• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.209-217
• /
• 2010

Recently, some mathematical models for the prediction on progress of carbonation of concrete were reported. These models take account for $CO_2$ diffusion and chemical reaction between $Ca(OH)_2$ and $CO_2$. Based on the assumption that $CO_2$ diffuses in the carbonation zone and reacts with $Ca(OH)_2$ at the outer face of carbonation zone and non-carbonation zone. In this study, a mathematical model to predict the progress of carbonation of concrete has been established based on the reducing concentration of $Ca(OH)_2$ in the carbonation progress zone, where $Ca(OH)_2$ reacts with $CO_2$ and $Ca(OH)_2$ and $CaCO_3$ coexist. Also, the prediction model of carbonation progress rate of concrete using the air permeability coefficient regarding to $CO_2$ diffusion is developed. As a result of this study, an expression, the model equation is obtained for the prediction of carbonation based on the time and interaction velocity between $CO_2$ and Ca(OH)$_2$ dependent air permeability coefficient. The prediction by the model satisfied the experimental data of the accelerated carbonation for painted concrete. Consequently, the model can predict the rate of carbonation and the potential service life of concrete structure exposed to atmosphere.

• Journal of the Korean Society of Food Culture
• /
• v.19 no.5
• /
• pp.506-515
• /
• 2004

This study was carried on the quality characteristics of cake prepared with Co(com oil) containing MCT(medium chain triglycerides), which is used as a fat substitute. In tile cake prepared with MCT-CO containing $10{\sim}30%$ MCT, the appearance and the degree of gelatinization were similar to those of cake prepared with NS-CO(non-substituted corn ell) Cake batter prepared with MCT-CO showed higher specific gravity and consistency than those of cake prepared with NS-CO and increased by increasing MCT contents. The baking loss of cake prepared with MCT-CO was more than that of cake prepared with NS-CO and increased by increasing MCT contents as well. The rheological properties of cake represented significant different by MCT substitution ratio(p<0.05). Gumminess, hardness and chewiness of cake prepared with MCT-CO containing $20{\sim}30%$ MCT were about 2 times higher than those of cake prepared with NS-CO, while springiness and cohesiveness showed similar pattern between the cake prepared with MCT-CO or NS-CO. In sensory evaluation, appearance. color and flavor of cake prepared with CO substituted by MCT up to 100% were better assessed and the taste was better in range of 30% MCT-CO but the texture was less accepted than that of cake prepared with NS-CO.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.3
• /
• pp.184-189
• /
• 2007

The importance of secondary battery industry is getting excited according to the development of battery industry as a high efficiency energy supplier of electronic machine of mobile information such as mobile phone, lap-top computer, PDA. It is rasing the interest about security of safety and high efficiency of cathode material for main part of secondary lithium battery. The cathode material which has been used like $LiCoO_2,\;LiMn_2O_4,\;LiNi_xCo_yMn_zO_2,\;LiNi_xCo_yM_zO_2$ (M=Al, Zr, Mg etc.,) the most typical material is $LiCoO_2$. But it is studying the development of substitute such as efficiency amelioration of $LiCoO_2$, thetiary element, olivine element because of the capacity of $LiCoO_2$, the matter of security; especially the betterment of efficiency, security research of safety has been actively processed in domestic and overseas about surface coating treatment of active cathode which is using oxide ($M_xO_3$). This study analyses side effect of battery according to increase of surface treatment, formation of precipitation for reagent condensation, non-reagent residue of oxide ($M_xO_3$) which is remains during the surface treatment of $LiCoO_2$; conducts study of new process, the consideration of the electrochemical property to improve oxide solution of mixing rate, mixture of surface treatment, dryness, calcinations conditionetc.

• Journal of Embryo Transfer
• /
• v.15 no.2
• /
• pp.129-136
• /
• 2000

This study was carried out to investigate the effect of biological factors on the in vitro production(IVP) of bovine oocytes for development of simple culture methods and medium. Oocytes from the slaughterhouse ovaries were matured and fertilized using general protocol and this study was examined if there were necessary to co-culture, media change, media type and embryo density. This results were as follows: 1. The development rate according to co-culture with cumulus cells and non co-culture as drop culture was not significantly different in cleavage (68.9 vs 71.7%), 8-cell stage (41.2 vs 44.1%) and blastocyst stage (12.2 vs 13.8%), respectively (p<0.05) 2. The blastocyst development rates in YS and CRIaa were higher than that in TCM199 (12.4, 10.4$ vs 3.7%), but the cleavage (69.0, 77.8 and 61.0%) and 8-cell stage (31.7, 37.0 and 35.7%) development accoring to YS, TCM199 and CRIaa ws not significantly different, respectively (p<0.05). 3. There was no significantly different in cleavage (62.6, 59.5 and 61.2%), 8-cell(34.7, 37.9 and 34.0%) and blastocyst (9.5, 11.6 and 12.8%) development among medium change time as control, Group I and Group II, respectively (p<0.05). 4. Blastocyst formation of 8-cell stage according to embryo density was not significantly different in 1, 10 and 25 embryos (27.3, 22.5 and 34.0%), respectively (p<0.05). These results indicated that simple culture system could reduce bovine IVP embryos as drop culture as non co-culture system, high density embryo (25 embryos/50 $\mu$1 drop). YS defined medium and no medium change for whole culture period, although other biological factors need to examine in order to produce efficient IVP bovine embryos.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3079-3089
• /
• 2015

In this paper, a smart constrained application protocol (CoAP)-based gateway with a border router is proposed for home safety services to remotely monitor the trespass, fire, and indoor air quality. The smart CoAP gateway controls a home safety sensor node with a pyroelectric infrared motion sensor, a fire sensor, a humidity and temperature sensor, and a non-dispersive infrared CO2 sensor and gathers sensing data from them. In addition, it can convert physical sensing data into understandable information and perform packet conversion as a border router for seamless connection between a low-power wireless personal area network (6LoWPAN) and the Internet (IPv6). Implementation and laboratory test results verify the feasibility of the smart CoAP gateway which especially can provide about 97.20% data throughput.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.2
• /
• pp.73-80
• /
• 2002

Cefuroxime axetil is a cephalosporin antibiotic having a high activity against a wide spectrum of Grampositive and Gram-negative microorganisms. It is a cephalosporin antibiotic which exist as 2 diastereoisomers: diastereoisomer A and B. It shows polymorphism of three forms: a crystalline form having a melting point of about $180^{\circ}C$, a substantially amorphous form having a high melting point of about $135^{\circ}C$ and a substantially amorphous form having a low melting point of about 70^{\circ}C$. The crystalline form of cefuroxime axetil is slightly soluble in water because diastereoisomer A has lower solubility than B in water. Substantially amorphous form of which there are no difference in solubility between diastereoisomer A and B has better solubility than crystalline form, but it forms a thicker gel than crystalline form upon contact with an aqueous medium. Based on this reason, cefuroxime axetil is not readily absorbable in the gastrointestinal tract, rendering its bioavailability on oral administration very low. The object of this study was to develop an improved non-crystalline cefuroxime axetil composition having a high physicochemical stability and bioavailability. A non-crystalline cefuroxime axetil solid dispersant showing no peak on a Differential Scanning Calorimetry (DSC) scan is prepared by dissolving cefuroxime axetil and a surfactant in an organic solvent; suspending a water-insoluble inorganic carrier in the resulting solution; and spray drying the resulting suspension to remove the organic solvent, said solid dispersant having an enhanced dissolution and stability of cefuroxime axetil and being useful for the preparation of a pharmaceutical composition for oral administration. Tablet was formulated with this cefuroxime axetil solid dispersant, disintegrants and other ingredients. It disintegrated and dissolved easily and dynamically in dissolution medium, so showed a good dissolution profile.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.195-198
• /
• 2014

$Fuel/N_2$ and fuel/air mixtures were treated with non-thermal DBD plasma and the changes in characteristics of laminar diffusion flame have been observed. Flame of $Fuel/N_2$ mixture generated more soot under plasma condition while less amount of soot was formed from fuel/air mixture flame. Luminescence spectrum and gas chromatography results confirmed that plasma energy converts a fraction of fuel molecules into radicals, which then form $C_2$, $C_3$, $C_4$ and higher hydrocarbon under no oxygen condition or turn into CO, $CO_2$ and $H_2O$ when oxygen is present.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.380-385
• /
• 2009

The absorption rate of carbon dioxide with 2-amino-2-methyl-1-propanol(AMP) was measured in such non-aqueous solvents as methanol, ethanol, n-propanol, n-butanol, ethylene glycol, propylene glycol, and propylene carbonate, and in water at 298 K and 101.3 kPa using a semi-batch stirred tank with a plane gas-liquid interface. The overall reaction rate constant, obtained under the condition of fast reaction regime, from the measured rate of absorption was used to get the elementary reaction rate constants in complicated reactions represented by reaction mechanism of carbamate formation and the order of overall reaction of $CO_2$ with amine. The correlation between the elementary reaction rate constant and the solubility parameter of the solvent was also presented.

• Carbon letters
• /
• v.26
• /
• pp.74-80
• /
• 2018

The South Korean Ministry of the Environment has revised the laws relating to the management of interior air quality for multiple use facilities, and recommends maintaining carbon dioxide ($CO_2$) concentration in passenger vehicles below 1000 ppm during operation in urban areas of large cities. However, the interior $CO_2$ concentration of passenger vehicles can rapidly increase and exceed 5000 ppm within 30 min, as observed when two passengers are traveling in urban areas of the South Korean city of Jeonju with the air conditioner blower turned off and the actuator mode set to internal circulation mode. With four passengers, $CO_2$ concentration can reach up to 6000 ppm within 10 min. To counter this, when the actuator is set to external mode, $CO_2$ concentration can be maintained below 1000 ppm, even after a long period of running time. As part of the air conditioning system, alkali-treated activated carbon fiber filters are considered to be far superior to the commercial non-woven filters or combination filters currently commonly in use.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1470-1471
• /
• 2008

We present a front-side micromachined thermopile with high sensitivity in the 3-5${\mu}m$ window, and discuss its application to a novel non-dispersive infrared (NDIR) $CO_2$ gas sensor with a light source emitting collimated light. The micromachined thermopile shows a measured sensitivity of 30 mV/W and a $D^*$ of $0.3{\times}10^8cm^{\surd}Hz/W$. Using this newly fabricated thermopile, we also have successfully developed a small, sensitive NDIR $CO_2$ detector module for accurate air quality monitoring systems in energy-saving building and automotive applications. The novel sample cavity comprising specular reflectors around the light bulb is configured to uniformly emit collimated light into the entrance aperture of the cavity in order to enhance the sensitivity of NDIR $CO_2$ detector.