter than 5 Myr given the presence of embedded populations.

• Journal of Periodontal and Implant Science
• /
• 제34권1호
• /
• pp.149-162
• /
• 2004

This study was performed to evaluate the effect of freeze-dried bone graft on space-making capacity and bone formation in the procedure of guided bone regeneration with titanium reinforced ePTFE membrane. After decortication in the calvaria, GBR procedure was performed on 8 rabbits with titanium reinforced ePTFE membrane filled with human FDBA(Rocky Mountain Tissue Bank,Aurora Co., USA). Decortication was performed to induce the effect of bone forming factor from bone marrow. The animals were sacrificed at 2 weeks, 4 weeks, 8 weeks and 12 weeks after the surgery. Non-decalcified specimens were processed for histologic analysis. πle results of this study were as follows: 1. Titanium reinforced-ePTFE membrane was biocompatable and capable of maintaining the space-making. 2. FDBA particle was surrounded with connective tissues but there was no evidence on new bone formation. 3. FDBA particle resorbed continuously but it remained until 12weeks after the surgery. Within the above results, TR-ePTFE membrane could be used effectively for Guided bone regeneration but It was assumed that FDBA does not appear to contribute to bone formation.

• Journal of Periodontal and Implant Science
• /
• 제34권1호
• /
• pp.163-175
• /
• 2004

This study was performed to evaluate bone formation in the calvaria of rabbit by the concept of guided bone regeneration with titanium mesh membrane and demineralized freeze-dried bone. The animal was sacrificed at 2 weeks, 4 weeks, 8 weeks, and 12 weeks after the surgery. Non-decalcified specimens were processed for histologic analysis. 1. The titanium mesh but the biocompatibility was excellent the cell-occlusiveness was feeble. 2. The cell-occlusiveness was feeble and also the soft tissue growth of the upper part of the newly-formed bone after operating was excellent in early stage. 3. The maintenance ability of the space for the GBR very was excellent. 4. The titanium mesh the tissue-integration was superior the wound fixation ability excellent. 5. The demineralized freeze-dried bone did not promote the bone regeneration. 6. With the lapse of time, formation quantity of the bone some it increased, it increased quantity very it was feeble. Within the above results, the titanium mesh for the guided bone regeneration was excellent, the dεmineralized freeze-dried bone confirmed does not promote bone regeneration.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권7호
• /
• pp.894-896
• /
• 2000

In vitro fertilization can be used for salvaging superior buffalo germplasm which otherwise goes waste after the slaughter of animals. This technology has also increased our basic understanding of growth of germ cells and embryos. The requirement of growing embryos is peculiar and stage specific. In the present study the cleavage and development of buffalo embryos were studied with homologous (buffalo) and heterologous (goat) oviductal cell co-culture systems. The cleavage rate improved significantly (p<0.01) in both homologous and heterologous co-culture as compared to control (55.3, 46.8 and 11.4%). The morula formation using homologous and heterologous oviductal cells also increased significantly as compared to control group (43.6, 21.9 & 1.9%). There was no blastula formation in control group, but addition of oviductal cells either from homologous or heterologous species significantly increased the blastula formation (9.5, 12.5%). The cleavage rate and embryo development was slightly better (non significant) in homologous as compared to heterologous oviductal cell culture. It was concluded that the use of oviductal cell co-culture (homologous and heterologous species) have significantly improved cleavage and development of buffalo embryos in vitro.

• Journal of Chest Surgery
• /
• 제50권1호
• /
• pp.30-35
• /
• 2017

Background: Tapered grafts, which have a smaller diameter on the arterial side, have been increasingly used for arteriovenous fistula (AVF) formation. We compared the outcomes of 4-6-mm tapered and 6-mm straight forearm loop arteriovenous grafts. Methods: A total of 103 patients receiving forearm loop arteriovenous grafts between March 2005 and March 2015 were retrospectively analyzed and separated into 2 groups (group A, 4- to 6-mm tapered grafts, n=78; group B, 6-mm straight grafts, n=25). In each group, complications and patency rates after surgery were assessed. Results: Clinical characteristics and laboratory results, except for cerebrovascular disease history (group A, 7.7%; group B, 28.0%; p=0.014), were similar between the groups. No significant differences were found for individual complications. Kaplan-Meier survival analysis revealed no significant differences in 1-year, 3-year, and 5-year patency rates between groups (61.8%, 44.9%, and 38.5% vs. 62.7%, 41.1%, and 35.3%, respectively). Conclusion: We found no significant differences in complication and patency rates between the tapered and straight graft groups. If there are no differences in complication and patency between the two graft types, tapered grafts may be a valuable option for AVF formation in light of their other advantages.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2009년도 추계학술발표회 논문집
• /
• pp.79-84
• /
• 2009

Understanding the polymer adsorption in particle/binder/solvent system is important to achieve successful film products. While most of the reported work has dealt with the suspension microstructure, a few studies have focused on film formation. We investigated the effect of adsorption on film formation through measurement of adsorption amount in suspension and stress development in drying film with respect to mixing time ($t_m$). All of the adsorption amount (PVA), characteristic stress ($\sigma_{ch}$) exhibited similarities expressed by the form of $1-e^{t_m/{\tau}}$. The porous and non-unifonn dried film at short tm became close-packed and uniform with longer $t_m$. We found that polymer adsorption plays the key role in film fonnation as it introduces steric repulsion in suspension and suppresses the flocculation during solvent evaporation. We also found that the mixing time for the saturated polymer adsorption is the important variable to acquire the consolidated and uniform film microstructure.