• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.319-325
• /
• 2014

This article describes a method for producing chitosan non-woven fabrics by just hot pressing without the use of a binder. A study has been made of the wet spinning of chitosan fiber. The fibers were rinsed thoroughly in running water and chopped wet into staples of with a length of approximately 5-10 mm. The chopped chitosan staples were dispersed uniformly in water and fabricated using a non-woven making machine. This study examined the formation and the characteristics of chitosan non-woven fabrics manufactured by hot pressing without the use of a binder. The effects of the non-woven fabrication conditions on the thermal, morphological, structural, and physical properties of chitosan non-woven fabric with and without water as a plasticizer were studied. The temperature of the exothermic peak, decomposition of chitosan fibers increased with increasing heating rate. Water in the chitosan fiber effectively plasticized the chitosan fiber. The thermal bonded structure of the wet chitosan fiber with water as a plasticizer was clearly found in many parts of the non-woven fabric at a fabrication temperature of $200^{\circ}C$. The intensity and profile of the (100) plane($2{\theta}=10.2^{\circ}$) and (040) plane($2{\theta}=20.9^{\circ}$) in the chitosan non-woven fabric decreases and became smooth in the non-woven fabric formation by melting.

• BMB Reports
• /
• v.52 no.10
• /
• pp.607-612
• /
• 2019

During meiosis, programmed double-strand breaks (DSBs) are repaired via recombination pathways that are required for faithful chromosomal segregation and genetic diversity. In meiotic progression, the non-homologous end joining (NHEJ) pathway is suppressed and instead meiotic recombination initiated by nucleolytic resection of DSB ends is the major pathway employed. This requires diverse recombinase proteins and regulatory factors involved in the formation of crossovers (COs) and non-crossovers (NCOs). In mitosis, spontaneous DSBs occurring at the G1 phase are predominantly repaired via NHEJ, mediating the joining of DNA ends. The Ku complex binds to these DSB ends, inhibiting additional DSB resection and mediating end joining with Dnl4, Lif1, and Nej1, which join the Ku complex and DSB ends. Here, we report the role of the Ku complex in DSB repair using a physical analysis of recombination in Saccharomyces cerevisiae during meiosis. We found that the Ku complex is not essential for meiotic progression, DSB formation, joint molecule formation, or CO/NCO formation during normal meiosis. Surprisingly, in the absence of the Ku complex and functional Mre11-Rad50-Xrs2 (MRX) complex, a large portion of meiotic DSBs was repaired via the recombination pathway to form COs and NCOs. Our data suggested that Ku complex prevents meiotic recombination in the elimination of MRX activity.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.112-117
• /
• 2004

The effects of laser heating on soot formation and oxidation of propylene diffusion flames have been studied experimentally under nearly sooting conditions. The non-sooting flame can be converted to a sooting flame when the laser light heats up a flame at 7 mm height, while a sooting flame can be changed to a non-sooting flame when a flame is heated with laser light at flame height of 13 mm. The selective heating at the soot formation and/or oxidation region determines the sooting behavior of a diffusion flame. The increased soot/flame temperatures are most likely to be responsible for both the decreased and increased soot formation/oxidation.

• 한국연소학회:학술대회논문집
• /
• 2002.11a
• /
• pp.49-56
• /
• 2002

A two-dimensional direct numerical simulation is performed to investigate the formation characteristics of a single vortex interacting with $CH_4/N_2$-Air counterflow nonpremixed flame. The numerical method was based on a predictor-corrector scheme for a low Mach number flow. The detailed transport properties and a 16-step augmented reduced mechanism are adopted in this calculation. The budgets of the vorticity transport equation arc examined to reveal the mechanisms leading to the formation, evolution and dissipation of a single vortex interacting with counterflow nonpremixed flame. It is found that the stretching term, which depends on the azimuthal component of vorticity, and radial velocity, mainly generates vortieitv in non-reacting and reacting flows. The viscous and baroclinic torque term destroy the vorticity in non-reacting flow. In addition, the baroclinic torque term due to density and pressure gradient generates vorticity, while viscous and the volumetric expansion terms due to density gradient destroy vorticity in reacting flow.

• Journal of the Korean Home Economics Association
• /
• v.24 no.1
• /
• pp.43-51
• /
• 1986

In order to study antioxidative acton of garlic, alliin, scordinin, garlic oil, ethanol fraction and non-kaolin fraction which have been discovered from garlic until now were extracted and isolated, and each fraction was utilized as the experimental materials. Antioxidative action of each fraction was compared through the in vitro and in vivo experiments. Electron donatingability on $\alpha$, $\alpha$-diphenyl-$\beta$picrylhydra-$\chi$yl, the inhibitory effect of lipoperoxide formation by TBA and peroxide value were measured and analyzed. RESULTS : 1. When observed antioxidative ability by EDA value, ethanol fraction of garlic components showed the strongest reaction as 15.25. 2. In vitro experiment with TBA value, garlic oil, alliin and ethanol fracton showed distinctive effect on inhibitory effect of lipoperoxide formation. 3. Comparing with the inhibitory effect of lipoperoxide formation with TBA value in vivo, the ethanol fraction was the most effective in the blood or liver by intraperitoneal administration, whereas the ethanol fraction in the blood and non-kaolin fraction in the liver was most effective each other by orally administration. 4. In vitro experiment with peroxide value, garlic oil was distinctive effect on the inhivitory effect of lipoperoxide formation, which was a similar to the trend of TBA value in vitro. 5. Examining the induction time for the first period of lipoperoxide formation in vitro, garlix oil, ethanol fraction and alliin were effective, which was a similar to the trend of TBA value and peroxide value in vitro.

• Korean Journal of Veterinary Research
• /
• v.36 no.2
• /
• pp.495-511
• /
• 1996

To investigate the effectiveness of the freeze-dried allografts and fibrin glue in bone grafts, the status of new bone formation and union of the grafted bone were observed in three types of grafting bones; autogenic bone(AT), allogenic bone(AL), and allogenic bone particles mixed with fibrin glue(FG). These were transplanted into non-union fracture model of 7 adult dogs with 2cm defect made in the proximal metaphysis of both fibulae. The autogenic and allogenic grafting bones had been treated by a modified freeze-dried method. The serial radiogram were observed the repair process of grafted bones biweekly until 17 or 21 weeks after transplantation and the observation of histological aspects, tetracycline double labeling and microradiography in the grafted bones were undertaken at 17 or 21 weeks after transplantation. The incorporation of bone minerals to the non-union fracture models were accomplished in 4 of 5 cases grafted with AL and in 2 of 4 cases grafted with AT. None of 5 cases grafted with FG were incorporated. The process of new bone formation and resorption in the grafted bones were observed three types; resorption of the grafted bones after newbone formation(type A) in 4 cases, new bone formation after resorption(type B) in 2 cases and complete or incomplete resorption without new bone formation(type C) in 8 cases. The modified freeze-dried method used in this study contributed to inhibite the rejection in allogenic grafts but the union period of the grafted freeze-dried bone was more prolonged than that of fresh autografts. Fibrin glue did not contribute to induce a new bone formation ofbone grafts.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.68.3-68.3
• /
• 2019

We present the preliminary results on the formation of star clusters by cloud-cloud collision. For this purpose, we perform sub-parsec scale, radiation-hydrodynamic simulations of giant molecular clouds using a sink particle algorithm. The simulations include photo-ionization, direct radiation pressure, and non-thermal radiation pressure from infrared and Lyman alpha photons. We confirm that radiation feedback from massive stars suppresses accretion onto sink particles. We examine the collision-induced star formation and discuss the possibility on the formation of a globular cluster.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.3
• /
• pp.61-66
• /
• 2015

Recently, the major trends of NIL are high throughput and large area patterning. For UV NIL, if it can be proceeded in the non-vacuum environment, which greatly simplifies tool construction and greatly shorten process times. However, one key issue in non-vacuum environment is air bubble formation problem. In this paper, numerical analysis of bubble defect of UV NIL is performed. Fluent, flow analysis focused program was utilized and VOF (Volume of Fluid) skill was applied. For various resist-substrate and resist-mold angles, effects of velocity inlet and residual layer thickness of resist on bubble defect formation were investigated. The numerical analyses show that the increases of velocity inlet and residual layer thickness can cause the bubble defect formation, however the decreases of velocity inlet and residual layer thickness take no difference in the bubble defect formation.

• 전기의세계
• /
• v.25 no.1
• /
• pp.104-107
• /
• 1976

The switching characteristics of Non-crystalline As-Te-Si-Ge thin film device using Ag, In and Al metal for electrode, has been investigated. Threshold voltage and holding current of each sandwich type device varied due the to formation of the potential barrier in between non crystalline solid and electrode interface.

• The Plant Pathology Journal
• /
• v.21 no.3
• /
• pp.237-243
• /
• 2005

Resistance inductions on the leaves of cucumber plant by an arbuscular mycorrhiza Glomus intraradices were investigated. In addition, the infection structures were observed at the penetration sites on the leaves of plant inoculated with Colletotrichum orbiculare using a fluorescence microscope. The severity of anthracnose disease caused by Colletotrichum orbiculare was significantly decreased on the leaves of cucumber plant colonized with G intraradices compared with those of non-treated control plants. As a positive control, pre-treatment with DL-3-aminobutyric acid (BABA) caused a remarkable reduction of the disease severity on the pathogen-inoculated leaves. There were no significant differences in the frequency of either germination or appressorium formation of the plant pathogen between mycorrhiza colonized and non-treated plants. It was also the same on the BABA pre-treated plants. However, the frequency of callose formation was significantly high on the leaves of G intraradices colonized plants compared to those of non-treated control plants at 5 days after challenge inoculation. On the leaves of BABA treated plants callose formation was not significantly high than those of non-treated, although the disease severity was more strongly suppressed. It was suggested that the resistance induced by colonization with G. intraradices might be related to the enhancement of callose formation at the penetrate sites on the leaves invaded by the pathogen, whereas resistance by BABA did not.